#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by Autoconf 2.52.
#
# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.

# Find the correct PATH separator.  Usually this is `:', but
# DJGPP uses `;' like DOS.
if test "X${PATH_SEPARATOR+set}" != Xset; then
  UNAME=${UNAME-`uname 2>/dev/null`}
  case X$UNAME in
    *-DOS) lt_cv_sys_path_separator=';' ;;
    *)     lt_cv_sys_path_separator=':' ;;
  esac
fi

# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}

case X$ECHO in
X*--fallback-echo)
  # Remove one level of quotation (which was required for Make).
  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
  ;;
esac

echo=${ECHO-echo}
if test "X$1" = X--no-reexec; then
  # Discard the --no-reexec flag, and continue.
  shift
elif test "X$1" = X--fallback-echo; then
  # Avoid inline document here, it may be left over
  :
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
  # Yippee, $echo works!
  :
else
  # Restart under the correct shell.
  exec $SHELL "$0" --no-reexec ${1+"$@"}
fi

if test "X$1" = X--fallback-echo; then
  # used as fallback echo
  shift
  cat <<EOF

EOF
  exit 0
fi

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi

if test -z "$ECHO"; then
if test "X${echo_test_string+set}" != Xset; then
# find a string as large as possible, as long as the shell can cope with it
  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
       echo_test_string="`eval $cmd`" &&
       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
    then
      break
    fi
  done
fi

if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
   test "X$echo_testing_string" = "X$echo_test_string"; then
  :
else
  # The Solaris, AIX, and Digital Unix default echo programs unquote
  # backslashes.  This makes it impossible to quote backslashes using
  #   echo "$something" | sed 's/\\/\\\\/g'
  #
  # So, first we look for a working echo in the user's PATH.

  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
  for dir in $PATH /usr/ucb; do
    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
      echo="$dir/echo"
      break
    fi
  done
  IFS="$save_ifs"

  if test "X$echo" = Xecho; then
    # We didn't find a better echo, so look for alternatives.
    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
      # This shell has a builtin print -r that does the trick.
      echo='print -r'
    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
	 test "X$CONFIG_SHELL" != X/bin/ksh; then
      # If we have ksh, try running configure again with it.
      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
      export ORIGINAL_CONFIG_SHELL
      CONFIG_SHELL=/bin/ksh
      export CONFIG_SHELL
      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
    else
      # Try using printf.
      echo='printf %s\n'
      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
	 test "X$echo_testing_string" = "X$echo_test_string"; then
	# Cool, printf works
	:
      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
	   test "X$echo_testing_string" = 'X\t' &&
	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
	   test "X$echo_testing_string" = "X$echo_test_string"; then
	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
	export CONFIG_SHELL
	SHELL="$CONFIG_SHELL"
	export SHELL
	echo="$CONFIG_SHELL $0 --fallback-echo"
      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
	   test "X$echo_testing_string" = 'X\t' &&
	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
	   test "X$echo_testing_string" = "X$echo_test_string"; then
	echo="$CONFIG_SHELL $0 --fallback-echo"
      else
	# maybe with a smaller string...
	prev=:

	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
	  then
	    break
	  fi
	  prev="$cmd"
	done

	if test "$prev" != 'sed 50q "$0"'; then
	  echo_test_string=`eval $prev`
	  export echo_test_string
	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
	else
	  # Oops.  We lost completely, so just stick with echo.
	  echo=echo
	fi
      fi
    fi
  fi
fi
fi

# Copy echo and quote the copy suitably for passing to libtool from
# the Makefile, instead of quoting the original, which is used later.
ECHO=$echo
if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
fi

# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

# Sed expression to map a string onto a valid variable name.
as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"

# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
  set -o posix
fi

# Name of the executable.
as_me=`echo "$0" |sed 's,.*[\\/],,'`

if expr a : '\(a\)' >/dev/null 2>&1; then
  as_expr=expr
else
  as_expr=false
fi

rm -f conf$$ conf$$.exe conf$$.file
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
  # We could just check for DJGPP; but this test a) works b) is more generic
  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
  if test -f conf$$.exe; then
    # Don't use ln at all; we don't have any links
    as_ln_s='cp -p'
  else
    as_ln_s='ln -s'
  fi
elif ln conf$$.file conf$$ 2>/dev/null; then
  as_ln_s=ln
else
  as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.file

as_executable_p="test -f"

# Support unset when possible.
if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
  as_unset=unset
else
  as_unset=false
fi

# NLS nuisances.
$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; }
$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; }
$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; }
$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; }
$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; }
$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; }
$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; }
$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; }

# IFS
# We need space, tab and new line, in precisely that order.
as_nl='
'
IFS=" 	$as_nl"

# CDPATH.
$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; }

# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`

exec 6>&1

#
# Initializations.
#
ac_default_prefix=/usr/local
cross_compiling=no
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}

# Maximum number of lines to put in a shell here document.
# This variable seems obsolete.  It should probably be removed, and
# only ac_max_sed_lines should be used.
: ${ac_max_here_lines=38}

ac_unique_file="idl/Accessibility.idl"

# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
exec_prefix=NONE
no_create=
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
verbose=
x_includes=NONE
x_libraries=NONE

# Installation directory options.
# These are left unexpanded so users can "make install exec_prefix=/foo"
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'

# Identity of this package.
PACKAGE_NAME=
PACKAGE_TARNAME=
PACKAGE_VERSION=
PACKAGE_STRING=
PACKAGE_BUGREPORT=

ac_prev=
for ac_option
do
  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval "$ac_prev=\$ac_option"
    ac_prev=
    continue
  fi

  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case $ac_option in

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir=$ac_optarg ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build_alias ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build_alias=$ac_optarg ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file=$ac_optarg ;;

  --config-cache | -C)
    cache_file=config.cache ;;

  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
  | --da=*)
    datadir=$ac_optarg ;;

  -disable-* | --disable-*)
    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
   { (exit 1); exit 1; }; }
    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
    eval "enable_$ac_feature=no" ;;

  -enable-* | --enable-*)
    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
   { (exit 1); exit 1; }; }
    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
    case $ac_option in
      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
      *) ac_optarg=yes ;;
    esac
    eval "enable_$ac_feature='$ac_optarg'" ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix=$ac_optarg ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he | -h)
    ac_init_help=long ;;
  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
    ac_init_help=recursive ;;
  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
    ac_init_help=short ;;

  -host | --host | --hos | --ho)
    ac_prev=host_alias ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host_alias=$ac_optarg ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir=$ac_optarg ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir=$ac_optarg ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir=$ac_optarg ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir=$ac_optarg ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst \
  | --locals | --local | --loca | --loc | --lo)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
    localstatedir=$ac_optarg ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir=$ac_optarg ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir=$ac_optarg ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix=$ac_optarg ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix=$ac_optarg ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix=$ac_optarg ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name=$ac_optarg ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir=$ac_optarg ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir=$ac_optarg ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site=$ac_optarg ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir=$ac_optarg ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir=$ac_optarg ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target_alias ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target_alias=$ac_optarg ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers | -V)
    ac_init_version=: ;;

  -with-* | --with-*)
    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
      { echo "$as_me: error: invalid package name: $ac_package" >&2
   { (exit 1); exit 1; }; }
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    case $ac_option in
      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
      *) ac_optarg=yes ;;
    esac
    eval "with_$ac_package='$ac_optarg'" ;;

  -without-* | --without-*)
    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
    # Reject names that are not valid shell variable names.
    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
      { echo "$as_me: error: invalid package name: $ac_package" >&2
   { (exit 1); exit 1; }; }
    ac_package=`echo $ac_package | sed 's/-/_/g'`
    eval "with_$ac_package=no" ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes=$ac_optarg ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries=$ac_optarg ;;

  -*) { echo "$as_me: error: unrecognized option: $ac_option
Try \`$0 --help' for more information." >&2
   { (exit 1); exit 1; }; }
    ;;

  *=*)
    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
    # Reject names that are not valid shell variable names.
    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
   { (exit 1); exit 1; }; }
    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
    eval "$ac_envvar='$ac_optarg'"
    export $ac_envvar ;;

  *)
    # FIXME: should be removed in autoconf 3.0.
    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
    ;;

  esac
done

if test -n "$ac_prev"; then
  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
  { echo "$as_me: error: missing argument to $ac_option" >&2
   { (exit 1); exit 1; }; }
fi

# Be sure to have absolute paths.
for ac_var in exec_prefix prefix
do
  eval ac_val=$`echo $ac_var`
  case $ac_val in
    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
    *)  { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2
   { (exit 1); exit 1; }; };;
  esac
done

# Be sure to have absolute paths.
for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
              localstatedir libdir includedir oldincludedir infodir mandir
do
  eval ac_val=$`echo $ac_var`
  case $ac_val in
    [\\/$]* | ?:[\\/]* ) ;;
    *)  { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2
   { (exit 1); exit 1; }; };;
  esac
done

# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
build=$build_alias
host=$host_alias
target=$target_alias

# FIXME: should be removed in autoconf 3.0.
if test "x$host_alias" != x; then
  if test "x$build_alias" = x; then
    cross_compiling=maybe
    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used." >&2
  elif test "x$build_alias" != "x$host_alias"; then
    cross_compiling=yes
  fi
fi

ac_tool_prefix=
test -n "$host_alias" && ac_tool_prefix=$host_alias-

test "$silent" = yes && exec 6>/dev/null

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then its parent.
  ac_prog=$0
  ac_confdir=`echo "$ac_prog" | sed 's%[\\/][^\\/][^\\/]*$%%'`
  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
  srcdir=$ac_confdir
  if test ! -r $srcdir/$ac_unique_file; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
  if test "$ac_srcdir_defaulted" = yes; then
    { echo "$as_me: error: cannot find sources in $ac_confdir or .." >&2
   { (exit 1); exit 1; }; }
  else
    { echo "$as_me: error: cannot find sources in $srcdir" >&2
   { (exit 1); exit 1; }; }
  fi
fi
srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
ac_env_build_alias_set=${build_alias+set}
ac_env_build_alias_value=$build_alias
ac_cv_env_build_alias_set=${build_alias+set}
ac_cv_env_build_alias_value=$build_alias
ac_env_host_alias_set=${host_alias+set}
ac_env_host_alias_value=$host_alias
ac_cv_env_host_alias_set=${host_alias+set}
ac_cv_env_host_alias_value=$host_alias
ac_env_target_alias_set=${target_alias+set}
ac_env_target_alias_value=$target_alias
ac_cv_env_target_alias_set=${target_alias+set}
ac_cv_env_target_alias_value=$target_alias
ac_env_CC_set=${CC+set}
ac_env_CC_value=$CC
ac_cv_env_CC_set=${CC+set}
ac_cv_env_CC_value=$CC
ac_env_CFLAGS_set=${CFLAGS+set}
ac_env_CFLAGS_value=$CFLAGS
ac_cv_env_CFLAGS_set=${CFLAGS+set}
ac_cv_env_CFLAGS_value=$CFLAGS
ac_env_LDFLAGS_set=${LDFLAGS+set}
ac_env_LDFLAGS_value=$LDFLAGS
ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
ac_cv_env_LDFLAGS_value=$LDFLAGS
ac_env_CPPFLAGS_set=${CPPFLAGS+set}
ac_env_CPPFLAGS_value=$CPPFLAGS
ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
ac_cv_env_CPPFLAGS_value=$CPPFLAGS
ac_env_CPP_set=${CPP+set}
ac_env_CPP_value=$CPP
ac_cv_env_CPP_set=${CPP+set}
ac_cv_env_CPP_value=$CPP

#
# Report the --help message.
#
if test "$ac_init_help" = "long"; then
  # Omit some internal or obsolete options to make the list less imposing.
  # This message is too long to be a string in the A/UX 3.1 sh.
  cat <<EOF
\`configure' configures this package to adapt to many kinds of systems.

Usage: $0 [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print \`checking...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for \`--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or \`..']

EOF

  cat <<EOF
Installation directories:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [PREFIX]

By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
an installation prefix other than \`$ac_default_prefix' using \`--prefix',
for instance \`--prefix=\$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:
  --bindir=DIR           user executables [EPREFIX/bin]
  --sbindir=DIR          system admin executables [EPREFIX/sbin]
  --libexecdir=DIR       program executables [EPREFIX/libexec]
  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
  --libdir=DIR           object code libraries [EPREFIX/lib]
  --includedir=DIR       C header files [PREFIX/include]
  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
  --infodir=DIR          info documentation [PREFIX/info]
  --mandir=DIR           man documentation [PREFIX/man]
EOF

  cat <<\EOF

Program names:
  --program-prefix=PREFIX            prepend PREFIX to installed program names
  --program-suffix=SUFFIX            append SUFFIX to installed program names
  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names

X features:
  --x-includes=DIR    X include files are in DIR
  --x-libraries=DIR   X library files are in DIR

System types:
  --build=BUILD     configure for building on BUILD [guessed]
  --host=HOST       build programs to run on HOST [BUILD]
EOF
fi

if test -n "$ac_init_help"; then

  cat <<\EOF

Optional Features:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --enable-maintainer-mode enable make rules and dependencies not useful
                          (and sometimes confusing) to the casual installer
  --enable-platform-gnome-2 enable GNOME 2.x platform default=no
  --enable-compile-warnings=no/minimum/yes/maximum/error	Turn on compiler warnings.
  --enable-iso-c          Try to warn if code is not ISO C
  --enable-static=PKGS  build static libraries default=no
  --enable-shared=PKGS  build shared libraries default=yes
  --enable-fast-install=PKGS  optimize for fast installation default=yes
  --disable-libtool-lock  avoid locking (might break parallel builds)
  --enable-gtk-doc  Use gtk-doc to build documentation default=auto

Optional Packages:
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-gnu-ld           assume the C compiler uses GNU ld default=no
  --with-pic              try to use only PIC/non-PIC objects default=use both
  --with-x                use the X Window System

Some influential environment variables:
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
              headers in a nonstandard directory <include dir>
  CPP         C preprocessor

Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.

EOF
fi

if test "$ac_init_help" = "recursive"; then
  # If there are subdirs, report their specific --help.
  ac_popdir=`pwd`
  for ac_subdir in : $ac_subdirs_all; do test "x$ac_subdir" = x: && continue
    cd $ac_subdir
    # A "../" for each directory in /$ac_subdir.
    ac_dots=`echo $ac_subdir |
             sed 's,^\./,,;s,[^/]$,&/,;s,[^/]*/,../,g'`

    case $srcdir in
    .) # No --srcdir option.  We are building in place.
      ac_sub_srcdir=$srcdir ;;
    [\\/]* | ?:[\\/]* ) # Absolute path.
      ac_sub_srcdir=$srcdir/$ac_subdir ;;
    *) # Relative path.
      ac_sub_srcdir=$ac_dots$srcdir/$ac_subdir ;;
    esac

    # Check for guested configure; otherwise get Cygnus style configure.
    if test -f $ac_sub_srcdir/configure.gnu; then
      echo
      $SHELL $ac_sub_srcdir/configure.gnu  --help=recursive
    elif test -f $ac_sub_srcdir/configure; then
      echo
      $SHELL $ac_sub_srcdir/configure  --help=recursive
    elif test -f $ac_sub_srcdir/configure.ac ||
           test -f $ac_sub_srcdir/configure.in; then
      echo
      $ac_configure --help
    else
      echo "$as_me: WARNING: no configuration information is in $ac_subdir" >&2
    fi
    cd $ac_popdir
  done
fi

test -n "$ac_init_help" && exit 0
if $ac_init_version; then
  cat <<\EOF

Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
EOF
  exit 0
fi
exec 5>config.log
cat >&5 <<EOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by $as_me, which was
generated by GNU Autoconf 2.52.  Invocation command line was

  $ $0 $@

EOF
{
cat <<_ASUNAME
## ---------- ##
## Platform.  ##
## ---------- ##

hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`

/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`

/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`

PATH = $PATH

_ASUNAME
} >&5

cat >&5 <<EOF
## ------------ ##
## Core tests.  ##
## ------------ ##

EOF

# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell meta-characters.
ac_configure_args=
ac_sep=
for ac_arg
do
  case $ac_arg in
  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c) ;;
  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
    ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
    ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
    ac_sep=" " ;;
  *) ac_configure_args="$ac_configure_args$ac_sep$ac_arg"
     ac_sep=" " ;;
  esac
  # Get rid of the leading space.
done

# When interrupted or exit'd, cleanup temporary files, and complete
# config.log.  We remove comments because anyway the quotes in there
# would cause problems or look ugly.
trap 'exit_status=$?
  # Save into config.log some information that might help in debugging.
  echo >&5
  echo "## ----------------- ##" >&5
  echo "## Cache variables.  ##" >&5
  echo "## ----------------- ##" >&5
  echo >&5
  # The following way of writing the cache mishandles newlines in values,
{
  (set) 2>&1 |
    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
    *ac_space=\ *)
      sed -n \
        "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
      ;;
    *)
      sed -n \
        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
      ;;
    esac;
} >&5
  sed "/^$/d" confdefs.h >conftest.log
  if test -s conftest.log; then
    echo >&5
    echo "## ------------ ##" >&5
    echo "## confdefs.h.  ##" >&5
    echo "## ------------ ##" >&5
    echo >&5
    cat conftest.log >&5
  fi
  (echo; echo) >&5
  test "$ac_signal" != 0 &&
    echo "$as_me: caught signal $ac_signal" >&5
  echo "$as_me: exit $exit_status" >&5
  rm -rf conftest* confdefs* core core.* *.core conf$$* $ac_clean_files &&
    exit $exit_status
     ' 0
for ac_signal in 1 2 13 15; do
  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
done
ac_signal=0

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo >confdefs.h

# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    { echo "$as_me:1008: loading site script $ac_site_file" >&5
echo "$as_me: loading site script $ac_site_file" >&6;}
    cat "$ac_site_file" >&5
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  # Some versions of bash will fail to source /dev/null (special
  # files actually), so we avoid doing that.
  if test -f "$cache_file"; then
    { echo "$as_me:1019: loading cache $cache_file" >&5
echo "$as_me: loading cache $cache_file" >&6;}
    case $cache_file in
      [\\/]* | ?:[\\/]* ) . $cache_file;;
      *)                      . ./$cache_file;;
    esac
  fi
else
  { echo "$as_me:1027: creating cache $cache_file" >&5
echo "$as_me: creating cache $cache_file" >&6;}
  >$cache_file
fi

# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
for ac_var in `(set) 2>&1 |
               sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
  eval ac_old_set=\$ac_cv_env_${ac_var}_set
  eval ac_new_set=\$ac_env_${ac_var}_set
  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
  eval ac_new_val="\$ac_env_${ac_var}_value"
  case $ac_old_set,$ac_new_set in
    set,)
      { echo "$as_me:1043: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,set)
      { echo "$as_me:1047: error: \`$ac_var' was not set in the previous run" >&5
echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,);;
    *)
      if test "x$ac_old_val" != "x$ac_new_val"; then
        { echo "$as_me:1053: error: \`$ac_var' has changed since the previous run:" >&5
echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
        { echo "$as_me:1055:   former value:  $ac_old_val" >&5
echo "$as_me:   former value:  $ac_old_val" >&2;}
        { echo "$as_me:1057:   current value: $ac_new_val" >&5
echo "$as_me:   current value: $ac_new_val" >&2;}
        ac_cache_corrupted=:
      fi;;
  esac
  # Pass precious variables to config.status.  It doesn't matter if
  # we pass some twice (in addition to the command line arguments).
  if test "$ac_new_set" = set; then
    case $ac_new_val in
    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"`
      ac_configure_args="$ac_configure_args '$ac_arg'"
      ;;
    *) ac_configure_args="$ac_configure_args $ac_var=$ac_new_val"
       ;;
    esac
  fi
done
if $ac_cache_corrupted; then
  { echo "$as_me:1076: error: changes in the environment can compromise the build" >&5
echo "$as_me: error: changes in the environment can compromise the build" >&2;}
  { { echo "$as_me:1078: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
   { (exit 1); exit 1; }; }
fi

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
  *c*,-n*) ECHO_N= ECHO_C='
' ECHO_T='	' ;;
  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
  *)      ECHO_N= ECHO_C='\c' ECHO_T= ;;
esac
echo "#! $SHELL" >conftest.sh
echo  "exit 0"   >>conftest.sh
chmod +x conftest.sh
if { (echo "$as_me:1098: PATH=\".;.\"; conftest.sh") >&5
  (PATH=".;."; conftest.sh) 2>&5
  ac_status=$?
  echo "$as_me:1101: \$? = $ac_status" >&5
  (exit $ac_status); }; then
  ac_path_separator=';'
else
  ac_path_separator=:
fi
PATH_SEPARATOR="$ac_path_separator"
rm -f conftest.sh

AT_SPI_MAJOR_VERSION=0
AT_SPI_MINOR_VERSION=10
AT_SPI_MICRO_VERSION=0
AT_SPI_INTERFACE_AGE=0
AT_SPI_BINARY_AGE=0
AT_SPI_VERSION="$AT_SPI_MAJOR_VERSION.$AT_SPI_MINOR_VERSION.$AT_SPI_MICRO_VERSION"
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  elif test -f $ac_dir/shtool; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/shtool install -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { { echo "$as_me:1133: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
   { (exit 1); exit 1; }; }
fi
ac_config_guess="$SHELL $ac_aux_dir/config.guess"
ac_config_sub="$SHELL $ac_aux_dir/config.sub"
ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.

# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AmigaOS /C/install, which installs bootblocks on floppy discs
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo "$as_me:1153: checking for a BSD compatible install" >&5
echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
    ac_save_IFS=$IFS; IFS=$ac_path_separator
  for ac_dir in $PATH; do
    IFS=$ac_save_IFS
    # Account for people who put trailing slashes in PATH elements.
    case $ac_dir/ in
    / | ./ | .// | /cC/* \
    | /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* \
    | /usr/ucb/* ) ;;
    *)
      # OSF1 and SCO ODT 3.0 have their own names for install.
      # Don't use installbsd from OSF since it installs stuff as root
      # by default.
      for ac_prog in ginstall scoinst install; do
        if $as_executable_p "$ac_dir/$ac_prog"; then
	  if test $ac_prog = install &&
            grep dspmsg "$ac_dir/$ac_prog" >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  elif test $ac_prog = install &&
	    grep pwplus "$ac_dir/$ac_prog" >/dev/null 2>&1; then
	    # program-specific install script used by HP pwplus--don't use.
	    :
	  else
	    ac_cv_path_install="$ac_dir/$ac_prog -c"
	    break 2
	  fi
	fi
      done
      ;;
    esac
  done

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL=$ac_cv_path_install
  else
    # As a last resort, use the slow shell script.  We don't cache a
    # path for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the path is relative.
    INSTALL=$ac_install_sh
  fi
fi
echo "$as_me:1202: result: $INSTALL" >&5
echo "${ECHO_T}$INSTALL" >&6

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'

echo "$as_me:1213: checking whether build environment is sane" >&5
echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
   if test "$*" = "X"; then
      # -L didn't work.
      set X `ls -t $srcdir/configure conftestfile`
   fi
   if test "$*" != "X $srcdir/configure conftestfile" \
      && test "$*" != "X conftestfile $srcdir/configure"; then

      # If neither matched, then we have a broken ls.  This can happen
      # if, for instance, CONFIG_SHELL is bash and it inherits a
      # broken ls alias from the environment.  This has actually
      # happened.  Such a system could not be considered "sane".
      { { echo "$as_me:1236: error: ls -t appears to fail.  Make sure there is not a broken
alias in your environment" >&5
echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
alias in your environment" >&2;}
   { (exit 1); exit 1; }; }
   fi

   test "$2" = conftestfile
   )
then
   # Ok.
   :
else
   { { echo "$as_me:1249: error: newly created file is older than distributed files!
Check your system clock" >&5
echo "$as_me: error: newly created file is older than distributed files!
Check your system clock" >&2;}
   { (exit 1); exit 1; }; }
fi
rm -f conftest*
echo "$as_me:1256: result: yes" >&5
echo "${ECHO_T}yes" >&6
test "$program_prefix" != NONE &&
  program_transform_name="s,^,$program_prefix,;$program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
# Double any \ or $.  echo might interpret backslashes.
# By default was `s,x,x', remove it if useless.
cat <<\_ACEOF >conftest.sed
s/[\\$]/&&/g;s/;s,x,x,$//
_ACEOF
program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
rm conftest.sed

echo "$as_me:1271: checking whether ${MAKE-make} sets \${MAKE}" >&5
echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.make <<\EOF
all:
	@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
  eval ac_cv_prog_make_${ac_make}_set=yes
else
  eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftest.make
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
  echo "$as_me:1291: result: yes" >&5
echo "${ECHO_T}yes" >&6
  SET_MAKE=
else
  echo "$as_me:1295: result: no" >&5
echo "${ECHO_T}no" >&6
  SET_MAKE="MAKE=${MAKE-make}"
fi

PACKAGE=at-spi

VERSION=$AT_SPI_VERSION

if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
  { { echo "$as_me:1305: error: source directory already configured; run \"make distclean\" there first" >&5
echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
   { (exit 1); exit 1; }; }
fi

cat >>confdefs.h <<EOF
#define PACKAGE "$PACKAGE"
EOF

cat >>confdefs.h <<EOF
#define VERSION "$VERSION"
EOF

missing_dir=`cd $ac_aux_dir && pwd`
echo "$as_me:1319: checking for working aclocal" >&5
echo $ECHO_N "checking for working aclocal... $ECHO_C" >&6
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (aclocal --version) < /dev/null > /dev/null 2>&1; then
   ACLOCAL=aclocal
   echo "$as_me:1326: result: found" >&5
echo "${ECHO_T}found" >&6
else
   ACLOCAL="$missing_dir/missing aclocal"
   echo "$as_me:1330: result: missing" >&5
echo "${ECHO_T}missing" >&6
fi

echo "$as_me:1334: checking for working autoconf" >&5
echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (autoconf --version) < /dev/null > /dev/null 2>&1; then
   AUTOCONF=autoconf
   echo "$as_me:1341: result: found" >&5
echo "${ECHO_T}found" >&6
else
   AUTOCONF="$missing_dir/missing autoconf"
   echo "$as_me:1345: result: missing" >&5
echo "${ECHO_T}missing" >&6
fi

echo "$as_me:1349: checking for working automake" >&5
echo $ECHO_N "checking for working automake... $ECHO_C" >&6
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (automake --version) < /dev/null > /dev/null 2>&1; then
   AUTOMAKE=automake
   echo "$as_me:1356: result: found" >&5
echo "${ECHO_T}found" >&6
else
   AUTOMAKE="$missing_dir/missing automake"
   echo "$as_me:1360: result: missing" >&5
echo "${ECHO_T}missing" >&6
fi

echo "$as_me:1364: checking for working autoheader" >&5
echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (autoheader --version) < /dev/null > /dev/null 2>&1; then
   AUTOHEADER=autoheader
   echo "$as_me:1371: result: found" >&5
echo "${ECHO_T}found" >&6
else
   AUTOHEADER="$missing_dir/missing autoheader"
   echo "$as_me:1375: result: missing" >&5
echo "${ECHO_T}missing" >&6
fi

echo "$as_me:1379: checking for working makeinfo" >&5
echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
   MAKEINFO=makeinfo
   echo "$as_me:1386: result: found" >&5
echo "${ECHO_T}found" >&6
else
   MAKEINFO="$missing_dir/missing makeinfo"
   echo "$as_me:1390: result: missing" >&5
echo "${ECHO_T}missing" >&6
fi

# libtool versioning
LT_RELEASE=$AT_SPI_MAJOR_VERSION.$AT_SPI_MINOR_VERSION
LT_CURRENT=`expr $AT_SPI_MICRO_VERSION - $AT_SPI_INTERFACE_AGE`
LT_REVISION=$AT_SPI_INTERFACE_AGE
LT_AGE=`expr $AT_SPI_BINARY_AGE - $AT_SPI_INTERFACE_AGE`
LT_VERSION_INFO='-version-info ${LT_CURRENT}:${LT_REVISION}:${LT_AGE}'

ac_config_headers="$ac_config_headers config.h"

ac_config_commands="$ac_config_commands default-1"

echo "$as_me:1405: checking whether to enable maintainer-specific portions of Makefiles" >&5
echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
  enableval="$enable_maintainer_mode"
  USE_MAINTAINER_MODE=$enableval
else
  USE_MAINTAINER_MODE=no
fi;
  echo "$as_me:1414: result: $USE_MAINTAINER_MODE" >&5
echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6

if test $USE_MAINTAINER_MODE = yes; then
  MAINTAINER_MODE_TRUE=
  MAINTAINER_MODE_FALSE='#'
else
  MAINTAINER_MODE_TRUE='#'
  MAINTAINER_MODE_FALSE=
fi
  MAINT=$MAINTAINER_MODE_TRUE

if test -n ""; then
    echo "$as_me:1427: checking for intltool >= " >&5
echo $ECHO_N "checking for intltool >= ... $ECHO_C" >&6

    INTLTOOL_REQUIRED_VERSION_AS_INT=`echo  | awk -F. '{ printf "%d", $1 * 100 + $2; }'`
    INTLTOOL_APPLIED_VERSION=`awk -F\" '/\\$VERSION / { printf $2; }'  < intltool-update.in`

    INTLTOOL_APPLIED_VERSION_AS_INT=`awk -F\" '/\\$VERSION / { split($2, VERSION, "."); printf "%d\n", VERSION[1] * 100 + VERSION[2];}' < intltool-update.in`

    if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT"; then
	echo "$as_me:1436: result: $INTLTOOL_APPLIED_VERSION found" >&5
echo "${ECHO_T}$INTLTOOL_APPLIED_VERSION found" >&6
    else
	echo "$as_me:1439: result: $INTLTOOL_APPLIED_VERSION found. Your intltool is too old.  You need intltool  or later." >&5
echo "${ECHO_T}$INTLTOOL_APPLIED_VERSION found. Your intltool is too old.  You need intltool  or later." >&6
	exit 1
    fi
fi

  INTLTOOL_DESKTOP_RULE='%.desktop:   %.desktop.in   $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -d -u -c $(top_builddir)/po/.intltool-merge-cache'
INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -d -u -c $(top_builddir)/po/.intltool-merge-cache'
     INTLTOOL_KEYS_RULE='%.keys:      %.keys.in      $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -k -u -c $(top_builddir)/po/.intltool-merge-cache'
      INTLTOOL_OAF_RULE='%.oaf:       %.oaf.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -o -p'
     INTLTOOL_PONG_RULE='%.pong:      %.pong.in      $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -x -u -c $(top_builddir)/po/.intltool-merge-cache'
   INTLTOOL_SERVER_RULE='%.server:    %.server.in    $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -o -u -c $(top_builddir)/po/.intltool-merge-cache'
    INTLTOOL_SHEET_RULE='%.sheet:     %.sheet.in     $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -x -u -c $(top_builddir)/po/.intltool-merge-cache'
INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -d -u -c $(top_builddir)/po/.intltool-merge-cache'
       INTLTOOL_UI_RULE='%.ui:        %.ui.in        $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -x -u -c $(top_builddir)/po/.intltool-merge-cache'
      INTLTOOL_XML_RULE='%.xml:       %.xml.in       $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -x -u -c $(top_builddir)/po/.intltool-merge-cache'
    INTLTOOL_CAVES_RULE='%.caves:     %.caves.in     $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_MERGE) $(top_srcdir)/po $< $@ -d -u -c $(top_builddir)/po/.intltool-merge-cache'

# Use the tools built into the package, not the ones that are installed.

INTLTOOL_EXTRACT='$(top_builddir)/intltool-extract'
INTLTOOL_MERGE='$(top_builddir)/intltool-merge'
INTLTOOL_UPDATE='$(top_builddir)/intltool-update'

# Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
echo "$as_me:1465: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_INTLTOOL_PERL+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  case $INTLTOOL_PERL in
  [\\/]* | ?:[\\/]*)
  ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path.
  ;;
  *)
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  if $as_executable_p "$ac_dir/$ac_word"; then
   ac_cv_path_INTLTOOL_PERL="$ac_dir/$ac_word"
   echo "$as_me:1482: found $ac_dir/$ac_word" >&5
   break
fi
done

  ;;
esac
fi
INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL

if test -n "$INTLTOOL_PERL"; then
  echo "$as_me:1493: result: $INTLTOOL_PERL" >&5
echo "${ECHO_T}$INTLTOOL_PERL" >&6
else
  echo "$as_me:1496: result: no" >&5
echo "${ECHO_T}no" >&6
fi

if test -z "$INTLTOOL_PERL"; then
   { { echo "$as_me:1501: error: perl not found; required for intltool" >&5
echo "$as_me: error: perl not found; required for intltool" >&2;}
   { (exit 1); exit 1; }; }
fi
if test -z "`$INTLTOOL_PERL -v | fgrep '5.' 2> /dev/null`"; then
   { { echo "$as_me:1506: error: perl 5.x required for intltool" >&5
echo "$as_me: error: perl 5.x required for intltool" >&2;}
   { (exit 1); exit 1; }; }
fi

# Remove file type tags (using []) from po/POTFILES.

# Manually sed perl in so people don't have to put the intltool scripts in AC_OUTPUT.

ac_config_commands="$ac_config_commands default-2"

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
echo "$as_me:1525: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  $as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_CC="${ac_tool_prefix}gcc"
echo "$as_me:1540: found $ac_dir/$ac_word" >&5
break
done

fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
  echo "$as_me:1548: result: $CC" >&5
echo "${ECHO_T}$CC" >&6
else
  echo "$as_me:1551: result: no" >&5
echo "${ECHO_T}no" >&6
fi

fi
if test -z "$ac_cv_prog_CC"; then
  ac_ct_CC=$CC
  # Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo "$as_me:1560: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$ac_ct_CC"; then
  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  $as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_ac_ct_CC="gcc"
echo "$as_me:1575: found $ac_dir/$ac_word" >&5
break
done

fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
  echo "$as_me:1583: result: $ac_ct_CC" >&5
echo "${ECHO_T}$ac_ct_CC" >&6
else
  echo "$as_me:1586: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  CC=$ac_ct_CC
else
  CC="$ac_cv_prog_CC"
fi

if test -z "$CC"; then
  if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
echo "$as_me:1599: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  $as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_CC="${ac_tool_prefix}cc"
echo "$as_me:1614: found $ac_dir/$ac_word" >&5
break
done

fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
  echo "$as_me:1622: result: $CC" >&5
echo "${ECHO_T}$CC" >&6
else
  echo "$as_me:1625: result: no" >&5
echo "${ECHO_T}no" >&6
fi

fi
if test -z "$ac_cv_prog_CC"; then
  ac_ct_CC=$CC
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo "$as_me:1634: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$ac_ct_CC"; then
  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  $as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_ac_ct_CC="cc"
echo "$as_me:1649: found $ac_dir/$ac_word" >&5
break
done

fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
  echo "$as_me:1657: result: $ac_ct_CC" >&5
echo "${ECHO_T}$ac_ct_CC" >&6
else
  echo "$as_me:1660: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  CC=$ac_ct_CC
else
  CC="$ac_cv_prog_CC"
fi

fi
if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo "$as_me:1673: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  ac_prog_rejected=no
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  $as_executable_p "$ac_dir/$ac_word" || continue
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
  ac_prog_rejected=yes
  continue
fi
ac_cv_prog_CC="cc"
echo "$as_me:1693: found $ac_dir/$ac_word" >&5
break
done

if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_CC
  shift
  if test $# != 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    set dummy "$ac_dir/$ac_word" ${1+"$@"}
    shift
    ac_cv_prog_CC="$@"
  fi
fi
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
  echo "$as_me:1715: result: $CC" >&5
echo "${ECHO_T}$CC" >&6
else
  echo "$as_me:1718: result: no" >&5
echo "${ECHO_T}no" >&6
fi

fi
if test -z "$CC"; then
  if test -n "$ac_tool_prefix"; then
  for ac_prog in cl
  do
    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
echo "$as_me:1729: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  $as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
echo "$as_me:1744: found $ac_dir/$ac_word" >&5
break
done

fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
  echo "$as_me:1752: result: $CC" >&5
echo "${ECHO_T}$CC" >&6
else
  echo "$as_me:1755: result: no" >&5
echo "${ECHO_T}no" >&6
fi

    test -n "$CC" && break
  done
fi
if test -z "$CC"; then
  ac_ct_CC=$CC
  for ac_prog in cl
do
  # Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo "$as_me:1768: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$ac_ct_CC"; then
  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  $as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_ac_ct_CC="$ac_prog"
echo "$as_me:1783: found $ac_dir/$ac_word" >&5
break
done

fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
  echo "$as_me:1791: result: $ac_ct_CC" >&5
echo "${ECHO_T}$ac_ct_CC" >&6
else
  echo "$as_me:1794: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  test -n "$ac_ct_CC" && break
done

  CC=$ac_ct_CC
fi

fi

test -z "$CC" && { { echo "$as_me:1806: error: no acceptable cc found in \$PATH" >&5
echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
   { (exit 1); exit 1; }; }

# Provide some information about the compiler.
echo "$as_me:1811:" \
     "checking for C compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (eval echo "$as_me:1814: \"$ac_compiler --version </dev/null >&5\"") >&5
  (eval $ac_compiler --version </dev/null >&5) 2>&5
  ac_status=$?
  echo "$as_me:1817: \$? = $ac_status" >&5
  (exit $ac_status); }
{ (eval echo "$as_me:1819: \"$ac_compiler -v </dev/null >&5\"") >&5
  (eval $ac_compiler -v </dev/null >&5) 2>&5
  ac_status=$?
  echo "$as_me:1822: \$? = $ac_status" >&5
  (exit $ac_status); }
{ (eval echo "$as_me:1824: \"$ac_compiler -V </dev/null >&5\"") >&5
  (eval $ac_compiler -V </dev/null >&5) 2>&5
  ac_status=$?
  echo "$as_me:1827: \$? = $ac_status" >&5
  (exit $ac_status); }

cat >conftest.$ac_ext <<_ACEOF
#line 1831 "configure"
#include "confdefs.h"

int
main ()
{

  ;
  return 0;
}
_ACEOF
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files a.out a.exe"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
echo "$as_me:1847: checking for C compiler default output" >&5
echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
if { (eval echo "$as_me:1850: \"$ac_link_default\"") >&5
  (eval $ac_link_default) 2>&5
  ac_status=$?
  echo "$as_me:1853: \$? = $ac_status" >&5
  (exit $ac_status); }; then
  # Find the output, starting from the most likely.  This scheme is
# not robust to junk in `.', hence go to wildcards (a.*) only as a last
# resort.
for ac_file in `ls a.exe conftest.exe 2>/dev/null;
                ls a.out conftest 2>/dev/null;
                ls a.* conftest.* 2>/dev/null`; do
  case $ac_file in
    *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
    a.out ) # We found the default executable, but exeext='' is most
            # certainly right.
            break;;
    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
          # FIXME: I believe we export ac_cv_exeext for Libtool --akim.
          export ac_cv_exeext
          break;;
    * ) break;;
  esac
done
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
{ { echo "$as_me:1876: error: C compiler cannot create executables" >&5
echo "$as_me: error: C compiler cannot create executables" >&2;}
   { (exit 77); exit 77; }; }
fi

ac_exeext=$ac_cv_exeext
echo "$as_me:1882: result: $ac_file" >&5
echo "${ECHO_T}$ac_file" >&6

# Check the compiler produces executables we can run.  If not, either
# the compiler is broken, or we cross compile.
echo "$as_me:1887: checking whether the C compiler works" >&5
echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
# If not cross compiling, check that we can run a simple program.
if test "$cross_compiling" != yes; then
  if { ac_try='./$ac_file'
  { (eval echo "$as_me:1893: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:1896: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
    cross_compiling=no
  else
    if test "$cross_compiling" = maybe; then
	cross_compiling=yes
    else
	{ { echo "$as_me:1903: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'." >&5
echo "$as_me: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'." >&2;}
   { (exit 1); exit 1; }; }
    fi
  fi
fi
echo "$as_me:1911: result: yes" >&5
echo "${ECHO_T}yes" >&6

rm -f a.out a.exe conftest$ac_cv_exeext
ac_clean_files=$ac_clean_files_save
# Check the compiler produces executables we can run.  If not, either
# the compiler is broken, or we cross compile.
echo "$as_me:1918: checking whether we are cross compiling" >&5
echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
echo "$as_me:1920: result: $cross_compiling" >&5
echo "${ECHO_T}$cross_compiling" >&6

echo "$as_me:1923: checking for executable suffix" >&5
echo $ECHO_N "checking for executable suffix... $ECHO_C" >&6
if { (eval echo "$as_me:1925: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:1928: \$? = $ac_status" >&5
  (exit $ac_status); }; then
  # If both `conftest.exe' and `conftest' are `present' (well, observable)
# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
# work properly (i.e., refer to `conftest.exe'), while it won't with
# `rm'.
for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
  case $ac_file in
    *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
          export ac_cv_exeext
          break;;
    * ) break;;
  esac
done
else
  { { echo "$as_me:1944: error: cannot compute EXEEXT: cannot compile and link" >&5
echo "$as_me: error: cannot compute EXEEXT: cannot compile and link" >&2;}
   { (exit 1); exit 1; }; }
fi

rm -f conftest$ac_cv_exeext
echo "$as_me:1950: result: $ac_cv_exeext" >&5
echo "${ECHO_T}$ac_cv_exeext" >&6

rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
echo "$as_me:1956: checking for object suffix" >&5
echo $ECHO_N "checking for object suffix... $ECHO_C" >&6
if test "${ac_cv_objext+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line 1962 "configure"
#include "confdefs.h"

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.o conftest.obj
if { (eval echo "$as_me:1974: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:1977: \$? = $ac_status" >&5
  (exit $ac_status); }; then
  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
  case $ac_file in
    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;;
    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
       break;;
  esac
done
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
{ { echo "$as_me:1989: error: cannot compute OBJEXT: cannot compile" >&5
echo "$as_me: error: cannot compute OBJEXT: cannot compile" >&2;}
   { (exit 1); exit 1; }; }
fi

rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
echo "$as_me:1996: result: $ac_cv_objext" >&5
echo "${ECHO_T}$ac_cv_objext" >&6
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
echo "$as_me:2000: checking whether we are using the GNU C compiler" >&5
echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
if test "${ac_cv_c_compiler_gnu+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line 2006 "configure"
#include "confdefs.h"

int
main ()
{
#ifndef __GNUC__
       choke me
#endif

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2021: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:2024: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:2027: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:2030: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_compiler_gnu=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_compiler_gnu=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu

fi
echo "$as_me:2042: result: $ac_cv_c_compiler_gnu" >&5
echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
GCC=`test $ac_compiler_gnu = yes && echo yes`
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
CFLAGS="-g"
echo "$as_me:2048: checking whether $CC accepts -g" >&5
echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
if test "${ac_cv_prog_cc_g+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line 2054 "configure"
#include "confdefs.h"

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2066: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:2069: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:2072: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:2075: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_prog_cc_g=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_prog_cc_g=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
fi
echo "$as_me:2085: result: $ac_cv_prog_cc_g" >&5
echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
if test "$ac_test_CFLAGS" = set; then
  CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi
# Some people use a C++ compiler to compile C.  Since we use `exit',
# in C++ we need to declare it.  In case someone uses the same compiler
# for both compiling C and C++ we need to have the C++ compiler decide
# the declaration of exit, since it's the most demanding environment.
cat >conftest.$ac_ext <<_ACEOF
#ifndef __cplusplus
  choke me
#endif
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2112: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:2115: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:2118: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:2121: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  for ac_declaration in \
   ''\
   '#include <stdlib.h>' \
   'extern "C" void std::exit (int) throw (); using std::exit;' \
   'extern "C" void std::exit (int); using std::exit;' \
   'extern "C" void exit (int) throw ();' \
   'extern "C" void exit (int);' \
   'void exit (int);'
do
  cat >conftest.$ac_ext <<_ACEOF
#line 2133 "configure"
#include "confdefs.h"
#include <stdlib.h>
$ac_declaration
int
main ()
{
exit (42);
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2146: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:2149: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:2152: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:2155: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  :
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
continue
fi
rm -f conftest.$ac_objext conftest.$ac_ext
  cat >conftest.$ac_ext <<_ACEOF
#line 2165 "configure"
#include "confdefs.h"
$ac_declaration
int
main ()
{
exit (42);
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2177: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:2180: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:2183: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:2186: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  break
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest.$ac_objext conftest.$ac_ext
done
rm -f conftest*
if test -n "$ac_declaration"; then
  echo '#ifdef __cplusplus' >>confdefs.h
  echo $ac_declaration      >>confdefs.h
  echo '#endif'             >>confdefs.h
fi

else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest.$ac_objext conftest.$ac_ext
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AmigaOS /C/install, which installs bootblocks on floppy discs
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo "$as_me:2225: checking for a BSD compatible install" >&5
echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
    ac_save_IFS=$IFS; IFS=$ac_path_separator
  for ac_dir in $PATH; do
    IFS=$ac_save_IFS
    # Account for people who put trailing slashes in PATH elements.
    case $ac_dir/ in
    / | ./ | .// | /cC/* \
    | /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* \
    | /usr/ucb/* ) ;;
    *)
      # OSF1 and SCO ODT 3.0 have their own names for install.
      # Don't use installbsd from OSF since it installs stuff as root
      # by default.
      for ac_prog in ginstall scoinst install; do
        if $as_executable_p "$ac_dir/$ac_prog"; then
	  if test $ac_prog = install &&
            grep dspmsg "$ac_dir/$ac_prog" >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  elif test $ac_prog = install &&
	    grep pwplus "$ac_dir/$ac_prog" >/dev/null 2>&1; then
	    # program-specific install script used by HP pwplus--don't use.
	    :
	  else
	    ac_cv_path_install="$ac_dir/$ac_prog -c"
	    break 2
	  fi
	fi
      done
      ;;
    esac
  done

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL=$ac_cv_path_install
  else
    # As a last resort, use the slow shell script.  We don't cache a
    # path for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the path is relative.
    INSTALL=$ac_install_sh
  fi
fi
echo "$as_me:2274: result: $INSTALL" >&5
echo "${ECHO_T}$INSTALL" >&6

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'

        echo "$as_me:2285: checking for strerror in -lcposix" >&5
echo $ECHO_N "checking for strerror in -lcposix... $ECHO_C" >&6
if test "${ac_cv_lib_cposix_strerror+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lcposix  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 2293 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char strerror ();
int
main ()
{
strerror ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:2312: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:2315: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:2318: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:2321: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_lib_cposix_strerror=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_cposix_strerror=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:2332: result: $ac_cv_lib_cposix_strerror" >&5
echo "${ECHO_T}$ac_cv_lib_cposix_strerror" >&6
if test $ac_cv_lib_cposix_strerror = yes; then
  LIBS="$LIBS -lcposix"
fi

	if test "${ac_cv_gnome_aclocal_dir+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_cv_gnome_aclocal_dir="$GNOME_COMMON_MACROS_DIR"
fi

	if test "${ac_cv_gnome_aclocal_flags+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_cv_gnome_aclocal_flags="$ACLOCAL_FLAGS"
fi

	GNOME_ACLOCAL_DIR="$ac_cv_gnome_aclocal_dir"
	GNOME_ACLOCAL_FLAGS="$ac_cv_gnome_aclocal_flags"

	ACLOCAL="$ACLOCAL $GNOME_ACLOCAL_FLAGS"

if false; then
  INSIDE_GNOME_DOCU_TRUE=
  INSIDE_GNOME_DOCU_FALSE='#'
else
  INSIDE_GNOME_DOCU_TRUE='#'
  INSIDE_GNOME_DOCU_FALSE=
fi

	# Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
echo "$as_me:2365: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  case $PKG_CONFIG in
  [\\/]* | ?:[\\/]*)
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
  ;;
  *)
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  if $as_executable_p "$ac_dir/$ac_word"; then
   ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
   echo "$as_me:2382: found $ac_dir/$ac_word" >&5
   break
fi
done

  ;;
esac
fi
PKG_CONFIG=$ac_cv_path_PKG_CONFIG

if test -n "$PKG_CONFIG"; then
  echo "$as_me:2393: result: $PKG_CONFIG" >&5
echo "${ECHO_T}$PKG_CONFIG" >&6
else
  echo "$as_me:2396: result: no" >&5
echo "${ECHO_T}no" >&6
fi

	have_pkgconfig=no
	if test -x "$PKG_CONFIG" ; then
	    have_pkgconfig=yes
	else
	    PKG_CONFIG=
	fi
	echo "$as_me:2406: checking for pkg-config" >&5
echo $ECHO_N "checking for pkg-config... $ECHO_C" >&6
	pkgconfig_required_version=0.8.0
	if test x$have_pkgconfig = xyes ; then
	    $PKG_CONFIG --atleast-pkgconfig-version $pkgconfig_required_version
	    if test $? -ne 0; then
		echo "*** Your version of pkg-config is too old. You need version $pkgconfig_required_version or newer."
		echo "*** See http://www.freedesktop.org/software/pkgconfig"
		have_pkgconfig=no
	    fi
	fi
	if test x$have_pkgconfig = xyes ; then
	    echo "$as_me:2418: result: yes" >&5
echo "${ECHO_T}yes" >&6
	else
	    PKG_CONFIG=
	    echo "$as_me:2422: result: not found" >&5
echo "${ECHO_T}not found" >&6
 	    if test xfail = xfail; then
		{ { echo "$as_me:2425: error:
*** You need the latest pkg-config (at least $pkgconfig_required_version).
*** Get the latest version of pkg-config from
*** http://www.freedesktop.org/software/pkgconfig." >&5
echo "$as_me: error:
*** You need the latest pkg-config (at least $pkgconfig_required_version).
*** Get the latest version of pkg-config from
*** http://www.freedesktop.org/software/pkgconfig." >&2;}
   { (exit 1); exit 1; }; }
	    fi
	fi

	if test xyes = xyes ; then
	    platform_gnome_2_default=yes
	else
	    platform_gnome_2_default=no
	fi
	if test xforce = xforce ; then
	    platform_gnome_2="$platform_gnome_2_default";
	else
	    # Check whether --enable-platform-gnome-2 or --disable-platform-gnome-2 was given.
if test "${enable_platform_gnome_2+set}" = set; then
  enableval="$enable_platform_gnome_2"
  platform_gnome_2="$enableval"
else
  platform_gnome_2="$platform_gnome_2_default"
fi;
	fi

if test $platform_gnome_2 = yes; then
  PLATFORM_GNOME_2_TRUE=
  PLATFORM_GNOME_2_FALSE='#'
else
  PLATFORM_GNOME_2_TRUE='#'
  PLATFORM_GNOME_2_FALSE=
fi

	echo "$as_me:2462: checking for GNOME Platform" >&5
echo $ECHO_N "checking for GNOME Platform... $ECHO_C" >&6
	if test $platform_gnome_2 = yes; then
	    echo "$as_me:2465: result: GNOME 2.x" >&5
echo "${ECHO_T}GNOME 2.x" >&6
	    GNOME_INTERFACE_VERSION=2

	# Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
echo "$as_me:2471: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  case $PKG_CONFIG in
  [\\/]* | ?:[\\/]*)
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
  ;;
  *)
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  if $as_executable_p "$ac_dir/$ac_word"; then
   ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
   echo "$as_me:2488: found $ac_dir/$ac_word" >&5
   break
fi
done

  ;;
esac
fi
PKG_CONFIG=$ac_cv_path_PKG_CONFIG

if test -n "$PKG_CONFIG"; then
  echo "$as_me:2499: result: $PKG_CONFIG" >&5
echo "${ECHO_T}$PKG_CONFIG" >&6
else
  echo "$as_me:2502: result: no" >&5
echo "${ECHO_T}no" >&6
fi

	have_pkgconfig=no
	if test -x "$PKG_CONFIG" ; then
	    have_pkgconfig=yes
	else
	    PKG_CONFIG=
	fi
	echo "$as_me:2512: checking for pkg-config" >&5
echo $ECHO_N "checking for pkg-config... $ECHO_C" >&6
	pkgconfig_required_version=0.8.0
	if test x$have_pkgconfig = xyes ; then
	    $PKG_CONFIG --atleast-pkgconfig-version $pkgconfig_required_version
	    if test $? -ne 0; then
		echo "*** Your version of pkg-config is too old. You need version $pkgconfig_required_version or newer."
		echo "*** See http://www.freedesktop.org/software/pkgconfig"
		have_pkgconfig=no
	    fi
	fi
	if test x$have_pkgconfig = xyes ; then
	    echo "$as_me:2524: result: yes" >&5
echo "${ECHO_T}yes" >&6
	else
	    PKG_CONFIG=
	    echo "$as_me:2528: result: not found" >&5
echo "${ECHO_T}not found" >&6
 	    if test xfail = xfail; then
		{ { echo "$as_me:2531: error:
*** You need the latest pkg-config (at least $pkgconfig_required_version).
*** Get the latest version of pkg-config from
*** http://www.freedesktop.org/software/pkgconfig." >&5
echo "$as_me: error:
*** You need the latest pkg-config (at least $pkgconfig_required_version).
*** Get the latest version of pkg-config from
*** http://www.freedesktop.org/software/pkgconfig." >&2;}
   { (exit 1); exit 1; }; }
	    fi
	fi

	else
	    echo "$as_me:2544: result: GNOME 1.x" >&5
echo "${ECHO_T}GNOME 1.x" >&6
	    GNOME_INTERFACE_VERSION=1
	fi

    if test -z "maximum" ; then
	default_compile_warnings=no
    else
	default_compile_warnings="maximum"
    fi

    # Check whether --enable-compile-warnings or --disable-compile-warnings was given.
if test "${enable_compile_warnings+set}" = set; then
  enableval="$enable_compile_warnings"
  enable_compile_warnings="$enableval"
else
  enable_compile_warnings="$default_compile_warnings"
fi;

    warnCFLAGS=
    if test "x$GCC" != xyes; then
	enable_compile_warnings=no
    fi

    warning_flags=
    realsave_CFLAGS="$CFLAGS"

    case "$enable_compile_warnings" in
    no)
	warning_flags=
	;;
    minimum)
	warning_flags="-Wall -Wunused"
	;;
    yes)
	warning_flags="-Wall -Wunused -Wmissing-prototypes -Wmissing-declarations"
	;;
    maximum|error)
	warning_flags="-Wall -Wunused -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith"
	CFLAGS="$warning_flags $CFLAGS"
	for option in -Wsign-promo -Wno-sign-compare; do
		SAVE_CFLAGS="$CFLAGS"
		CFLAGS="$CFLAGS $option"
		echo "$as_me:2587: checking whether gcc understands $option" >&5
echo $ECHO_N "checking whether gcc understands $option... $ECHO_C" >&6
		cat >conftest.$ac_ext <<_ACEOF
#line 2590 "configure"
#include "confdefs.h"

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2602: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:2605: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:2608: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:2611: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  has_option=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
has_option=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
		CFLAGS="$SAVE_CFLAGS"
		echo "$as_me:2621: result: $has_option" >&5
echo "${ECHO_T}$has_option" >&6
		if test $has_option = yes; then
		  warning_flags="$warning_flags $option"
		fi
		unset has_option
		unset SAVE_CFLAGS
	done
	unset option
	if test "$enable_compile_warnings" = "error" ; then
	    warning_flags="$warning_flags -Werror"
	fi
	;;
    *)
	{ { echo "$as_me:2635: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&5
echo "$as_me: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&2;}
   { (exit 1); exit 1; }; }
	;;
    esac
    CFLAGS="$realsave_CFLAGS"
    echo "$as_me:2641: checking what warning flags to pass to the C compiler" >&5
echo $ECHO_N "checking what warning flags to pass to the C compiler... $ECHO_C" >&6
    echo "$as_me:2643: result: $warning_flags" >&5
echo "${ECHO_T}$warning_flags" >&6

    # Check whether --enable-iso-c or --disable-iso-c was given.
if test "${enable_iso_c+set}" = set; then
  enableval="$enable_iso_c"

else
  enable_iso_c=no
fi;

    echo "$as_me:2654: checking what language compliance flags to pass to the C compiler" >&5
echo $ECHO_N "checking what language compliance flags to pass to the C compiler... $ECHO_C" >&6
    complCFLAGS=
    if test "x$enable_iso_c" != "xno"; then
	if test "x$GCC" = "xyes"; then
	case " $CFLAGS " in
	    *\ \	-ansi\ \	*) ;;
	    *) complCFLAGS="$complCFLAGS -ansi" ;;
	esac
	case " $CFLAGS " in
	    *\ \	-pedantic\ \	*) ;;
	    *) complCFLAGS="$complCFLAGS -pedantic" ;;
	esac
	fi
    fi
    echo "$as_me:2669: result: $complCFLAGS" >&5
echo "${ECHO_T}$complCFLAGS" >&6

    WARN_CFLAGS="$warning_flags $complCFLAGS"

# Check whether --enable-static or --disable-static was given.
if test "${enable_static+set}" = set; then
  enableval="$enable_static"
  p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
  enable_static=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_static=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_static=no
fi;
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
  enableval="$enable_shared"
  p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
  enable_shared=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_shared=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_shared=yes
fi;
# Check whether --enable-fast-install or --disable-fast-install was given.
if test "${enable_fast_install+set}" = set; then
  enableval="$enable_fast_install"
  p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
  enable_fast_install=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_fast_install=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_fast_install=yes
fi;
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
  { { echo "$as_me:2742: error: cannot run $ac_config_sub" >&5
echo "$as_me: error: cannot run $ac_config_sub" >&2;}
   { (exit 1); exit 1; }; }

echo "$as_me:2746: checking build system type" >&5
echo $ECHO_N "checking build system type... $ECHO_C" >&6
if test "${ac_cv_build+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_cv_build_alias=$build_alias
test -z "$ac_cv_build_alias" &&
  ac_cv_build_alias=`$ac_config_guess`
test -z "$ac_cv_build_alias" &&
  { { echo "$as_me:2755: error: cannot guess build type; you must specify one" >&5
echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
   { (exit 1); exit 1; }; }
ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
  { { echo "$as_me:2759: error: $ac_config_sub $ac_cv_build_alias failed." >&5
echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed." >&2;}
   { (exit 1); exit 1; }; }

fi
echo "$as_me:2764: result: $ac_cv_build" >&5
echo "${ECHO_T}$ac_cv_build" >&6
build=$ac_cv_build
build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`

echo "$as_me:2771: checking host system type" >&5
echo $ECHO_N "checking host system type... $ECHO_C" >&6
if test "${ac_cv_host+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_cv_host_alias=$host_alias
test -z "$ac_cv_host_alias" &&
  ac_cv_host_alias=$ac_cv_build_alias
ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
  { { echo "$as_me:2780: error: $ac_config_sub $ac_cv_host_alias failed" >&5
echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
   { (exit 1); exit 1; }; }

fi
echo "$as_me:2785: result: $ac_cv_host" >&5
echo "${ECHO_T}$ac_cv_host" >&6
host=$ac_cv_host
host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`

# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
  withval="$with_gnu_ld"
  test "$withval" = no || with_gnu_ld=yes
else
  with_gnu_ld=no
fi;
ac_prog=ld
if test "$GCC" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  echo "$as_me:2802: checking for ld used by GCC" >&5
echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
  case $host in
  *-*-mingw*)
    # gcc leaves a trailing carriage return which upsets mingw
    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
  *)
    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
  esac
  case $ac_prog in
    # Accept absolute paths.
    [\\/]* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  echo "$as_me:2832: checking for GNU ld" >&5
echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
else
  echo "$as_me:2835: checking for non-GNU ld" >&5
echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
fi
if test "${lt_cv_path_LD+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      lt_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi

LD="$lt_cv_path_LD"
if test -n "$LD"; then
  echo "$as_me:2865: result: $LD" >&5
echo "${ECHO_T}$LD" >&6
else
  echo "$as_me:2868: result: no" >&5
echo "${ECHO_T}no" >&6
fi
test -z "$LD" && { { echo "$as_me:2871: error: no acceptable ld found in \$PATH" >&5
echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
   { (exit 1); exit 1; }; }
echo "$as_me:2874: checking if the linker ($LD) is GNU ld" >&5
echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
if test "${lt_cv_prog_gnu_ld+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  lt_cv_prog_gnu_ld=yes
else
  lt_cv_prog_gnu_ld=no
fi
fi
echo "$as_me:2886: result: $lt_cv_prog_gnu_ld" >&5
echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
with_gnu_ld=$lt_cv_prog_gnu_ld

echo "$as_me:2890: checking for $LD option to reload object files" >&5
echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
if test "${lt_cv_ld_reload_flag+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  lt_cv_ld_reload_flag='-r'
fi
echo "$as_me:2897: result: $lt_cv_ld_reload_flag" >&5
echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
reload_flag=$lt_cv_ld_reload_flag
test -n "$reload_flag" && reload_flag=" $reload_flag"

echo "$as_me:2902: checking for BSD-compatible nm" >&5
echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
if test "${lt_cv_path_NM+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$NM"; then
  # Let the user override the test.
  lt_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    tmp_nm=$ac_dir/${ac_tool_prefix}nm
    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      # Tru64's nm complains that /dev/null is an invalid object file
      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
	lt_cv_path_NM="$tmp_nm -B"
	break
      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	lt_cv_path_NM="$tmp_nm -p"
	break
      else
	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi
fi

NM="$lt_cv_path_NM"
echo "$as_me:2938: result: $NM" >&5
echo "${ECHO_T}$NM" >&6

echo "$as_me:2941: checking whether ln -s works" >&5
echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
LN_S=$as_ln_s
if test "$LN_S" = "ln -s"; then
  echo "$as_me:2945: result: yes" >&5
echo "${ECHO_T}yes" >&6
else
  echo "$as_me:2948: result: no, using $LN_S" >&5
echo "${ECHO_T}no, using $LN_S" >&6
fi

echo "$as_me:2952: checking how to recognise dependant libraries" >&5
echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6
if test "${lt_cv_deplibs_check_method+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# ['file_magic [regex]'] -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given egrep regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.

case $host_os in
aix4* | aix5*)
  lt_cv_deplibs_check_method=pass_all
  ;;

beos*)
  lt_cv_deplibs_check_method=pass_all
  ;;

bsdi4*)
  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  lt_cv_file_magic_test_file=/shlib/libc.so
  ;;

cygwin* | mingw* | pw32*)
  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
  lt_cv_file_magic_cmd='$OBJDUMP -f'
  ;;

darwin* | rhapsody*)
  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  case "$host_os" in
  rhapsody* | darwin1.012)
    lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
    ;;
  *) # Darwin 1.3 on
    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
    ;;
  esac
  ;;

freebsd*)
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    case $host_cpu in
    i*86 )
      # Not sure whether the presence of OpenBSD here was a mistake.
      # Let's accept both of them until this is cleared up.
      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
      lt_cv_file_magic_cmd=/usr/bin/file
      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
      ;;
    esac
  else
    lt_cv_deplibs_check_method=pass_all
  fi
  ;;

gnu*)
  lt_cv_deplibs_check_method=pass_all
  ;;

hpux10.20*|hpux11*)
  lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=/usr/lib/libc.sl
  ;;

irix5* | irix6*)
  case $host_os in
  irix5*)
    # this will be overridden with pass_all, but let us keep it just in case
    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
    ;;
  *)
    case $LD in
    *-32|*"-32 ") libmagic=32-bit;;
    *-n32|*"-n32 ") libmagic=N32;;
    *-64|*"-64 ") libmagic=64-bit;;
    *) libmagic=never-match;;
    esac
    # this will be overridden with pass_all, but let us keep it just in case
    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
    ;;
  esac
  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
  lt_cv_deplibs_check_method=pass_all
  ;;

# This must be Linux ELF.
linux-gnu*)
  case $host_cpu in
  alpha* | i*86 | powerpc* | sparc* | ia64* )
    lt_cv_deplibs_check_method=pass_all ;;
  *)
    # glibc up to 2.1.1 does not perform some relocations on ARM
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
  esac
  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
  ;;

netbsd*)
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
  else
    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
  fi
  ;;

newos6*)
  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=/usr/lib/libnls.so
  ;;

osf3* | osf4* | osf5*)
  # this will be overridden with pass_all, but let us keep it just in case
  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
  lt_cv_file_magic_test_file=/shlib/libc.so
  lt_cv_deplibs_check_method=pass_all
  ;;

sco3.2v5*)
  lt_cv_deplibs_check_method=pass_all
  ;;

solaris*)
  lt_cv_deplibs_check_method=pass_all
  lt_cv_file_magic_test_file=/lib/libc.so
  ;;

sysv5uw[78]* | sysv4*uw2*)
  lt_cv_deplibs_check_method=pass_all
  ;;

sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
  case $host_vendor in
  motorola)
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
    ;;
  ncr)
    lt_cv_deplibs_check_method=pass_all
    ;;
  sequent)
    lt_cv_file_magic_cmd='/bin/file'
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
    ;;
  sni)
    lt_cv_file_magic_cmd='/bin/file'
    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
    lt_cv_file_magic_test_file=/lib/libc.so
    ;;
  esac
  ;;
esac

fi
echo "$as_me:3120: result: $lt_cv_deplibs_check_method" >&5
echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method

# Check for command to grab the raw symbol name followed by C symbol from nm.
echo "$as_me:3126: checking command to parse $NM output" >&5
echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6
if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else

# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix.  What could be older than Ultrix?!! ;)]

# Character class describing NM global symbol codes.
symcode='[BCDEGRST]'

# Regexp to match symbols that can be accessed directly from C.
sympat='\([_A-Za-z][_A-Za-z0-9]*\)'

# Transform the above into a raw symbol and a C symbol.
symxfrm='\1 \2\3 \3'

# Transform an extracted symbol line into a proper C declaration
lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"

# Define system-specific variables.
case $host_os in
aix*)
  symcode='[BCDT]'
  ;;
cygwin* | mingw* | pw32*)
  symcode='[ABCDGISTW]'
  ;;
hpux*) # Its linker distinguishes data from code symbols
  lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
  ;;
irix*)
  symcode='[BCDEGRST]'
  ;;
solaris* | sysv5*)
  symcode='[BDT]'
  ;;
sysv4)
  symcode='[DFNSTU]'
  ;;
esac

# Handle CRLF in mingw tool chain
opt_cr=
case $host_os in
mingw*)
  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
  ;;
esac

# If we're using GNU nm, then use its standard symbol codes.
if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
  symcode='[ABCDGISTW]'
fi

# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do

  # Write the raw and C identifiers.
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"

  # Check to see that the pipe works correctly.
  pipe_works=no
  rm -f conftest*
  cat > conftest.$ac_ext <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
EOF

  if { (eval echo "$as_me:3203: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:3206: \$? = $ac_status" >&5
  (exit $ac_status); }; then
    # Now try to grab the symbols.
    nlist=conftest.nm
    if { (eval echo "$as_me:3210: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
  ac_status=$?
  echo "$as_me:3213: \$? = $ac_status" >&5
  (exit $ac_status); } && test -s "$nlist"; then
      # Try sorting and uniquifying the output.
      if sort "$nlist" | uniq > "$nlist"T; then
	mv -f "$nlist"T "$nlist"
      else
	rm -f "$nlist"T
      fi

      # Make sure that we snagged all the symbols we need.
      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
	  cat <<EOF > conftest.$ac_ext
#ifdef __cplusplus
extern "C" {
#endif

EOF
	  # Now generate the symbol file.
	  eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'

	  cat <<EOF >> conftest.$ac_ext
#if defined (__STDC__) && __STDC__
# define lt_ptr_t void *
#else
# define lt_ptr_t char *
# define const
#endif

/* The mapping between symbol names and symbols. */
const struct {
  const char *name;
  lt_ptr_t address;
}
lt_preloaded_symbols[] =
{
EOF
	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext
	  cat <<\EOF >> conftest.$ac_ext
  {0, (lt_ptr_t) 0}
};

#ifdef __cplusplus
}
#endif
EOF
	  # Now try linking the two files.
	  mv conftest.$ac_objext conftstm.$ac_objext
	  save_LIBS="$LIBS"
	  save_CFLAGS="$CFLAGS"
	  LIBS="conftstm.$ac_objext"
	  CFLAGS="$CFLAGS$no_builtin_flag"
	  if { (eval echo "$as_me:3265: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:3268: \$? = $ac_status" >&5
  (exit $ac_status); } && test -s conftest; then
	    pipe_works=yes
	  fi
	  LIBS="$save_LIBS"
	  CFLAGS="$save_CFLAGS"
	else
	  echo "cannot find nm_test_func in $nlist" >&5
	fi
      else
	echo "cannot find nm_test_var in $nlist" >&5
      fi
    else
      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
    fi
  else
    echo "$progname: failed program was:" >&5
    cat conftest.$ac_ext >&5
  fi
  rm -f conftest* conftst*

  # Do not use the global_symbol_pipe unless it works.
  if test "$pipe_works" = yes; then
    break
  else
    lt_cv_sys_global_symbol_pipe=
  fi
done

fi

global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
if test -z "$lt_cv_sys_global_symbol_pipe"; then
  global_symbol_to_cdecl=
else
  global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
fi
if test -z "$global_symbol_pipe$global_symbol_to_cdecl"; then
  echo "$as_me:3306: result: failed" >&5
echo "${ECHO_T}failed" >&6
else
  echo "$as_me:3309: result: ok" >&5
echo "${ECHO_T}ok" >&6
fi

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
echo "$as_me:3318: checking how to run the C preprocessor" >&5
echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
  if test "${ac_cv_prog_CPP+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
      # Double quotes because CPP needs to be expanded
    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
    do
      ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
  # Use a header file that comes with gcc, so configuring glibc
  # with a fresh cross-compiler works.
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp. "Syntax error" is here to catch this case.
  cat >conftest.$ac_ext <<_ACEOF
#line 3339 "configure"
#include "confdefs.h"
#include <assert.h>
                     Syntax error
_ACEOF
if { (eval echo "$as_me:3344: \"$ac_cpp conftest.$ac_ext\"") >&5
  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
  ac_status=$?
  egrep -v '^ *\+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:3350: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null; then
  if test -s conftest.err; then
    ac_cpp_err=$ac_c_preproc_warn_flag
  else
    ac_cpp_err=
  fi
else
  ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
  :
else
  echo "$as_me: failed program was:" >&5
  cat conftest.$ac_ext >&5
  # Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.$ac_ext

  # OK, works on sane cases.  Now check whether non-existent headers
  # can be detected and how.
  cat >conftest.$ac_ext <<_ACEOF
#line 3373 "configure"
#include "confdefs.h"
#include <ac_nonexistent.h>
_ACEOF
if { (eval echo "$as_me:3377: \"$ac_cpp conftest.$ac_ext\"") >&5
  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
  ac_status=$?
  egrep -v '^ *\+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:3383: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null; then
  if test -s conftest.err; then
    ac_cpp_err=$ac_c_preproc_warn_flag
  else
    ac_cpp_err=
  fi
else
  ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
  # Broken: success on invalid input.
continue
else
  echo "$as_me: failed program was:" >&5
  cat conftest.$ac_ext >&5
  # Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.$ac_ext

done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
  break
fi

    done
    ac_cv_prog_CPP=$CPP

fi
  CPP=$ac_cv_prog_CPP
else
  ac_cv_prog_CPP=$CPP
fi
echo "$as_me:3420: result: $CPP" >&5
echo "${ECHO_T}$CPP" >&6
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
  # Use a header file that comes with gcc, so configuring glibc
  # with a fresh cross-compiler works.
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp. "Syntax error" is here to catch this case.
  cat >conftest.$ac_ext <<_ACEOF
#line 3430 "configure"
#include "confdefs.h"
#include <assert.h>
                     Syntax error
_ACEOF
if { (eval echo "$as_me:3435: \"$ac_cpp conftest.$ac_ext\"") >&5
  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
  ac_status=$?
  egrep -v '^ *\+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:3441: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null; then
  if test -s conftest.err; then
    ac_cpp_err=$ac_c_preproc_warn_flag
  else
    ac_cpp_err=
  fi
else
  ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
  :
else
  echo "$as_me: failed program was:" >&5
  cat conftest.$ac_ext >&5
  # Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.$ac_ext

  # OK, works on sane cases.  Now check whether non-existent headers
  # can be detected and how.
  cat >conftest.$ac_ext <<_ACEOF
#line 3464 "configure"
#include "confdefs.h"
#include <ac_nonexistent.h>
_ACEOF
if { (eval echo "$as_me:3468: \"$ac_cpp conftest.$ac_ext\"") >&5
  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
  ac_status=$?
  egrep -v '^ *\+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:3474: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null; then
  if test -s conftest.err; then
    ac_cpp_err=$ac_c_preproc_warn_flag
  else
    ac_cpp_err=
  fi
else
  ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
  # Broken: success on invalid input.
continue
else
  echo "$as_me: failed program was:" >&5
  cat conftest.$ac_ext >&5
  # Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.$ac_ext

done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
  :
else
  { { echo "$as_me:3502: error: C preprocessor \"$CPP\" fails sanity check" >&5
echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;}
   { (exit 1); exit 1; }; }
fi

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

for ac_header in dlfcn.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
echo "$as_me:3516: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
if eval "test \"\${$as_ac_Header+set}\" = set"; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line 3522 "configure"
#include "confdefs.h"
#include <$ac_header>
_ACEOF
if { (eval echo "$as_me:3526: \"$ac_cpp conftest.$ac_ext\"") >&5
  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
  ac_status=$?
  egrep -v '^ *\+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:3532: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null; then
  if test -s conftest.err; then
    ac_cpp_err=$ac_c_preproc_warn_flag
  else
    ac_cpp_err=
  fi
else
  ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
  eval "$as_ac_Header=yes"
else
  echo "$as_me: failed program was:" >&5
  cat conftest.$ac_ext >&5
  eval "$as_ac_Header=no"
fi
rm -f conftest.err conftest.$ac_ext
fi
echo "$as_me:3551: result: `eval echo '${'$as_ac_Header'}'`" >&5
echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
if test `eval echo '${'$as_ac_Header'}'` = yes; then
  cat >>confdefs.h <<EOF
#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
EOF

fi
done

# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
    echo "$as_me:3565: checking for ${ac_tool_prefix}file" >&5
echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  case $MAGIC_CMD in
  /*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
  ;;
  ?:/*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
  ;;
  *)
  ac_save_MAGIC_CMD="$MAGIC_CMD"
  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="/usr/bin:$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/${ac_tool_prefix}file; then
      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
      if test -n "$file_magic_test_file"; then
	case $deplibs_check_method in
	"file_magic "*)
	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
	    egrep "$file_magic_regex" > /dev/null; then
	    :
	  else
	    cat <<EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

EOF
	  fi ;;
	esac
      fi
      break
    fi
  done
  IFS="$ac_save_ifs"
  MAGIC_CMD="$ac_save_MAGIC_CMD"
  ;;
esac
fi

MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
  echo "$as_me:3620: result: $MAGIC_CMD" >&5
echo "${ECHO_T}$MAGIC_CMD" >&6
else
  echo "$as_me:3623: result: no" >&5
echo "${ECHO_T}no" >&6
fi

if test -z "$lt_cv_path_MAGIC_CMD"; then
  if test -n "$ac_tool_prefix"; then
    echo "$as_me:3629: checking for file" >&5
echo $ECHO_N "checking for file... $ECHO_C" >&6
if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  case $MAGIC_CMD in
  /*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
  ;;
  ?:/*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
  ;;
  *)
  ac_save_MAGIC_CMD="$MAGIC_CMD"
  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="/usr/bin:$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/file; then
      lt_cv_path_MAGIC_CMD="$ac_dir/file"
      if test -n "$file_magic_test_file"; then
	case $deplibs_check_method in
	"file_magic "*)
	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
	    egrep "$file_magic_regex" > /dev/null; then
	    :
	  else
	    cat <<EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

EOF
	  fi ;;
	esac
      fi
      break
    fi
  done
  IFS="$ac_save_ifs"
  MAGIC_CMD="$ac_save_MAGIC_CMD"
  ;;
esac
fi

MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
  echo "$as_me:3684: result: $MAGIC_CMD" >&5
echo "${ECHO_T}$MAGIC_CMD" >&6
else
  echo "$as_me:3687: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  else
    MAGIC_CMD=:
  fi
fi

  fi
  ;;
esac

if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo "$as_me:3703: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_RANLIB+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  $as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
echo "$as_me:3718: found $ac_dir/$ac_word" >&5
break
done

fi
fi
RANLIB=$ac_cv_prog_RANLIB
if test -n "$RANLIB"; then
  echo "$as_me:3726: result: $RANLIB" >&5
echo "${ECHO_T}$RANLIB" >&6
else
  echo "$as_me:3729: result: no" >&5
echo "${ECHO_T}no" >&6
fi

fi
if test -z "$ac_cv_prog_RANLIB"; then
  ac_ct_RANLIB=$RANLIB
  # Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo "$as_me:3738: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$ac_ct_RANLIB"; then
  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
else
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  $as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_ac_ct_RANLIB="ranlib"
echo "$as_me:3753: found $ac_dir/$ac_word" >&5
break
done

  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
fi
fi
ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
if test -n "$ac_ct_RANLIB"; then
  echo "$as_me:3762: result: $ac_ct_RANLIB" >&5
echo "${ECHO_T}$ac_ct_RANLIB" >&6
else
  echo "$as_me:3765: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  RANLIB=$ac_ct_RANLIB
else
  RANLIB="$ac_cv_prog_RANLIB"
fi

if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo "$as_me:3777: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_STRIP+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$STRIP"; then
  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  $as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
echo "$as_me:3792: found $ac_dir/$ac_word" >&5
break
done

fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
  echo "$as_me:3800: result: $STRIP" >&5
echo "${ECHO_T}$STRIP" >&6
else
  echo "$as_me:3803: result: no" >&5
echo "${ECHO_T}no" >&6
fi

fi
if test -z "$ac_cv_prog_STRIP"; then
  ac_ct_STRIP=$STRIP
  # Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo "$as_me:3812: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$ac_ct_STRIP"; then
  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
else
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  $as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_ac_ct_STRIP="strip"
echo "$as_me:3827: found $ac_dir/$ac_word" >&5
break
done

  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
  echo "$as_me:3836: result: $ac_ct_STRIP" >&5
echo "${ECHO_T}$ac_ct_STRIP" >&6
else
  echo "$as_me:3839: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  STRIP=$ac_ct_STRIP
else
  STRIP="$ac_cv_prog_STRIP"
fi

enable_dlopen=no
enable_win32_dll=no

# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then
  enableval="$enable_libtool_lock"

fi;
test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
*-*-irix6*)
  # Find out which ABI we are using.
  echo '#line 3863 "configure"' > conftest.$ac_ext
  if { (eval echo "$as_me:3864: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:3867: \$? = $ac_status" >&5
  (exit $ac_status); }; then
    case `/usr/bin/file conftest.$ac_objext` in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  echo "$as_me:3888: checking whether the C compiler needs -belf" >&5
echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
if test "${lt_cv_cc_needs_belf+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else

     ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

     cat >conftest.$ac_ext <<_ACEOF
#line 3901 "configure"
#include "confdefs.h"

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:3913: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:3916: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:3919: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:3922: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  lt_cv_cc_needs_belf=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
lt_cv_cc_needs_belf=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
     ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

fi
echo "$as_me:3938: result: $lt_cv_cc_needs_belf" >&5
echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;

esac

# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='sed -e s/^X//'
sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'

# Same as above, but do not quote variable references.
double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'

# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'

# Constants:
rm="rm -f"

# Global variables:
default_ofile=libtool
can_build_shared=yes

# All known linkers require a `.a' archive for static linking (except M$VC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
ofile="$default_ofile"
with_gnu_ld="$lt_cv_prog_gnu_ld"
need_locks="$enable_libtool_lock"

old_CC="$CC"
old_CFLAGS="$CFLAGS"

# Set sane defaults for various variables
test -z "$AR" && AR=ar
test -z "$AR_FLAGS" && AR_FLAGS=cru
test -z "$AS" && AS=as
test -z "$CC" && CC=cc
test -z "$DLLTOOL" && DLLTOOL=dlltool
test -z "$LD" && LD=ld
test -z "$LN_S" && LN_S="ln -s"
test -z "$MAGIC_CMD" && MAGIC_CMD=file
test -z "$NM" && NM=nm
test -z "$OBJDUMP" && OBJDUMP=objdump
test -z "$RANLIB" && RANLIB=:
test -z "$STRIP" && STRIP=:
test -z "$ac_objext" && ac_objext=o

if test x"$host" != x"$build"; then
  ac_tool_prefix=${host_alias}-
else
  ac_tool_prefix=
fi

# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
case $host_os in
linux-gnu*) ;;
linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
esac

case $host_os in
aix3*)
  # AIX sometimes has problems with the GCC collect2 program.  For some
  # reason, if we set the COLLECT_NAMES environment variable, the problems
  # vanish in a puff of smoke.
  if test "X${COLLECT_NAMES+set}" != Xset; then
    COLLECT_NAMES=
    export COLLECT_NAMES
  fi
  ;;
esac

# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=

if test -n "$RANLIB"; then
  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
  old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
fi

# Allow CC to be a program name with arguments.
set dummy $CC
compiler="$2"

echo "$as_me:4031: checking for objdir" >&5
echo $ECHO_N "checking for objdir... $ECHO_C" >&6
rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
  objdir=.libs
else
  # MS-DOS does not allow filenames that begin with a dot.
  objdir=_libs
fi
rmdir .libs 2>/dev/null
echo "$as_me:4042: result: $objdir" >&5
echo "${ECHO_T}$objdir" >&6

# Check whether --with-pic or --without-pic was given.
if test "${with_pic+set}" = set; then
  withval="$with_pic"
  pic_mode="$withval"
else
  pic_mode=default
fi;
test -z "$pic_mode" && pic_mode=default

# We assume here that the value for lt_cv_prog_cc_pic will not be cached
# in isolation, and that seeing it set (from the cache) indicates that
# the associated values are set (in the cache) correctly too.
echo "$as_me:4057: checking for $compiler option to produce PIC" >&5
echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
if test "${lt_cv_prog_cc_pic+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
   lt_cv_prog_cc_pic=
  lt_cv_prog_cc_shlib=
  lt_cv_prog_cc_wl=
  lt_cv_prog_cc_static=
  lt_cv_prog_cc_no_builtin=
  lt_cv_prog_cc_can_build_shared=$can_build_shared

  if test "$GCC" = yes; then
    lt_cv_prog_cc_wl='-Wl,'
    lt_cv_prog_cc_static='-static'

    case $host_os in
    aix*)
      # Below there is a dirty hack to force normal static linking with -ldl
      # The problem is because libdl dynamically linked with both libc and
      # libC (AIX C++ library), which obviously doesn't included in libraries
      # list by gcc. This cause undefined symbols with -static flags.
      # This hack allows C programs to be linked with "-static -ldl", but
      # we not sure about C++ programs.
      lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
      ;;
    amigaos*)
      # FIXME: we need at least 68020 code to build shared libraries, but
      # adding the `-m68020' flag to GCC prevents building anything better,
      # like `-m68040'.
      lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
      ;;
    beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
      # PIC is the default for these OSes.
      ;;
    darwin* | rhapsody*)
      # PIC is the default on this platform
      # Common symbols not allowed in MH_DYLIB files
      lt_cv_prog_cc_pic='-fno-common'
      ;;
    cygwin* | mingw* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      lt_cv_prog_cc_pic='-DDLL_EXPORT'
      ;;
    sysv4*MP*)
      if test -d /usr/nec; then
	 lt_cv_prog_cc_pic=-Kconform_pic
      fi
      ;;
    *)
      lt_cv_prog_cc_pic='-fPIC'
      ;;
    esac
  else
    # PORTME Check for PIC flags for the system compiler.
    case $host_os in
    aix3* | aix4* | aix5*)
      # All AIX code is PIC.
      if test "$host_cpu" = ia64; then
        # AIX 5 now supports IA64 processor
        lt_cv_prog_cc_static='-Bstatic'
        lt_cv_prog_cc_wl='-Wl,'
      else
        lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
      fi
      ;;

    hpux9* | hpux10* | hpux11*)
      # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
      lt_cv_prog_cc_wl='-Wl,'
      lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
      lt_cv_prog_cc_pic='+Z'
      ;;

    irix5* | irix6*)
      lt_cv_prog_cc_wl='-Wl,'
      lt_cv_prog_cc_static='-non_shared'
      # PIC (with -KPIC) is the default.
      ;;

    cygwin* | mingw* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
      lt_cv_prog_cc_pic='-DDLL_EXPORT'
      ;;

    newsos6)
      lt_cv_prog_cc_pic='-KPIC'
      lt_cv_prog_cc_static='-Bstatic'
      ;;

    osf3* | osf4* | osf5*)
      # All OSF/1 code is PIC.
      lt_cv_prog_cc_wl='-Wl,'
      lt_cv_prog_cc_static='-non_shared'
      ;;

    sco3.2v5*)
      lt_cv_prog_cc_pic='-Kpic'
      lt_cv_prog_cc_static='-dn'
      lt_cv_prog_cc_shlib='-belf'
      ;;

    solaris*)
      lt_cv_prog_cc_pic='-KPIC'
      lt_cv_prog_cc_static='-Bstatic'
      lt_cv_prog_cc_wl='-Wl,'
      ;;

    sunos4*)
      lt_cv_prog_cc_pic='-PIC'
      lt_cv_prog_cc_static='-Bstatic'
      lt_cv_prog_cc_wl='-Qoption ld '
      ;;

    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
      lt_cv_prog_cc_pic='-KPIC'
      lt_cv_prog_cc_static='-Bstatic'
      if test "x$host_vendor" = xsni; then
        lt_cv_prog_cc_wl='-LD'
      else
        lt_cv_prog_cc_wl='-Wl,'
      fi
      ;;

    uts4*)
      lt_cv_prog_cc_pic='-pic'
      lt_cv_prog_cc_static='-Bstatic'
      ;;

    sysv4*MP*)
      if test -d /usr/nec ;then
	lt_cv_prog_cc_pic='-Kconform_pic'
	lt_cv_prog_cc_static='-Bstatic'
      fi
      ;;

    *)
      lt_cv_prog_cc_can_build_shared=no
      ;;
    esac
  fi

fi

if test -z "$lt_cv_prog_cc_pic"; then
  echo "$as_me:4204: result: none" >&5
echo "${ECHO_T}none" >&6
else
  echo "$as_me:4207: result: $lt_cv_prog_cc_pic" >&5
echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6

  # Check to make sure the pic_flag actually works.
  echo "$as_me:4211: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6
  if test "${lt_cv_prog_cc_pic_works+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
      save_CFLAGS="$CFLAGS"
    CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
    cat >conftest.$ac_ext <<_ACEOF
#line 4219 "configure"
#include "confdefs.h"

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:4231: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:4234: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:4237: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:4240: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
        case $host_os in
      hpux9* | hpux10* | hpux11*)
	# On HP-UX, both CC and GCC only warn that PIC is supported... then
	# they create non-PIC objects.  So, if there were any warnings, we
	# assume that PIC is not supported.
	if test -s conftest.err; then
	  lt_cv_prog_cc_pic_works=no
	else
	  lt_cv_prog_cc_pic_works=yes
	fi
	;;
      *)
	lt_cv_prog_cc_pic_works=yes
	;;
      esac

else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
      lt_cv_prog_cc_pic_works=no

fi
rm -f conftest.$ac_objext conftest.$ac_ext
    CFLAGS="$save_CFLAGS"

fi

  if test "X$lt_cv_prog_cc_pic_works" = Xno; then
    lt_cv_prog_cc_pic=
    lt_cv_prog_cc_can_build_shared=no
  else
    lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
  fi

  echo "$as_me:4276: result: $lt_cv_prog_cc_pic_works" >&5
echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6
fi

# Check for any special shared library compilation flags.
if test -n "$lt_cv_prog_cc_shlib"; then
  { echo "$as_me:4282: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5
echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;}
  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$lt_cv_prog_cc_shlib[ 	]" >/dev/null; then :
  else
   { echo "$as_me:4286: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5
echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;}
    lt_cv_prog_cc_can_build_shared=no
  fi
fi

echo "$as_me:4292: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6
if test "${lt_cv_prog_cc_static_works+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
    lt_cv_prog_cc_static_works=no
  save_LDFLAGS="$LDFLAGS"
  LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
  cat >conftest.$ac_ext <<_ACEOF
#line 4301 "configure"
#include "confdefs.h"

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:4313: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:4316: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:4319: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:4322: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  lt_cv_prog_cc_static_works=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
  LDFLAGS="$save_LDFLAGS"

fi

# Belt *and* braces to stop my trousers falling down:
test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
echo "$as_me:4336: result: $lt_cv_prog_cc_static_works" >&5
echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6

pic_flag="$lt_cv_prog_cc_pic"
special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
wl="$lt_cv_prog_cc_wl"
link_static_flag="$lt_cv_prog_cc_static"
no_builtin_flag="$lt_cv_prog_cc_no_builtin"
can_build_shared="$lt_cv_prog_cc_can_build_shared"

# Check to see if options -o and -c are simultaneously supported by compiler
echo "$as_me:4347: checking if $compiler supports -c -o file.$ac_objext" >&5
echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
if test "${lt_cv_compiler_c_o+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else

$rm -r conftest 2>/dev/null
mkdir conftest
cd conftest
echo "int some_variable = 0;" > conftest.$ac_ext
mkdir out
# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
# that will create temporary files in the current directory regardless of
# the output directory.  Thus, making CWD read-only will cause this test
# to fail, enabling locking or at least warning the user not to do parallel
# builds.
chmod -w .
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
compiler_c_o=no
if { (eval echo configure:4367: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
  # The compiler can only warn and ignore the option if not recognized
  # So say no if there are warnings
  if test -s out/conftest.err; then
    lt_cv_compiler_c_o=no
  else
    lt_cv_compiler_c_o=yes
  fi
else
  # Append any errors to the config.log.
  cat out/conftest.err 1>&5
  lt_cv_compiler_c_o=no
fi
CFLAGS="$save_CFLAGS"
chmod u+w .
$rm conftest* out/*
rmdir out
cd ..
rmdir conftest
$rm -r conftest 2>/dev/null

fi

compiler_c_o=$lt_cv_compiler_c_o
echo "$as_me:4391: result: $compiler_c_o" >&5
echo "${ECHO_T}$compiler_c_o" >&6

if test x"$compiler_c_o" = x"yes"; then
  # Check to see if we can write to a .lo
  echo "$as_me:4396: checking if $compiler supports -c -o file.lo" >&5
echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6
  if test "${lt_cv_compiler_o_lo+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else

  lt_cv_compiler_o_lo=no
  save_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -c -o conftest.lo"
  cat >conftest.$ac_ext <<_ACEOF
#line 4406 "configure"
#include "confdefs.h"

int
main ()
{
int some_variable = 0;
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:4418: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:4421: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:4424: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:4427: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
      # The compiler can only warn and ignore the option if not recognized
    # So say no if there are warnings
    if test -s conftest.err; then
      lt_cv_compiler_o_lo=no
    else
      lt_cv_compiler_o_lo=yes
    fi

else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest.$ac_objext conftest.$ac_ext
  CFLAGS="$save_CFLAGS"

fi

  compiler_o_lo=$lt_cv_compiler_o_lo
  echo "$as_me:4447: result: $compiler_c_lo" >&5
echo "${ECHO_T}$compiler_c_lo" >&6
else
  compiler_o_lo=no
fi

# Check to see if we can do hard links to lock some files if needed
hard_links="nottested"
if test "$compiler_c_o" = no && test "$need_locks" != no; then
  # do not overwrite the value of need_locks provided by the user
  echo "$as_me:4457: checking if we can lock with hard links" >&5
echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
  hard_links=yes
  $rm conftest*
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  touch conftest.a
  ln conftest.a conftest.b 2>&5 || hard_links=no
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  echo "$as_me:4465: result: $hard_links" >&5
echo "${ECHO_T}$hard_links" >&6
  if test "$hard_links" = no; then
    { echo "$as_me:4468: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
    need_locks=warn
  fi
else
  need_locks=no
fi

if test "$GCC" = yes; then
  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
  echo "$as_me:4478: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
  echo "int some_variable = 0;" > conftest.$ac_ext
  save_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
  compiler_rtti_exceptions=no
  cat >conftest.$ac_ext <<_ACEOF
#line 4485 "configure"
#include "confdefs.h"

int
main ()
{
int some_variable = 0;
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:4497: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:4500: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:4503: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:4506: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
      # The compiler can only warn and ignore the option if not recognized
    # So say no if there are warnings
    if test -s conftest.err; then
      compiler_rtti_exceptions=no
    else
      compiler_rtti_exceptions=yes
    fi

else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest.$ac_objext conftest.$ac_ext
  CFLAGS="$save_CFLAGS"
  echo "$as_me:4522: result: $compiler_rtti_exceptions" >&5
echo "${ECHO_T}$compiler_rtti_exceptions" >&6

  if test "$compiler_rtti_exceptions" = "yes"; then
    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
  else
    no_builtin_flag=' -fno-builtin'
  fi
fi

# See if the linker supports building shared libraries.
echo "$as_me:4533: checking whether the linker ($LD) supports shared libraries" >&5
echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6

allow_undefined_flag=
no_undefined_flag=
need_lib_prefix=unknown
need_version=unknown
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
archive_cmds=
archive_expsym_cmds=
old_archive_from_new_cmds=
old_archive_from_expsyms_cmds=
export_dynamic_flag_spec=
whole_archive_flag_spec=
thread_safe_flag_spec=
hardcode_into_libs=no
hardcode_libdir_flag_spec=
hardcode_libdir_separator=
hardcode_direct=no
hardcode_minus_L=no
hardcode_shlibpath_var=unsupported
runpath_var=
link_all_deplibs=unknown
always_export_symbols=no
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an egrep regular expression of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced.  Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=

case $host_os in
cygwin* | mingw* | pw32* )
  # FIXME: the MSVC++ port hasn't been tested in a loooong time
  # When not using gcc, we currently assume that we are using
  # Microsoft Visual C++.
  if test "$GCC" != yes; then
    with_gnu_ld=no
  fi
  ;;

esac

ld_shlibs=yes
if test "$with_gnu_ld" = yes; then
  # If archive_cmds runs LD, not CC, wlarc should be empty
  wlarc='${wl}'

  # See if GNU ld supports shared libraries.
  case $host_os in
  aix3* | aix4* | aix5*)
    # On AIX, the GNU linker is very broken
    # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
    ld_shlibs=no
    cat <<EOF 1>&2

*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support.  If you
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.

EOF
    ;;

  amigaos*)
    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes

    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
    # that the semantics of dynamic libraries on AmigaOS, at least up
    # to version 4, is to share data among multiple programs linked
    # with the same dynamic library.  Since this doesn't match the
    # behavior of shared libraries on other platforms, we can use
    # them.
    ld_shlibs=no
    ;;

  beos*)
    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
      allow_undefined_flag=unsupported
      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
      # support --undefined.  This deserves some investigation.  FIXME
      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
    else
      ld_shlibs=no
    fi
    ;;

  cygwin* | mingw* | pw32*)
    # hardcode_libdir_flag_spec is actually meaningless, as there is
    # no search path for DLLs.
    hardcode_libdir_flag_spec='-L$libdir'
    allow_undefined_flag=unsupported
    always_export_symbols=yes

    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
      else $CC -o impgen impgen.c ; fi)~
      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'

    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'

    # cygwin and mingw dlls have different entry points and sets of symbols
    # to exclude.
    # FIXME: what about values for MSVC?
    dll_entry=__cygwin_dll_entry@12
    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
    case $host_os in
    mingw*)
      # mingw values
      dll_entry=_DllMainCRTStartup@12
      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
      ;;
    esac

    # mingw and cygwin differ, and it's simplest to just exclude the union
    # of the two symbol sets.
    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12

    # recent cygwin and mingw systems supply a stub DllMain which the user
    # can override, but on older systems we have to supply one (in ltdll.c)
    if test "x$lt_cv_need_dllmain" = "xyes"; then
      ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < [$]0 > $output_objdir/$soname-ltdll.c~
	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
    else
      ltdll_obj=
      ltdll_cmds=
    fi

    # Extract the symbol export list from an `--export-all' def file,
    # then regenerate the def file from the symbol export list, so that
    # the compiled dll only exports the symbol export list.
    # Be careful not to strip the DATA tag left be newer dlltools.
    export_symbols_cmds="$ltdll_cmds"'
      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'

    # If the export-symbols file already is a .def file (1st line
    # is EXPORTS), use it as is.
    # If DATA tags from a recent dlltool are present, honour them!
    archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
        cp $export_symbols $output_objdir/$soname-def;
      else
        echo EXPORTS > $output_objdir/$soname-def;
        _lt_hint=1;
        cat $export_symbols | while read symbol; do
         set dummy \$symbol;
         case \$# in
           2) echo "   \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
           *) echo "     \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
         esac;
         _lt_hint=`expr 1 + \$_lt_hint`;
        done;
      fi~
      '"$ltdll_cmds"'
      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
    ;;

  netbsd*)
    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
      wlarc=
    else
      archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
    fi
    ;;

  solaris* | sysv5*)
    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
      ld_shlibs=no
      cat <<EOF 1>&2

*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems.  Therefore, libtool
*** is disabling shared libraries support.  We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer.  Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.

EOF
    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
    else
      ld_shlibs=no
    fi
    ;;

  sunos4*)
    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
    wlarc=
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  *)
    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
    else
      ld_shlibs=no
    fi
    ;;
  esac

  if test "$ld_shlibs" = yes; then
    runpath_var=LD_RUN_PATH
    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
    export_dynamic_flag_spec='${wl}--export-dynamic'
    case $host_os in
    cygwin* | mingw* | pw32*)
      # dlltool doesn't understand --whole-archive et. al.
      whole_archive_flag_spec=
      ;;
    *)
      # ancient GNU ld didn't support --whole-archive et. al.
      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
      else
	whole_archive_flag_spec=
      fi
      ;;
    esac
  fi
else
  # PORTME fill in a description of your system's linker (not GNU ld)
  case $host_os in
  aix3*)
    allow_undefined_flag=unsupported
    always_export_symbols=yes
    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
    # Note: this linker hardcodes the directories in LIBPATH if there
    # are no directories specified by -L.
    hardcode_minus_L=yes
    if test "$GCC" = yes && test -z "$link_static_flag"; then
      # Neither direct hardcoding nor static linking is supported with a
      # broken collect2.
      hardcode_direct=unsupported
    fi
    ;;

  aix4* | aix5*)
    # When large executables or shared objects are built, AIX ld can
    # have problems creating the table of contents.  If linking a library
    # or program results in "error TOC overflow" add -mminimal-toc to
    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.

    archive_cmds=''
    hardcode_libdir_separator=':'
    if test "$GCC" = yes; then
      collect2name=`${CC} -print-prog-name=collect2`
      if test -f "$collect2name" && \
	 strings "$collect2name" | grep resolve_lib_name >/dev/null
      then
	# We have reworked collect2
	hardcode_direct=yes
      else
        # We have old collect2
        hardcode_direct=unsupported
        # It fails to find uninstalled libraries when the uninstalled
        # path is not listed in the libpath.  Setting hardcode_minus_L
        # to unsupported forces relinking
        hardcode_minus_L=yes
        hardcode_libdir_flag_spec='-L$libdir'
        hardcode_libdir_separator=
      fi
      shared_flag='-shared'
    else
      if test "$host_cpu" = ia64; then
        shared_flag='-G'
      else
        shared_flag='${wl}-bM:SRE'
      fi
      hardcode_direct=yes
    fi

    if test "$host_cpu" = ia64; then
      # On IA64, the linker does run time linking by default, so we don't
      # have to do anything special.
      aix_use_runtimelinking=no
      exp_sym_flag='-Bexport'
      no_entry_flag=""
    else
      # Test if we are trying to use run time linking, or normal AIX style linking.
      # If -brtl is somewhere in LDFLAGS, we need to do run time linking.
      aix_use_runtimelinking=no
      for ld_flag in $LDFLAGS; do
        if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then
          aix_use_runtimelinking=yes
          break
        fi
      done
      exp_sym_flag='-bexport'
      no_entry_flag='-bnoentry'
    fi
    # It seems that -bexpall can do strange things, so it is better to
    # generate a list of symbols to export.
    always_export_symbols=yes
    if test "$aix_use_runtimelinking" = yes; then
      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
      allow_undefined_flag=' -Wl,-G'
      archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
    else
      if test "$host_cpu" = ia64; then
        hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
       allow_undefined_flag="-znodefs"
        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
      else
        hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
        # Warning - without using the other run time loading flags, -berok will
        #           link without error, but may produce a broken library.
        allow_undefined_flag='${wl}-berok"
        # This is a bit strange, but is similar to how AIX traditionally builds
        # it's shared libraries.
        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
      fi
    fi
    ;;

  amigaos*)
    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes
    # see comment about different semantics on the GNU ld section
    ld_shlibs=no
    ;;

  cygwin* | mingw* | pw32*)
    # When not using gcc, we currently assume that we are using
    # Microsoft Visual C++.
    # hardcode_libdir_flag_spec is actually meaningless, as there is
    # no search path for DLLs.
    hardcode_libdir_flag_spec=' '
    allow_undefined_flag=unsupported
    # Tell ltmain to make .lib files, not .a files.
    libext=lib
    # FIXME: Setting linknames here is a bad hack.
    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
    # The linker will automatically build a .lib file if we build a DLL.
    old_archive_from_new_cmds='true'
    # FIXME: Should let the user specify the lib program.
    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
    fix_srcfile_path='`cygpath -w "$srcfile"`'
    ;;

  darwin* | rhapsody*)
    allow_undefined_flag='-undefined suppress'
    # FIXME: Relying on posixy $() will cause problems for
    #        cross-compilation, but unfortunately the echo tests do not
    #        yet detect zsh echo's removal of \ escapes.
    archive_cmds='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linkopts -install_name $rpath/$soname $(test -n "$verstring" -a x$verstring != x0.0 && echo $verstring)'
    # We need to add '_' to the symbols in $export_symbols first
    #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    whole_archive_flag_spec='-all_load $convenience'
    ;;

  freebsd1*)
    ld_shlibs=no
    ;;

  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
  # support.  Future versions do this automatically, but an explicit c++rt0.o
  # does not break anything, and helps significantly (at the cost of a little
  # extra space).
  freebsd2.2*)
    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
  freebsd2*)
    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
    hardcode_direct=yes
    hardcode_minus_L=yes
    hardcode_shlibpath_var=no
    ;;

  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
  freebsd*)
    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  hpux9* | hpux10* | hpux11*)
    case $host_os in
    hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
    esac
    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
    hardcode_libdir_separator=:
    hardcode_direct=yes
    hardcode_minus_L=yes # Not in the search PATH, but as the default
			 # location of the library.
    export_dynamic_flag_spec='${wl}-E'
    ;;

  irix5* | irix6*)
    if test "$GCC" = yes; then
      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
    else
      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
    fi
    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator=:
    link_all_deplibs=yes
    ;;

  netbsd*)
    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
    else
      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
    fi
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  newsos6)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
    hardcode_direct=yes
    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator=:
    hardcode_shlibpath_var=no
    ;;

  openbsd*)
    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_direct=yes
    hardcode_shlibpath_var=no
    ;;

  os2*)
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_minus_L=yes
    allow_undefined_flag=unsupported
    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
    ;;

  osf3*)
    if test "$GCC" = yes; then
      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
    else
      allow_undefined_flag=' -expect_unresolved \*'
      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
    fi
    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    hardcode_libdir_separator=:
    ;;

  osf4* | osf5*)	# as osf3* with the addition of -msym flag
    if test "$GCC" = yes; then
      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
    else
      allow_undefined_flag=' -expect_unresolved \*'
      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
      $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'

      #Both c and cxx compiler support -rpath directly
      hardcode_libdir_flag_spec='-rpath $libdir'
    fi
    hardcode_libdir_separator=:
    ;;

  sco3.2v5*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_shlibpath_var=no
    runpath_var=LD_RUN_PATH
    hardcode_runpath_var=yes
    ;;

  solaris*)
    no_undefined_flag=' -z defs'
    # $CC -shared without GNU ld will not create a library from C++
    # object files and a static libstdc++, better avoid it by now
    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
    hardcode_libdir_flag_spec='-R$libdir'
    hardcode_shlibpath_var=no
    case $host_os in
    solaris2.[0-5] | solaris2.[0-5].*) ;;
    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
    esac
    link_all_deplibs=yes
    ;;

  sunos4*)
    if test "x$host_vendor" = xsequent; then
      # Use $CC to link under sequent, because it throws in some extra .o
      # files that make .init and .fini sections work.
      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
    else
      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
    fi
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_direct=yes
    hardcode_minus_L=yes
    hardcode_shlibpath_var=no
    ;;

  sysv4)
    if test "x$host_vendor" = xsno; then
      archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linkopts'
      hardcode_direct=yes # is this really true???
    else
      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_direct=no #Motorola manual says yes, but my tests say they lie
    fi
    runpath_var='LD_RUN_PATH'
    hardcode_shlibpath_var=no
    ;;

  sysv4.3*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_shlibpath_var=no
    export_dynamic_flag_spec='-Bexport'
    ;;

  sysv5*)
    no_undefined_flag=' -z text'
    # $CC -shared without GNU ld will not create a library from C++
    # object files and a static libstdc++, better avoid it by now
    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
    hardcode_libdir_flag_spec=
    hardcode_shlibpath_var=no
    runpath_var='LD_RUN_PATH'
    ;;

  uts4*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_shlibpath_var=no
    ;;

  dgux*)
    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
    hardcode_libdir_flag_spec='-L$libdir'
    hardcode_shlibpath_var=no
    ;;

  sysv4*MP*)
    if test -d /usr/nec; then
      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
      hardcode_shlibpath_var=no
      runpath_var=LD_RUN_PATH
      hardcode_runpath_var=yes
      ld_shlibs=yes
    fi
    ;;

  sysv4.2uw2*)
    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
    hardcode_direct=yes
    hardcode_minus_L=no
    hardcode_shlibpath_var=no
    hardcode_runpath_var=yes
    runpath_var=LD_RUN_PATH
    ;;

  sysv5uw7* | unixware7*)
    no_undefined_flag='${wl}-z ${wl}text'
    if test "$GCC" = yes; then
      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
    else
      archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
    fi
    runpath_var='LD_RUN_PATH'
    hardcode_shlibpath_var=no
    ;;

  *)
    ld_shlibs=no
    ;;
  esac
fi
echo "$as_me:5145: result: $ld_shlibs" >&5
echo "${ECHO_T}$ld_shlibs" >&6
test "$ld_shlibs" = no && can_build_shared=no

# Check hardcoding attributes.
echo "$as_me:5150: checking how to hardcode library paths into programs" >&5
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" || \
   test -n "$runpath_var"; then

  # We can hardcode non-existant directories.
  if test "$hardcode_direct" != no &&
     # If the only mechanism to avoid hardcoding is shlibpath_var, we
     # have to relink, otherwise we might link with an installed library
     # when we should be linking with a yet-to-be-installed one
     ## test "$hardcode_shlibpath_var" != no &&
     test "$hardcode_minus_L" != no; then
    # Linking always hardcodes the temporary library directory.
    hardcode_action=relink
  else
    # We can link without hardcoding, and we can hardcode nonexisting dirs.
    hardcode_action=immediate
  fi
else
  # We cannot hardcode anything, or else we can only hardcode existing
  # directories.
  hardcode_action=unsupported
fi
echo "$as_me:5174: result: $hardcode_action" >&5
echo "${ECHO_T}$hardcode_action" >&6

striplib=
old_striplib=
echo "$as_me:5179: checking whether stripping libraries is possible" >&5
echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
  echo "$as_me:5184: result: yes" >&5
echo "${ECHO_T}yes" >&6
else
  echo "$as_me:5187: result: no" >&5
echo "${ECHO_T}no" >&6
fi

reload_cmds='$LD$reload_flag -o $output$reload_objs'
test -z "$deplibs_check_method" && deplibs_check_method=unknown

# PORTME Fill in your ld.so characteristics
echo "$as_me:5195: checking dynamic linker characteristics" >&5
echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
library_names_spec=
libname_spec='lib$name'
soname_spec=
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"

case $host_os in
aix3*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix $libname.a'
  shlibpath_var=LIBPATH

  # AIX has no versioning support, so we append a major version to the name.
  soname_spec='${libname}${release}.so$major'
  ;;

aix4* | aix5*)
  version_type=linux
  if test "$host_cpu" = ia64; then
    # AIX 5 supports IA64
    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
    shlibpath_var=LD_LIBRARY_PATH
  else
    # With GCC up to 2.95.x, collect2 would create an import file
    # for dependence libraries.  The import file would start with
    # the line `#! .'.  This would cause the generated library to
    # depend on `.', always an invalid library.  This was fixed in
    # development snapshots of GCC prior to 3.0.
    case $host_os in
       aix4 | aix4.[01] | aix4.[01].*)
      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
           echo ' yes '
           echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
        :
      else
        can_build_shared=no
      fi
      ;;
    esac
    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
    # soname into executable. Probably we can add versioning support to
    # collect2, so additional links can be useful in future.
    if test "$aix_use_runtimelinking" = yes; then
      # If using run time linking (on AIX 4.2 or later) use lib<name>.so instead of
      # lib<name>.a to let people know that these are not typical AIX shared libraries.
      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
    else
      # We preserve .a as extension for shared libraries through AIX4.2
      # and later when we are not doing run time linking.
      library_names_spec='${libname}${release}.a $libname.a'
      soname_spec='${libname}${release}.so$major'
    fi
    shlibpath_var=LIBPATH
    deplibs_check_method=pass_all
  fi
  ;;

amigaos*)
  library_names_spec='$libname.ixlibrary $libname.a'
  # Create ${libname}_ixlibrary.a entries in /sys/libs.
  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
  ;;

beos*)
  library_names_spec='${libname}.so'
  dynamic_linker="$host_os ld.so"
  shlibpath_var=LIBRARY_PATH
  ;;

bsdi4*)
  version_type=linux
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
  export_dynamic_flag_spec=-rdynamic
  # the default ld.so.conf also contains /usr/contrib/lib and
  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
  # libtool to hard-code these into programs
  ;;

cygwin* | mingw* | pw32*)
  version_type=windows
  need_version=no
  need_lib_prefix=no
  case $GCC,$host_os in
  yes,cygwin*)
    library_names_spec='$libname.dll.a'
    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
      dldir=$destdir/`dirname \$dlpath`~
      test -d \$dldir || mkdir -p \$dldir~
      $install_prog .libs/$dlname \$dldir/$dlname'
    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
      dlpath=$dir/\$dldll~
       $rm \$dlpath'
    ;;
  yes,mingw*)
    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
    ;;
  yes,pw32*)
    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
    ;;
  *)
    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
    ;;
  esac
  dynamic_linker='Win32 ld.exe'
  # FIXME: first we should search . and the directory the executable is in
  shlibpath_var=PATH
  ;;

darwin* | rhapsody*)
  dynamic_linker="$host_os dyld"
  version_type=darwin
  need_lib_prefix=no
  need_version=no
  # FIXME: Relying on posixy $() will cause problems for
  #        cross-compilation, but unfortunately the echo tests do not
  #        yet detect zsh echo's removal of \ escapes.
  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
  shlibpath_overrides_runpath=yes
  shlibpath_var=DYLD_LIBRARY_PATH
  ;;

freebsd1*)
  dynamic_linker=no
  ;;

freebsd*)
  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
  version_type=freebsd-$objformat
  case $version_type in
    freebsd-elf*)
      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
      need_version=no
      need_lib_prefix=no
      ;;
    freebsd-*)
      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
      need_version=yes
      ;;
  esac
  shlibpath_var=LD_LIBRARY_PATH
  case $host_os in
  freebsd2*)
    shlibpath_overrides_runpath=yes
    ;;
  *)
    shlibpath_overrides_runpath=no
    hardcode_into_libs=yes
    ;;
  esac
  ;;

gnu*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  hardcode_into_libs=yes
  ;;

hpux9* | hpux10* | hpux11*)
  # Give a soname corresponding to the major version so that dld.sl refuses to
  # link against other versions.
  dynamic_linker="$host_os dld.sl"
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  shlibpath_var=SHLIB_PATH
  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
  soname_spec='${libname}${release}.sl$major'
  # HP-UX runs *really* slowly unless shared libraries are mode 555.
  postinstall_cmds='chmod 555 $lib'
  ;;

irix5* | irix6*)
  version_type=irix
  need_lib_prefix=no
  need_version=no
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
  case $host_os in
  irix5*)
    libsuff= shlibsuff=
    ;;
  *)
    case $LD in # libtool.m4 will add one of these switches to LD
    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
    *) libsuff= shlibsuff= libmagic=never-match;;
    esac
    ;;
  esac
  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
  shlibpath_overrides_runpath=no
  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
  ;;

# No shared lib support for Linux oldld, aout, or coff.
linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
  dynamic_linker=no
  ;;

# This must be Linux ELF.
linux-gnu*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  # This implies no fast_install, which is unacceptable.
  # Some rework will be needed to allow for fast_install
  # before this can be enabled.
  hardcode_into_libs=yes

  # We used to test for /lib/ld.so.1 and disable shared libraries on
  # powerpc, because MkLinux only supported shared libraries with the
  # GNU dynamic linker.  Since this was broken with cross compilers,
  # most powerpc-linux boxes support dynamic linking these days and
  # people can always --disable-shared, the test was removed, and we
  # assume the GNU/Linux dynamic linker is in use.
  dynamic_linker='GNU/Linux ld.so'
  ;;

netbsd*)
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
    dynamic_linker='NetBSD (a.out) ld.so'
  else
    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
    soname_spec='${libname}${release}.so$major'
    dynamic_linker='NetBSD ld.elf_so'
  fi
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  ;;

newsos6)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  ;;

openbsd*)
  version_type=sunos
  if test "$with_gnu_ld" = yes; then
    need_lib_prefix=no
    need_version=no
  fi
  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

os2*)
  libname_spec='$name'
  need_lib_prefix=no
  library_names_spec='$libname.dll $libname.a'
  dynamic_linker='OS/2 ld.exe'
  shlibpath_var=LIBPATH
  ;;

osf3* | osf4* | osf5*)
  version_type=osf
  need_version=no
  soname_spec='${libname}${release}.so'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
  ;;

sco3.2v5*)
  version_type=osf
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

solaris*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  # ldd complains unless libraries are executable
  postinstall_cmds='chmod +x $lib'
  ;;

sunos4*)
  version_type=sunos
  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  if test "$with_gnu_ld" = yes; then
    need_lib_prefix=no
  fi
  need_version=yes
  ;;

sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  case $host_vendor in
    sni)
      shlibpath_overrides_runpath=no
      ;;
    motorola)
      need_lib_prefix=no
      need_version=no
      shlibpath_overrides_runpath=no
      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
      ;;
  esac
  ;;

uts4*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

dgux*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

sysv4*MP*)
  if test -d /usr/nec ;then
    version_type=linux
    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
    soname_spec='$libname.so.$major'
    shlibpath_var=LD_LIBRARY_PATH
  fi
  ;;

*)
  dynamic_linker=no
  ;;
esac
echo "$as_me:5577: result: $dynamic_linker" >&5
echo "${ECHO_T}$dynamic_linker" >&6
test "$dynamic_linker" = no && can_build_shared=no

# Report the final consequences.
echo "$as_me:5582: checking if libtool supports shared libraries" >&5
echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
echo "$as_me:5584: result: $can_build_shared" >&5
echo "${ECHO_T}$can_build_shared" >&6

if test "$hardcode_action" = relink; then
  # Fast installation is not supported
  enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
     test "$enable_shared" = no; then
  # Fast installation is not necessary
  enable_fast_install=needless
fi

variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi

if test "x$enable_dlopen" != xyes; then
  enable_dlopen=unknown
  enable_dlopen_self=unknown
  enable_dlopen_self_static=unknown
else
  lt_cv_dlopen=no
  lt_cv_dlopen_libs=

  case $host_os in
  beos*)
    lt_cv_dlopen="load_add_on"
    lt_cv_dlopen_libs=
    lt_cv_dlopen_self=yes
    ;;

  cygwin* | mingw* | pw32*)
    lt_cv_dlopen="LoadLibrary"
    lt_cv_dlopen_libs=
   ;;

  *)
    echo "$as_me:5622: checking for dlopen in -ldl" >&5
echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
if test "${ac_cv_lib_dl_dlopen+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 5630 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char dlopen ();
int
main ()
{
dlopen ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:5649: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:5652: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:5655: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:5658: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_lib_dl_dlopen=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_dl_dlopen=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:5669: result: $ac_cv_lib_dl_dlopen" >&5
echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
if test $ac_cv_lib_dl_dlopen = yes; then
  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
  echo "$as_me:5674: checking for dlopen" >&5
echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
if test "${ac_cv_func_dlopen+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line 5680 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char dlopen (); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char dlopen ();
char (*f) ();

int
main ()
{
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_dlopen) || defined (__stub___dlopen)
choke me
#else
f = dlopen;
#endif

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:5711: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:5714: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:5717: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:5720: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_func_dlopen=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_func_dlopen=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:5730: result: $ac_cv_func_dlopen" >&5
echo "${ECHO_T}$ac_cv_func_dlopen" >&6
if test $ac_cv_func_dlopen = yes; then
  lt_cv_dlopen="dlopen"
else
  echo "$as_me:5735: checking for shl_load" >&5
echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
if test "${ac_cv_func_shl_load+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line 5741 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char shl_load (); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char shl_load ();
char (*f) ();

int
main ()
{
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_shl_load) || defined (__stub___shl_load)
choke me
#else
f = shl_load;
#endif

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:5772: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:5775: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:5778: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:5781: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_func_shl_load=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_func_shl_load=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:5791: result: $ac_cv_func_shl_load" >&5
echo "${ECHO_T}$ac_cv_func_shl_load" >&6
if test $ac_cv_func_shl_load = yes; then
  lt_cv_dlopen="shl_load"
else
  echo "$as_me:5796: checking for dlopen in -lsvld" >&5
echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
if test "${ac_cv_lib_svld_dlopen+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lsvld  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 5804 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char dlopen ();
int
main ()
{
dlopen ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:5823: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:5826: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:5829: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:5832: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_lib_svld_dlopen=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_svld_dlopen=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:5843: result: $ac_cv_lib_svld_dlopen" >&5
echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
if test $ac_cv_lib_svld_dlopen = yes; then
  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
else
  echo "$as_me:5848: checking for shl_load in -ldld" >&5
echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
if test "${ac_cv_lib_dld_shl_load+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 5856 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char shl_load ();
int
main ()
{
shl_load ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:5875: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:5878: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:5881: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:5884: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_lib_dld_shl_load=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_dld_shl_load=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:5895: result: $ac_cv_lib_dld_shl_load" >&5
echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
if test $ac_cv_lib_dld_shl_load = yes; then
  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
fi

fi

fi

fi

fi

    ;;
  esac

  if test "x$lt_cv_dlopen" != xno; then
    enable_dlopen=yes
  else
    enable_dlopen=no
  fi

  case $lt_cv_dlopen in
  dlopen)
    save_CPPFLAGS="$CPPFLAGS"
        test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"

    save_LDFLAGS="$LDFLAGS"
    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"

    save_LIBS="$LIBS"
    LIBS="$lt_cv_dlopen_libs $LIBS"

    echo "$as_me:5929: checking whether a program can dlopen itself" >&5
echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
if test "${lt_cv_dlopen_self+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self=cross
else
    lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 5940 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

#ifdef RTLD_GLOBAL
#  define LT_DLGLOBAL		RTLD_GLOBAL
#else
#  ifdef DL_GLOBAL
#    define LT_DLGLOBAL		DL_GLOBAL
#  else
#    define LT_DLGLOBAL		0
#  endif
#endif

/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
   find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
#  ifdef RTLD_LAZY
#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
#  else
#    ifdef DL_LAZY
#      define LT_DLLAZY_OR_NOW		DL_LAZY
#    else
#      ifdef RTLD_NOW
#        define LT_DLLAZY_OR_NOW	RTLD_NOW
#      else
#        ifdef DL_NOW
#          define LT_DLLAZY_OR_NOW	DL_NOW
#        else
#          define LT_DLLAZY_OR_NOW	0
#        endif
#      endif
#    endif
#  endif
#endif

#ifdef __cplusplus
extern "C" void exit (int);
#endif

void fnord() { int i=42;}
int main ()
{
  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
  int status = $lt_dlunknown;

  if (self)
    {
      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
      /* dlclose (self); */
    }

    exit (status);
}
EOF
  if { (eval echo "$as_me:6001: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:6004: \$? = $ac_status" >&5
  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
    (./conftest; exit; ) 2>/dev/null
    lt_status=$?
    case x$lt_status in
      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
    esac
  else :
    # compilation failed
    lt_cv_dlopen_self=no
  fi
fi
rm -fr conftest*

fi
echo "$as_me:6021: result: $lt_cv_dlopen_self" >&5
echo "${ECHO_T}$lt_cv_dlopen_self" >&6

    if test "x$lt_cv_dlopen_self" = xyes; then
      LDFLAGS="$LDFLAGS $link_static_flag"
      echo "$as_me:6026: checking whether a statically linked program can dlopen itself" >&5
echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
if test "${lt_cv_dlopen_self_static+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  	  if test "$cross_compiling" = yes; then :
  lt_cv_dlopen_self_static=cross
else
    lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
  lt_status=$lt_dlunknown
  cat > conftest.$ac_ext <<EOF
#line 6037 "configure"
#include "confdefs.h"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

#ifdef RTLD_GLOBAL
#  define LT_DLGLOBAL		RTLD_GLOBAL
#else
#  ifdef DL_GLOBAL
#    define LT_DLGLOBAL		DL_GLOBAL
#  else
#    define LT_DLGLOBAL		0
#  endif
#endif

/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
   find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
#  ifdef RTLD_LAZY
#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
#  else
#    ifdef DL_LAZY
#      define LT_DLLAZY_OR_NOW		DL_LAZY
#    else
#      ifdef RTLD_NOW
#        define LT_DLLAZY_OR_NOW	RTLD_NOW
#      else
#        ifdef DL_NOW
#          define LT_DLLAZY_OR_NOW	DL_NOW
#        else
#          define LT_DLLAZY_OR_NOW	0
#        endif
#      endif
#    endif
#  endif
#endif

#ifdef __cplusplus
extern "C" void exit (int);
#endif

void fnord() { int i=42;}
int main ()
{
  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
  int status = $lt_dlunknown;

  if (self)
    {
      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
      /* dlclose (self); */
    }

    exit (status);
}
EOF
  if { (eval echo "$as_me:6098: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:6101: \$? = $ac_status" >&5
  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
    (./conftest; exit; ) 2>/dev/null
    lt_status=$?
    case x$lt_status in
      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
    esac
  else :
    # compilation failed
    lt_cv_dlopen_self_static=no
  fi
fi
rm -fr conftest*

fi
echo "$as_me:6118: result: $lt_cv_dlopen_self_static" >&5
echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
    fi

    CPPFLAGS="$save_CPPFLAGS"
    LDFLAGS="$save_LDFLAGS"
    LIBS="$save_LIBS"
    ;;
  esac

  case $lt_cv_dlopen_self in
  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
  *) enable_dlopen_self=unknown ;;
  esac

  case $lt_cv_dlopen_self_static in
  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
  *) enable_dlopen_self_static=unknown ;;
  esac
fi

if test "$enable_shared" = yes && test "$GCC" = yes; then
  case $archive_cmds in
  *'~'*)
    # FIXME: we may have to deal with multi-command sequences.
    ;;
  '$CC '*)
    # Test whether the compiler implicitly links with -lc since on some
    # systems, -lgcc has to come before -lc. If gcc already passes -lc
    # to ld, don't add -lc before -lgcc.
    echo "$as_me:6148: checking whether -lc should be explicitly linked in" >&5
echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
    if test "${lt_cv_archive_cmds_need_lc+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  $rm conftest*
    echo 'static int dummy;' > conftest.$ac_ext

    if { (eval echo "$as_me:6156: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:6159: \$? = $ac_status" >&5
  (exit $ac_status); }; then
      soname=conftest
      lib=conftest
      libobjs=conftest.$ac_objext
      deplibs=
      wl=$lt_cv_prog_cc_wl
      compiler_flags=-v
      linker_flags=-v
      verstring=
      output_objdir=.
      libname=conftest
      save_allow_undefined_flag=$allow_undefined_flag
      allow_undefined_flag=
      if { (eval echo "$as_me:6173: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
  ac_status=$?
  echo "$as_me:6176: \$? = $ac_status" >&5
  (exit $ac_status); }
      then
	lt_cv_archive_cmds_need_lc=no
      else
	lt_cv_archive_cmds_need_lc=yes
      fi
      allow_undefined_flag=$save_allow_undefined_flag
    else
      cat conftest.err 1>&5
    fi
fi

    echo "$as_me:6189: result: $lt_cv_archive_cmds_need_lc" >&5
echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6
    ;;
  esac
fi
need_lc=${lt_cv_archive_cmds_need_lc-yes}

# The second clause should only fire when bootstrapping the
# libtool distribution, otherwise you forgot to ship ltmain.sh
# with your package, and you will get complaints that there are
# no rules to generate ltmain.sh.
if test -f "$ltmain"; then
  :
else
  # If there is no Makefile yet, we rely on a make rule to execute
  # `config.status --recheck' to rerun these tests and create the
  # libtool script then.
  test -f Makefile && make "$ltmain"
fi

if test -f "$ltmain"; then
  trap "$rm \"${ofile}T\"; exit 1" 1 2 15
  $rm -f "${ofile}T"

  echo creating $ofile

  # Now quote all the things that may contain metacharacters while being
  # careful not to overquote the AC_SUBSTed values.  We take copies of the
  # variables and quote the copies for generation of the libtool script.
  for var in echo old_CC old_CFLAGS \
    AR AR_FLAGS CC LD LN_S NM SHELL \
    reload_flag reload_cmds wl \
    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
    library_names_spec soname_spec \
    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
    postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
    old_striplib striplib file_magic_cmd export_symbols_cmds \
    deplibs_check_method allow_undefined_flag no_undefined_flag \
    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
    hardcode_libdir_flag_spec hardcode_libdir_separator  \
    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do

    case $var in
    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
    old_postinstall_cmds | old_postuninstall_cmds | \
    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
    extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
    postinstall_cmds | postuninstall_cmds | \
    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
      # Double-quote double-evaled strings.
      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
      ;;
    *)
      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
      ;;
    esac
  done

  cat <<__EOF__ > "${ofile}T"
#! $SHELL

# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996-2000 Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="sed -e s/^X//"

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi

# ### BEGIN LIBTOOL CONFIG

# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:

# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL

# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$need_lc

# Whether or not to build static libraries.
build_old_libs=$enable_static

# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install

# The host system.
host_alias=$host_alias
host=$host

# An echo program that does not interpret backslashes.
echo=$lt_echo

# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS

# The default C compiler.
CC=$lt_CC

# Is the compiler the GNU C compiler?
with_gcc=$GCC

# The linker used to build libraries.
LD=$lt_LD

# Whether we need hard or soft links.
LN_S=$lt_LN_S

# A BSD-compatible nm program.
NM=$lt_NM

# A symbol stripping program
STRIP=$STRIP

# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD

# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"

# Used on cygwin: object dumper.
OBJDUMP="$OBJDUMP"

# Used on cygwin: assembler.
AS="$AS"

# The name of the directory that contains temporary libtool files.
objdir=$objdir

# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds

# How to pass a linker flag through the compiler.
wl=$lt_wl

# Object file suffix (normally "o").
objext="$ac_objext"

# Old archive suffix (normally "a").
libext="$libext"

# Executable file suffix (normally "").
exeext="$exeext"

# Additional compiler flags for building library objects.
pic_flag=$lt_pic_flag
pic_mode=$pic_mode

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_compiler_c_o

# Can we write directly to a .lo ?
compiler_o_lo=$lt_compiler_o_lo

# Must we lock files when doing compilation ?
need_locks=$lt_need_locks

# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix

# Do we need a version for libraries?
need_version=$need_version

# Whether dlopen is supported.
dlopen_support=$enable_dlopen

# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_link_static_flag

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_no_builtin_flag

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec

# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$lt_thread_safe_flag_spec

# Library versioning type.
version_type=$version_type

# Format of library name prefix.
libname_spec=$lt_libname_spec

# List of archive names.  First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec=$lt_library_names_spec

# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec

# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
old_archive_cmds=$lt_old_archive_cmds
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds

# Commands used to build and install a shared archive.
archive_cmds=$lt_archive_cmds
archive_expsym_cmds=$lt_archive_expsym_cmds
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds

# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib

# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method

# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag

# Flag that forces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag

# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds

# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$lt_finish_eval

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_global_symbol_pipe

# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$lt_global_symbol_to_cdecl

# This is the shared library runtime path variable.
runpath_var=$runpath_var

# This is the shared library path variable.
shlibpath_var=$shlibpath_var

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action

# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec

# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator

# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct

# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L

# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var

# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs

# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec

# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec

# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$fix_srcfile_path"

# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds

# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms

# ### END LIBTOOL CONFIG

__EOF__

  case $host_os in
  aix3*)
    cat <<\EOF >> "${ofile}T"

# AIX sometimes has problems with the GCC collect2 program.  For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
  COLLECT_NAMES=
  export COLLECT_NAMES
fi
EOF
    ;;
  esac

  case $host_os in
  cygwin* | mingw* | pw32* | os2*)
    cat <<'EOF' >> "${ofile}T"
      # This is a source program that is used to create dlls on Windows
      # Don't remove nor modify the starting and closing comments
# /* ltdll.c starts here */
# #define WIN32_LEAN_AND_MEAN
# #include <windows.h>
# #undef WIN32_LEAN_AND_MEAN
# #include <stdio.h>
#
# #ifndef __CYGWIN__
# #  ifdef __CYGWIN32__
# #    define __CYGWIN__ __CYGWIN32__
# #  endif
# #endif
#
# #ifdef __cplusplus
# extern "C" {
# #endif
# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
# #ifdef __cplusplus
# }
# #endif
#
# #ifdef __CYGWIN__
# #include <cygwin/cygwin_dll.h>
# DECLARE_CYGWIN_DLL( DllMain );
# #endif
# HINSTANCE __hDllInstance_base;
#
# BOOL APIENTRY
# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
# {
#   __hDllInstance_base = hInst;
#   return TRUE;
# }
# /* ltdll.c ends here */
        # This is a source program that is used to create import libraries
        # on Windows for dlls which lack them. Don't remove nor modify the
        # starting and closing comments
# /* impgen.c starts here */
# /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
#
#  This file is part of GNU libtool.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software
#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#  */
#
# #include <stdio.h>		/* for printf() */
# #include <unistd.h>		/* for open(), lseek(), read() */
# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
# #include <string.h>		/* for strdup() */
#
# /* O_BINARY isn't required (or even defined sometimes) under Unix */
# #ifndef O_BINARY
# #define O_BINARY 0
# #endif
#
# static unsigned int
# pe_get16 (fd, offset)
#      int fd;
#      int offset;
# {
#   unsigned char b[2];
#   lseek (fd, offset, SEEK_SET);
#   read (fd, b, 2);
#   return b[0] + (b[1]<<8);
# }
#
# static unsigned int
# pe_get32 (fd, offset)
#     int fd;
#     int offset;
# {
#   unsigned char b[4];
#   lseek (fd, offset, SEEK_SET);
#   read (fd, b, 4);
#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
# }
#
# static unsigned int
# pe_as32 (ptr)
#      void *ptr;
# {
#   unsigned char *b = ptr;
#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
# }
#
# int
# main (argc, argv)
#     int argc;
#     char *argv[];
# {
#     int dll;
#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
#     unsigned long export_rva, export_size, nsections, secptr, expptr;
#     unsigned long name_rvas, nexp;
#     unsigned char *expdata, *erva;
#     char *filename, *dll_name;
#
#     filename = argv[1];
#
#     dll = open(filename, O_RDONLY|O_BINARY);
#     if (dll < 1)
# 	return 1;
#
#     dll_name = filename;
#
#     for (i=0; filename[i]; i++)
# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
# 	    dll_name = filename + i +1;
#
#     pe_header_offset = pe_get32 (dll, 0x3c);
#     opthdr_ofs = pe_header_offset + 4 + 20;
#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
#
#     if (num_entries < 1) /* no exports */
# 	return 1;
#
#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
#     export_size = pe_get32 (dll, opthdr_ofs + 100);
#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
#     secptr = (pe_header_offset + 4 + 20 +
# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
#
#     expptr = 0;
#     for (i = 0; i < nsections; i++)
#     {
# 	char sname[8];
# 	unsigned long secptr1 = secptr + 40 * i;
# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
# 	lseek(dll, secptr1, SEEK_SET);
# 	read(dll, sname, 8);
# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
# 	{
# 	    expptr = fptr + (export_rva - vaddr);
# 	    if (export_rva + export_size > vaddr + vsize)
# 		export_size = vsize - (export_rva - vaddr);
# 	    break;
# 	}
#     }
#
#     expdata = (unsigned char*)malloc(export_size);
#     lseek (dll, expptr, SEEK_SET);
#     read (dll, expdata, export_size);
#     erva = expdata - export_rva;
#
#     nexp = pe_as32 (expdata+24);
#     name_rvas = pe_as32 (expdata+32);
#
#     printf ("EXPORTS\n");
#     for (i = 0; i<nexp; i++)
#     {
# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
#     }
#
#     return 0;
# }
# /* impgen.c ends here */

EOF
    ;;
  esac

  # We use sed instead of cat because bash on DJGPP gets confused if
  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
  # text mode, it properly converts lines to CR/LF.  This bash problem
  # is reportedly fixed, but why not run on old versions too?
  sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)

  mv -f "${ofile}T" "$ofile" || \
    (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
  chmod +x "$ofile"
fi

# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'

# Prevent multiple expansion

# Extract the first word of "gtkdoc-mkdb", so it can be a program name with args.
set dummy gtkdoc-mkdb; ac_word=$2
echo "$as_me:6752: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_GTKDOC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$GTKDOC"; then
  ac_cv_prog_GTKDOC="$GTKDOC" # Let the user override the test.
else
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  $as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_GTKDOC="true"
echo "$as_me:6767: found $ac_dir/$ac_word" >&5
break
done

  test -z "$ac_cv_prog_GTKDOC" && ac_cv_prog_GTKDOC="false"
fi
fi
GTKDOC=$ac_cv_prog_GTKDOC
if test -n "$GTKDOC"; then
  echo "$as_me:6776: result: $GTKDOC" >&5
echo "${ECHO_T}$GTKDOC" >&6
else
  echo "$as_me:6779: result: no" >&5
echo "${ECHO_T}no" >&6
fi

gtk_doc_min_version=0.6
if $GTKDOC ; then
    gtk_doc_version=`gtkdoc-mkdb --version`
    echo "$as_me:6786: checking gtk-doc version ($gtk_doc_version) >= $gtk_doc_min_version" >&5
echo $ECHO_N "checking gtk-doc version ($gtk_doc_version) >= $gtk_doc_min_version... $ECHO_C" >&6
    if perl <<EOF ; then
	exit (("$gtk_doc_version" =~ /^[0-9]+\.[0-9]+$/) &&
            ("$gtk_doc_version" >= "$gtk_doc_min_version") ? 0 : 1);
EOF
      echo "$as_me:6792: result: yes" >&5
echo "${ECHO_T}yes" >&6
   else
      echo "$as_me:6795: result: no" >&5
echo "${ECHO_T}no" >&6
	GTKDOC=false
   fi
fi

# Check whether --enable-gtk-doc or --disable-gtk-doc was given.
if test "${enable_gtk_doc+set}" = set; then
  enableval="$enable_gtk_doc"
  enable_gtk_doc="$enableval"
else
  enable_gtk_doc=auto
fi;

if test x$enable_gtk_doc = xauto ; then
  if test x$GTKDOC = xtrue ; then
    enable_gtk_doc=yes
  else
    enable_gtk_doc=no
  fi
fi

if test x$enable_gtk_doc = xyes; then
  ENABLE_GTK_DOC_TRUE=
  ENABLE_GTK_DOC_FALSE='#'
else
  ENABLE_GTK_DOC_TRUE='#'
  ENABLE_GTK_DOC_FALSE=
fi

echo "$as_me:6825: checking for X" >&5
echo $ECHO_N "checking for X... $ECHO_C" >&6

# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
  withval="$with_x"

fi;
# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
if test "x$with_x" = xno; then
  # The user explicitly disabled X.
  have_x=disabled
else
  if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
    # Both variables are already set.
    have_x=yes
  else
    if test "${ac_cv_have_x+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  # One or both of the vars are not set, and there is no cached value.
ac_x_includes=no ac_x_libraries=no
rm -fr conftest.dir
if mkdir conftest.dir; then
  cd conftest.dir
  # Make sure to not put "make" in the Imakefile rules, since we grep it out.
  cat >Imakefile <<'EOF'
acfindx:
	@echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
EOF
  if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
    # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
    eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
    # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
    for ac_extension in a so sl; do
      if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
         test -f $ac_im_libdir/libX11.$ac_extension; then
        ac_im_usrlibdir=$ac_im_libdir; break
      fi
    done
    # Screen out bogus values from the imake configuration.  They are
    # bogus both because they are the default anyway, and because
    # using them would break gcc on systems where it needs fixed includes.
    case $ac_im_incroot in
	/usr/include) ;;
	*) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;;
    esac
    case $ac_im_usrlibdir in
	/usr/lib | /lib) ;;
	*) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;;
    esac
  fi
  cd ..
  rm -fr conftest.dir
fi

# Standard set of common directories for X headers.
# Check X11 before X11Rn because it is often a symlink to the current release.
ac_x_header_dirs='
/usr/X11/include
/usr/X11R6/include
/usr/X11R5/include
/usr/X11R4/include

/usr/include/X11
/usr/include/X11R6
/usr/include/X11R5
/usr/include/X11R4

/usr/local/X11/include
/usr/local/X11R6/include
/usr/local/X11R5/include
/usr/local/X11R4/include

/usr/local/include/X11
/usr/local/include/X11R6
/usr/local/include/X11R5
/usr/local/include/X11R4

/usr/X386/include
/usr/x386/include
/usr/XFree86/include/X11

/usr/include
/usr/local/include
/usr/unsupported/include
/usr/athena/include
/usr/local/x11r5/include
/usr/lpp/Xamples/include

/usr/openwin/include
/usr/openwin/share/include'

if test "$ac_x_includes" = no; then
  # Guess where to find include files, by looking for Intrinsic.h.
  # First, try using that file with no special directory specified.
  cat >conftest.$ac_ext <<_ACEOF
#line 6922 "configure"
#include "confdefs.h"
#include <X11/Intrinsic.h>
_ACEOF
if { (eval echo "$as_me:6926: \"$ac_cpp conftest.$ac_ext\"") >&5
  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
  ac_status=$?
  egrep -v '^ *\+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:6932: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null; then
  if test -s conftest.err; then
    ac_cpp_err=$ac_c_preproc_warn_flag
  else
    ac_cpp_err=
  fi
else
  ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
  # We can compile using X headers with no special include directory.
ac_x_includes=
else
  echo "$as_me: failed program was:" >&5
  cat conftest.$ac_ext >&5
  for ac_dir in $ac_x_header_dirs; do
  if test -r "$ac_dir/X11/Intrinsic.h"; then
    ac_x_includes=$ac_dir
    break
  fi
done
fi
rm -f conftest.err conftest.$ac_ext
fi # $ac_x_includes = no

if test "$ac_x_libraries" = no; then
  # Check for the libraries.
  # See if we find them without any special options.
  # Don't add to $LIBS permanently.
  ac_save_LIBS=$LIBS
  LIBS="-lXt $LIBS"
  cat >conftest.$ac_ext <<_ACEOF
#line 6965 "configure"
#include "confdefs.h"
#include <X11/Intrinsic.h>
int
main ()
{
XtMalloc (0)
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:6977: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:6980: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:6983: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:6986: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  LIBS=$ac_save_LIBS
# We can link X programs with no special library path.
ac_x_libraries=
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
LIBS=$ac_save_LIBS
for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
do
  # Don't even attempt the hair of trying to link an X program!
  for ac_extension in a so sl; do
    if test -r $ac_dir/libXt.$ac_extension; then
      ac_x_libraries=$ac_dir
      break 2
    fi
  done
done
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi # $ac_x_libraries = no

if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then
  # Didn't find X anywhere.  Cache the known absence of X.
  ac_cv_have_x="have_x=no"
else
  # Record where we found X for the cache.
  ac_cv_have_x="have_x=yes \
	        ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
fi
fi

  fi
  eval "$ac_cv_have_x"
fi # $with_x != no

if test "$have_x" != yes; then
  echo "$as_me:7024: result: $have_x" >&5
echo "${ECHO_T}$have_x" >&6
  no_x=yes
else
  # If each of the values was on the command line, it overrides each guess.
  test "x$x_includes" = xNONE && x_includes=$ac_x_includes
  test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
  # Update the cache value to reflect the command line values.
  ac_cv_have_x="have_x=yes \
		ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
  echo "$as_me:7034: result: libraries $x_libraries, headers $x_includes" >&5
echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6
fi

if test "$no_x" = yes; then
  # Not all programs may use this symbol, but it does not hurt to define it.

cat >>confdefs.h <<\EOF
#define X_DISPLAY_MISSING 1
EOF

  X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
else
  if test -n "$x_includes"; then
    X_CFLAGS="$X_CFLAGS -I$x_includes"
  fi

  # It would also be nice to do this for all -L options, not just this one.
  if test -n "$x_libraries"; then
    X_LIBS="$X_LIBS -L$x_libraries"
    # For Solaris; some versions of Sun CC require a space after -R and
    # others require no space.  Words are not sufficient . . . .
    case `(uname -sr) 2>/dev/null` in
    "SunOS 5"*)
      echo "$as_me:7058: checking whether -R must be followed by a space" >&5
echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6
      ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries"
      cat >conftest.$ac_ext <<_ACEOF
#line 7062 "configure"
#include "confdefs.h"

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7074: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7077: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7080: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7083: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_R_nospace=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_R_nospace=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
      if test $ac_R_nospace = yes; then
	echo "$as_me:7093: result: no" >&5
echo "${ECHO_T}no" >&6
	X_LIBS="$X_LIBS -R$x_libraries"
      else
	LIBS="$ac_xsave_LIBS -R $x_libraries"
	cat >conftest.$ac_ext <<_ACEOF
#line 7099 "configure"
#include "confdefs.h"

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7111: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7114: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7117: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7120: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_R_space=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_R_space=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
	if test $ac_R_space = yes; then
	  echo "$as_me:7130: result: yes" >&5
echo "${ECHO_T}yes" >&6
	  X_LIBS="$X_LIBS -R $x_libraries"
	else
	  echo "$as_me:7134: result: neither works" >&5
echo "${ECHO_T}neither works" >&6
	fi
      fi
      LIBS=$ac_xsave_LIBS
    esac
  fi

  # Check for system-dependent libraries X programs must link with.
  # Do this before checking for the system-independent R6 libraries
  # (-lICE), since we may need -lsocket or whatever for X linking.

  if test "$ISC" = yes; then
    X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
  else
    # Martyn Johnson says this is needed for Ultrix, if the X
    # libraries were built with DECnet support.  And Karl Berry says
    # the Alpha needs dnet_stub (dnet does not exist).
    ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11"
    cat >conftest.$ac_ext <<_ACEOF
#line 7154 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char XOpenDisplay ();
int
main ()
{
XOpenDisplay ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7173: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7176: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7179: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7182: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  :
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
echo "$as_me:7188: checking for dnet_ntoa in -ldnet" >&5
echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6
if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-ldnet  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 7196 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char dnet_ntoa ();
int
main ()
{
dnet_ntoa ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7215: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7218: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7221: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7224: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_lib_dnet_dnet_ntoa=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_dnet_dnet_ntoa=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:7235: result: $ac_cv_lib_dnet_dnet_ntoa" >&5
echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6
if test $ac_cv_lib_dnet_dnet_ntoa = yes; then
  X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
fi

    if test $ac_cv_lib_dnet_dnet_ntoa = no; then
      echo "$as_me:7242: checking for dnet_ntoa in -ldnet_stub" >&5
echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6
if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-ldnet_stub  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 7250 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char dnet_ntoa ();
int
main ()
{
dnet_ntoa ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7269: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7272: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7275: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7278: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_lib_dnet_stub_dnet_ntoa=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_dnet_stub_dnet_ntoa=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:7289: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5
echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6
if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then
  X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
fi

    fi
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
    LIBS="$ac_xsave_LIBS"

    # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
    # to get the SysV transport functions.
    # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4)
    # needs -lnsl.
    # The nsl library prevents programs from opening the X display
    # on Irix 5.2, according to T.E. Dickey.
    # The functions gethostbyname, getservbyname, and inet_addr are
    # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking.
    echo "$as_me:7308: checking for gethostbyname" >&5
echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6
if test "${ac_cv_func_gethostbyname+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line 7314 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char gethostbyname (); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char gethostbyname ();
char (*f) ();

int
main ()
{
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
choke me
#else
f = gethostbyname;
#endif

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7345: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7348: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7351: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7354: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_func_gethostbyname=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_func_gethostbyname=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:7364: result: $ac_cv_func_gethostbyname" >&5
echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6

    if test $ac_cv_func_gethostbyname = no; then
      echo "$as_me:7368: checking for gethostbyname in -lnsl" >&5
echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6
if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lnsl  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 7376 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char gethostbyname ();
int
main ()
{
gethostbyname ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7395: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7398: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7401: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7404: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_lib_nsl_gethostbyname=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_nsl_gethostbyname=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:7415: result: $ac_cv_lib_nsl_gethostbyname" >&5
echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6
if test $ac_cv_lib_nsl_gethostbyname = yes; then
  X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
fi

      if test $ac_cv_lib_nsl_gethostbyname = no; then
        echo "$as_me:7422: checking for gethostbyname in -lbsd" >&5
echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6
if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lbsd  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 7430 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char gethostbyname ();
int
main ()
{
gethostbyname ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7449: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7452: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7455: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7458: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_lib_bsd_gethostbyname=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_bsd_gethostbyname=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:7469: result: $ac_cv_lib_bsd_gethostbyname" >&5
echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6
if test $ac_cv_lib_bsd_gethostbyname = yes; then
  X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd"
fi

      fi
    fi

    # lieder@skyler.mavd.honeywell.com says without -lsocket,
    # socket/setsockopt and other routines are undefined under SCO ODT
    # 2.0.  But -lsocket is broken on IRIX 5.2 (and is not necessary
    # on later versions), says Simon Leinen: it contains gethostby*
    # variants that don't use the nameserver (or something).  -lsocket
    # must be given before -lnsl if both are needed.  We assume that
    # if connect needs -lnsl, so does gethostbyname.
    echo "$as_me:7485: checking for connect" >&5
echo $ECHO_N "checking for connect... $ECHO_C" >&6
if test "${ac_cv_func_connect+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line 7491 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char connect (); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char connect ();
char (*f) ();

int
main ()
{
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_connect) || defined (__stub___connect)
choke me
#else
f = connect;
#endif

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7522: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7525: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7528: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7531: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_func_connect=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_func_connect=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:7541: result: $ac_cv_func_connect" >&5
echo "${ECHO_T}$ac_cv_func_connect" >&6

    if test $ac_cv_func_connect = no; then
      echo "$as_me:7545: checking for connect in -lsocket" >&5
echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6
if test "${ac_cv_lib_socket_connect+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 7553 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char connect ();
int
main ()
{
connect ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7572: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7575: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7578: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7581: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_lib_socket_connect=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_socket_connect=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:7592: result: $ac_cv_lib_socket_connect" >&5
echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6
if test $ac_cv_lib_socket_connect = yes; then
  X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
fi

    fi

    # Guillermo Gomez says -lposix is necessary on A/UX.
    echo "$as_me:7601: checking for remove" >&5
echo $ECHO_N "checking for remove... $ECHO_C" >&6
if test "${ac_cv_func_remove+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line 7607 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char remove (); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char remove ();
char (*f) ();

int
main ()
{
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_remove) || defined (__stub___remove)
choke me
#else
f = remove;
#endif

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7638: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7641: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7644: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7647: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_func_remove=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_func_remove=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:7657: result: $ac_cv_func_remove" >&5
echo "${ECHO_T}$ac_cv_func_remove" >&6

    if test $ac_cv_func_remove = no; then
      echo "$as_me:7661: checking for remove in -lposix" >&5
echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6
if test "${ac_cv_lib_posix_remove+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lposix  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 7669 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char remove ();
int
main ()
{
remove ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7688: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7691: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7694: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7697: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_lib_posix_remove=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_posix_remove=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:7708: result: $ac_cv_lib_posix_remove" >&5
echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6
if test $ac_cv_lib_posix_remove = yes; then
  X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
fi

    fi

    # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
    echo "$as_me:7717: checking for shmat" >&5
echo $ECHO_N "checking for shmat... $ECHO_C" >&6
if test "${ac_cv_func_shmat+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line 7723 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char shmat (); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char shmat ();
char (*f) ();

int
main ()
{
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_shmat) || defined (__stub___shmat)
choke me
#else
f = shmat;
#endif

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7754: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7757: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7760: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7763: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_func_shmat=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_func_shmat=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:7773: result: $ac_cv_func_shmat" >&5
echo "${ECHO_T}$ac_cv_func_shmat" >&6

    if test $ac_cv_func_shmat = no; then
      echo "$as_me:7777: checking for shmat in -lipc" >&5
echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6
if test "${ac_cv_lib_ipc_shmat+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lipc  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 7785 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char shmat ();
int
main ()
{
shmat ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7804: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7807: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7810: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7813: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_lib_ipc_shmat=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_ipc_shmat=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:7824: result: $ac_cv_lib_ipc_shmat" >&5
echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6
if test $ac_cv_lib_ipc_shmat = yes; then
  X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
fi

    fi
  fi

  # Check for libraries that X11R6 Xt/Xaw programs need.
  ac_save_LDFLAGS=$LDFLAGS
  test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
  # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
  # check for ICE first), but we must link in the order -lSM -lICE or
  # we get undefined symbols.  So assume we have SM if we have ICE.
  # These have to be linked with before -lX11, unlike the other
  # libraries we check for below, so use a different variable.
  # John Interrante, Karl Berry
  echo "$as_me:7842: checking for IceConnectionNumber in -lICE" >&5
echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6
if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 7850 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char IceConnectionNumber ();
int
main ()
{
IceConnectionNumber ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:7869: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:7872: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:7875: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:7878: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_lib_ICE_IceConnectionNumber=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_ICE_IceConnectionNumber=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:7889: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5
echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6
if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then
  X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
fi

  LDFLAGS=$ac_save_LDFLAGS

fi

if test x$no_x = xyes ; then
  { { echo "$as_me:7900: error: X development libraries not found" >&5
echo "$as_me: error: X development libraries not found" >&2;}
   { (exit 1); exit 1; }; }
else
  X_LIBS="$X_LIBS $X_PRE_LIBS -lX11 $X_EXTRA_LIBS"
fi

  succeeded=no

  if test -z "$PKG_CONFIG"; then
    # Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
echo "$as_me:7912: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  case $PKG_CONFIG in
  [\\/]* | ?:[\\/]*)
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
  ;;
  *)
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  if $as_executable_p "$ac_dir/$ac_word"; then
   ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
   echo "$as_me:7929: found $ac_dir/$ac_word" >&5
   break
fi
done

  test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
  ;;
esac
fi
PKG_CONFIG=$ac_cv_path_PKG_CONFIG

if test -n "$PKG_CONFIG"; then
  echo "$as_me:7941: result: $PKG_CONFIG" >&5
echo "${ECHO_T}$PKG_CONFIG" >&6
else
  echo "$as_me:7944: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  fi

  if test "$PKG_CONFIG" = "no" ; then
     echo "*** The pkg-config script could not be found. Make sure it is"
     echo "*** in your path, or set the PKG_CONFIG environment variable"
     echo "*** to the full path to pkg-config."
     echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
  else
     PKG_CONFIG_MIN_VERSION=0.9.0
     if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
        echo "$as_me:7958: checking for \
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 1.3.12 \
	gail >= 0.11" >&5
echo $ECHO_N "checking for \
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 1.3.12 \
	gail >= 0.11... $ECHO_C" >&6

        if $PKG_CONFIG --exists "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 1.3.12 \
	gail >= 0.11" ; then
            echo "$as_me:7974: result: yes" >&5
echo "${ECHO_T}yes" >&6
            succeeded=yes

            echo "$as_me:7978: checking LIBSPI_CFLAGS" >&5
echo $ECHO_N "checking LIBSPI_CFLAGS... $ECHO_C" >&6
            LIBSPI_CFLAGS=`$PKG_CONFIG --cflags "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 1.3.12 \
	gail >= 0.11"`
            echo "$as_me:7985: result: $LIBSPI_CFLAGS" >&5
echo "${ECHO_T}$LIBSPI_CFLAGS" >&6

            echo "$as_me:7988: checking LIBSPI_LIBS" >&5
echo $ECHO_N "checking LIBSPI_LIBS... $ECHO_C" >&6
            LIBSPI_LIBS=`$PKG_CONFIG --libs "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 1.3.12 \
	gail >= 0.11"`
            echo "$as_me:7995: result: $LIBSPI_LIBS" >&5
echo "${ECHO_T}$LIBSPI_LIBS" >&6
        else
            LIBSPI_CFLAGS=""
            LIBSPI_LIBS=""
            ## If we have a custom action on failure, don't print errors, but
            ## do set a variable so people can do so.
            LIBSPI_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 1.3.12 \
	gail >= 0.11"`
            echo $LIBSPI_PKG_ERRORS
        fi

     else
        echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
        echo "*** See http://www.freedesktop.org/software/pkgconfig"
     fi
  fi

  if test $succeeded = yes; then
     :
  else
     { { echo "$as_me:8019: error: Library requirements (\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 1.3.12 \
	gail >= 0.11) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&5
echo "$as_me: error: Library requirements (\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 1.3.12 \
	gail >= 0.11) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&2;}
   { (exit 1); exit 1; }; }
  fi

  succeeded=no

  if test -z "$PKG_CONFIG"; then
    # Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
echo "$as_me:8037: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  case $PKG_CONFIG in
  [\\/]* | ?:[\\/]*)
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
  ;;
  *)
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  if $as_executable_p "$ac_dir/$ac_word"; then
   ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
   echo "$as_me:8054: found $ac_dir/$ac_word" >&5
   break
fi
done

  test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
  ;;
esac
fi
PKG_CONFIG=$ac_cv_path_PKG_CONFIG

if test -n "$PKG_CONFIG"; then
  echo "$as_me:8066: result: $PKG_CONFIG" >&5
echo "${ECHO_T}$PKG_CONFIG" >&6
else
  echo "$as_me:8069: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  fi

  if test "$PKG_CONFIG" = "no" ; then
     echo "*** The pkg-config script could not be found. Make sure it is"
     echo "*** in your path, or set the PKG_CONFIG environment variable"
     echo "*** to the full path to pkg-config."
     echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
  else
     PKG_CONFIG_MIN_VERSION=0.9.0
     if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
        echo "$as_me:8083: checking for \
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 \
	atk >= 0.10" >&5
echo $ECHO_N "checking for \
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 \
	atk >= 0.10... $ECHO_C" >&6

        if $PKG_CONFIG --exists "\
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 \
	atk >= 0.10" ; then
            echo "$as_me:8096: result: yes" >&5
echo "${ECHO_T}yes" >&6
            succeeded=yes

            echo "$as_me:8100: checking REGISTRYD_CFLAGS" >&5
echo $ECHO_N "checking REGISTRYD_CFLAGS... $ECHO_C" >&6
            REGISTRYD_CFLAGS=`$PKG_CONFIG --cflags "\
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 \
	atk >= 0.10"`
            echo "$as_me:8106: result: $REGISTRYD_CFLAGS" >&5
echo "${ECHO_T}$REGISTRYD_CFLAGS" >&6

            echo "$as_me:8109: checking REGISTRYD_LIBS" >&5
echo $ECHO_N "checking REGISTRYD_LIBS... $ECHO_C" >&6
            REGISTRYD_LIBS=`$PKG_CONFIG --libs "\
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 \
	atk >= 0.10"`
            echo "$as_me:8115: result: $REGISTRYD_LIBS" >&5
echo "${ECHO_T}$REGISTRYD_LIBS" >&6
        else
            REGISTRYD_CFLAGS=""
            REGISTRYD_LIBS=""
            ## If we have a custom action on failure, don't print errors, but
            ## do set a variable so people can do so.
            REGISTRYD_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "\
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 \
	atk >= 0.10"`
            echo $REGISTRYD_PKG_ERRORS
        fi

     else
        echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
        echo "*** See http://www.freedesktop.org/software/pkgconfig"
     fi
  fi

  if test $succeeded = yes; then
     :
  else
     { { echo "$as_me:8138: error: Library requirements (\
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 \
	atk >= 0.10) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&5
echo "$as_me: error: Library requirements (\
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 \
	atk >= 0.10) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&2;}
   { (exit 1); exit 1; }; }
  fi

  succeeded=no

  if test -z "$PKG_CONFIG"; then
    # Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
echo "$as_me:8154: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  case $PKG_CONFIG in
  [\\/]* | ?:[\\/]*)
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
  ;;
  *)
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  if $as_executable_p "$ac_dir/$ac_word"; then
   ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
   echo "$as_me:8171: found $ac_dir/$ac_word" >&5
   break
fi
done

  test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
  ;;
esac
fi
PKG_CONFIG=$ac_cv_path_PKG_CONFIG

if test -n "$PKG_CONFIG"; then
  echo "$as_me:8183: result: $PKG_CONFIG" >&5
echo "${ECHO_T}$PKG_CONFIG" >&6
else
  echo "$as_me:8186: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  fi

  if test "$PKG_CONFIG" = "no" ; then
     echo "*** The pkg-config script could not be found. Make sure it is"
     echo "*** in your path, or set the PKG_CONFIG environment variable"
     echo "*** to the full path to pkg-config."
     echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
  else
     PKG_CONFIG_MIN_VERSION=0.9.0
     if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
        echo "$as_me:8200: checking for \
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 2.0.0 \
	gail >= 0.11" >&5
echo $ECHO_N "checking for \
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 2.0.0 \
	gail >= 0.11... $ECHO_C" >&6

        if $PKG_CONFIG --exists "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 2.0.0 \
	gail >= 0.11" ; then
            echo "$as_me:8216: result: yes" >&5
echo "${ECHO_T}yes" >&6
            succeeded=yes

            echo "$as_me:8220: checking TESTS_CFLAGS" >&5
echo $ECHO_N "checking TESTS_CFLAGS... $ECHO_C" >&6
            TESTS_CFLAGS=`$PKG_CONFIG --cflags "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 2.0.0 \
	gail >= 0.11"`
            echo "$as_me:8227: result: $TESTS_CFLAGS" >&5
echo "${ECHO_T}$TESTS_CFLAGS" >&6

            echo "$as_me:8230: checking TESTS_LIBS" >&5
echo $ECHO_N "checking TESTS_LIBS... $ECHO_C" >&6
            TESTS_LIBS=`$PKG_CONFIG --libs "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 2.0.0 \
	gail >= 0.11"`
            echo "$as_me:8237: result: $TESTS_LIBS" >&5
echo "${ECHO_T}$TESTS_LIBS" >&6
        else
            TESTS_CFLAGS=""
            TESTS_LIBS=""
            ## If we have a custom action on failure, don't print errors, but
            ## do set a variable so people can do so.
            TESTS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 2.0.0 \
	gail >= 0.11"`
            echo $TESTS_PKG_ERRORS
        fi

     else
        echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
        echo "*** See http://www.freedesktop.org/software/pkgconfig"
     fi
  fi

  if test $succeeded = yes; then
     :
  else
     { { echo "$as_me:8261: error: Library requirements (\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 2.0.0 \
	gail >= 0.11) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&5
echo "$as_me: error: Library requirements (\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10 \
	gtk+-2.0 >= 2.0.0 \
	gail >= 0.11) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&2;}
   { (exit 1); exit 1; }; }
  fi

  succeeded=no

  if test -z "$PKG_CONFIG"; then
    # Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
echo "$as_me:8279: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  case $PKG_CONFIG in
  [\\/]* | ?:[\\/]*)
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
  ;;
  *)
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  if $as_executable_p "$ac_dir/$ac_word"; then
   ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
   echo "$as_me:8296: found $ac_dir/$ac_word" >&5
   break
fi
done

  test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
  ;;
esac
fi
PKG_CONFIG=$ac_cv_path_PKG_CONFIG

if test -n "$PKG_CONFIG"; then
  echo "$as_me:8308: result: $PKG_CONFIG" >&5
echo "${ECHO_T}$PKG_CONFIG" >&6
else
  echo "$as_me:8311: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  fi

  if test "$PKG_CONFIG" = "no" ; then
     echo "*** The pkg-config script could not be found. Make sure it is"
     echo "*** in your path, or set the PKG_CONFIG environment variable"
     echo "*** to the full path to pkg-config."
     echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
  else
     PKG_CONFIG_MIN_VERSION=0.9.0
     if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
        echo "$as_me:8325: checking for \
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 >= 2.0.0 \
	gdk-pixbuf-2.0 >= 2.0.0
	gdk-pixbuf-xlib-2.0 >= 2.0.0" >&5
echo $ECHO_N "checking for \
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 >= 2.0.0 \
	gdk-pixbuf-2.0 >= 2.0.0
	gdk-pixbuf-xlib-2.0 >= 2.0.0... $ECHO_C" >&6

        if $PKG_CONFIG --exists "\
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 >= 2.0.0 \
	gdk-pixbuf-2.0 >= 2.0.0
	gdk-pixbuf-xlib-2.0 >= 2.0.0" ; then
            echo "$as_me:8341: result: yes" >&5
echo "${ECHO_T}yes" >&6
            succeeded=yes

            echo "$as_me:8345: checking UTILS_CFLAGS" >&5
echo $ECHO_N "checking UTILS_CFLAGS... $ECHO_C" >&6
            UTILS_CFLAGS=`$PKG_CONFIG --cflags "\
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 >= 2.0.0 \
	gdk-pixbuf-2.0 >= 2.0.0
	gdk-pixbuf-xlib-2.0 >= 2.0.0"`
            echo "$as_me:8352: result: $UTILS_CFLAGS" >&5
echo "${ECHO_T}$UTILS_CFLAGS" >&6

            echo "$as_me:8355: checking UTILS_LIBS" >&5
echo $ECHO_N "checking UTILS_LIBS... $ECHO_C" >&6
            UTILS_LIBS=`$PKG_CONFIG --libs "\
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 >= 2.0.0 \
	gdk-pixbuf-2.0 >= 2.0.0
	gdk-pixbuf-xlib-2.0 >= 2.0.0"`
            echo "$as_me:8362: result: $UTILS_LIBS" >&5
echo "${ECHO_T}$UTILS_LIBS" >&6
        else
            UTILS_CFLAGS=""
            UTILS_LIBS=""
            ## If we have a custom action on failure, don't print errors, but
            ## do set a variable so people can do so.
            UTILS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "\
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 >= 2.0.0 \
	gdk-pixbuf-2.0 >= 2.0.0
	gdk-pixbuf-xlib-2.0 >= 2.0.0"`
            echo $UTILS_PKG_ERRORS
        fi

     else
        echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
        echo "*** See http://www.freedesktop.org/software/pkgconfig"
     fi
  fi

  if test $succeeded = yes; then
     :
  else
     { { echo "$as_me:8386: error: Library requirements (\
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 >= 2.0.0 \
	gdk-pixbuf-2.0 >= 2.0.0
	gdk-pixbuf-xlib-2.0 >= 2.0.0) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&5
echo "$as_me: error: Library requirements (\
	libbonobo-2.0 >= 1.107.0 \
	gtk+-2.0 >= 2.0.0 \
	gdk-pixbuf-2.0 >= 2.0.0
	gdk-pixbuf-xlib-2.0 >= 2.0.0) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&2;}
   { (exit 1); exit 1; }; }
  fi

  succeeded=no

  if test -z "$PKG_CONFIG"; then
    # Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
echo "$as_me:8404: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  case $PKG_CONFIG in
  [\\/]* | ?:[\\/]*)
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
  ;;
  *)
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  if $as_executable_p "$ac_dir/$ac_word"; then
   ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
   echo "$as_me:8421: found $ac_dir/$ac_word" >&5
   break
fi
done

  test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
  ;;
esac
fi
PKG_CONFIG=$ac_cv_path_PKG_CONFIG

if test -n "$PKG_CONFIG"; then
  echo "$as_me:8433: result: $PKG_CONFIG" >&5
echo "${ECHO_T}$PKG_CONFIG" >&6
else
  echo "$as_me:8436: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  fi

  if test "$PKG_CONFIG" = "no" ; then
     echo "*** The pkg-config script could not be found. Make sure it is"
     echo "*** in your path, or set the PKG_CONFIG environment variable"
     echo "*** to the full path to pkg-config."
     echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
  else
     PKG_CONFIG_MIN_VERSION=0.9.0
     if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
        echo "$as_me:8450: checking for \
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10" >&5
echo $ECHO_N "checking for \
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10... $ECHO_C" >&6

        if $PKG_CONFIG --exists "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10" ; then
            echo "$as_me:8460: result: yes" >&5
echo "${ECHO_T}yes" >&6
            succeeded=yes

            echo "$as_me:8464: checking ATK_BRIDGE_CFLAGS" >&5
echo $ECHO_N "checking ATK_BRIDGE_CFLAGS... $ECHO_C" >&6
            ATK_BRIDGE_CFLAGS=`$PKG_CONFIG --cflags "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10"`
            echo "$as_me:8469: result: $ATK_BRIDGE_CFLAGS" >&5
echo "${ECHO_T}$ATK_BRIDGE_CFLAGS" >&6

            echo "$as_me:8472: checking ATK_BRIDGE_LIBS" >&5
echo $ECHO_N "checking ATK_BRIDGE_LIBS... $ECHO_C" >&6
            ATK_BRIDGE_LIBS=`$PKG_CONFIG --libs "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10"`
            echo "$as_me:8477: result: $ATK_BRIDGE_LIBS" >&5
echo "${ECHO_T}$ATK_BRIDGE_LIBS" >&6
        else
            ATK_BRIDGE_CFLAGS=""
            ATK_BRIDGE_LIBS=""
            ## If we have a custom action on failure, don't print errors, but
            ## do set a variable so people can do so.
            ATK_BRIDGE_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10"`
            echo $ATK_BRIDGE_PKG_ERRORS
        fi

     else
        echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
        echo "*** See http://www.freedesktop.org/software/pkgconfig"
     fi
  fi

  if test $succeeded = yes; then
     :
  else
     { { echo "$as_me:8499: error: Library requirements (\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&5
echo "$as_me: error: Library requirements (\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 0.10) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&2;}
   { (exit 1); exit 1; }; }
  fi

  succeeded=no

  if test -z "$PKG_CONFIG"; then
    # Extract the first word of "pkg-config", so it can be a program name with args.
set dummy pkg-config; ac_word=$2
echo "$as_me:8513: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  case $PKG_CONFIG in
  [\\/]* | ?:[\\/]*)
  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
  ;;
  *)
  ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
  IFS=$ac_save_IFS
  test -z "$ac_dir" && ac_dir=.
  if $as_executable_p "$ac_dir/$ac_word"; then
   ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
   echo "$as_me:8530: found $ac_dir/$ac_word" >&5
   break
fi
done

  test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
  ;;
esac
fi
PKG_CONFIG=$ac_cv_path_PKG_CONFIG

if test -n "$PKG_CONFIG"; then
  echo "$as_me:8542: result: $PKG_CONFIG" >&5
echo "${ECHO_T}$PKG_CONFIG" >&6
else
  echo "$as_me:8545: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  fi

  if test "$PKG_CONFIG" = "no" ; then
     echo "*** The pkg-config script could not be found. Make sure it is"
     echo "*** in your path, or set the PKG_CONFIG environment variable"
     echo "*** to the full path to pkg-config."
     echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
  else
     PKG_CONFIG_MIN_VERSION=0.9.0
     if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
        echo "$as_me:8559: checking for \
	libbonobo-2.0 >= 1.107.0 \
	atk >= 1.0.0" >&5
echo $ECHO_N "checking for \
	libbonobo-2.0 >= 1.107.0 \
	atk >= 1.0.0... $ECHO_C" >&6

        if $PKG_CONFIG --exists "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 1.0.0" ; then
            echo "$as_me:8569: result: yes" >&5
echo "${ECHO_T}yes" >&6
            succeeded=yes

            echo "$as_me:8573: checking LIBCSPI_CFLAGS" >&5
echo $ECHO_N "checking LIBCSPI_CFLAGS... $ECHO_C" >&6
            LIBCSPI_CFLAGS=`$PKG_CONFIG --cflags "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 1.0.0"`
            echo "$as_me:8578: result: $LIBCSPI_CFLAGS" >&5
echo "${ECHO_T}$LIBCSPI_CFLAGS" >&6

            echo "$as_me:8581: checking LIBCSPI_LIBS" >&5
echo $ECHO_N "checking LIBCSPI_LIBS... $ECHO_C" >&6
            LIBCSPI_LIBS=`$PKG_CONFIG --libs "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 1.0.0"`
            echo "$as_me:8586: result: $LIBCSPI_LIBS" >&5
echo "${ECHO_T}$LIBCSPI_LIBS" >&6
        else
            LIBCSPI_CFLAGS=""
            LIBCSPI_LIBS=""
            ## If we have a custom action on failure, don't print errors, but
            ## do set a variable so people can do so.
            LIBCSPI_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 1.0.0"`
            echo $LIBCSPI_PKG_ERRORS
        fi

     else
        echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
        echo "*** See http://www.freedesktop.org/software/pkgconfig"
     fi
  fi

  if test $succeeded = yes; then
     :
  else
     { { echo "$as_me:8608: error: Library requirements (\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 1.0.0) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&5
echo "$as_me: error: Library requirements (\
	libbonobo-2.0 >= 1.107.0 \
	atk >= 1.0.0) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them." >&2;}
   { (exit 1); exit 1; }; }
  fi

ORBIT_IDL="`$PKG_CONFIG --variable=orbit_idl ORBit-2.0`"

BONOBO_ACTIVATION_IDL_DIR="`$PKG_CONFIG --variable=idldir bonobo-activation-2.0`"
LIBBONOBO_IDL_DIR="`$PKG_CONFIG --variable=idldir libbonobo-2.0`"

echo "$as_me:8622: checking for XTestFakeKeyEvent in -lXtst" >&5
echo $ECHO_N "checking for XTestFakeKeyEvent in -lXtst... $ECHO_C" >&6
if test "${ac_cv_lib_Xtst_XTestFakeKeyEvent+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lXtst  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 8630 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char XTestFakeKeyEvent ();
int
main ()
{
XTestFakeKeyEvent ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:8649: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:8652: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:8655: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:8658: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_lib_Xtst_XTestFakeKeyEvent=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_Xtst_XTestFakeKeyEvent=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:8669: result: $ac_cv_lib_Xtst_XTestFakeKeyEvent" >&5
echo "${ECHO_T}$ac_cv_lib_Xtst_XTestFakeKeyEvent" >&6
if test $ac_cv_lib_Xtst_XTestFakeKeyEvent = yes; then
  XTST_LIBS=-lXtst
fi

if test "x$XTST_LIBS" = x; then
  save_LIBS="$LIBS"
  for xtstpath in /usr/X11R6/lib /usr/openwin/lib; do
    LIBS="-L$xtstpath -lXtst"
    echo "$as_me:8679: checking for -lXtst in $xtstpath" >&5
echo $ECHO_N "checking for -lXtst in $xtstpath... $ECHO_C" >&6
    cat >conftest.$ac_ext <<_ACEOF
#line 8682 "configure"
#include "confdefs.h"

int
main ()
{
XTestFakeKeyEvent()
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:8694: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:8697: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:8700: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:8703: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then

	echo "$as_me:8706: result: yes" >&5
echo "${ECHO_T}yes" >&6
	XTST_LIBS="-L$xtstpath -lXtst"
        LIBS="$save_LIBS"
	break
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
echo "$as_me:8714: result: no" >&5
echo "${ECHO_T}no" >&6
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
  done
  if test "x$XTST_LIBS" = x; then
    { { echo "$as_me:8720: error: Couldn't find the Xtst library. Check config.log for details" >&5
echo "$as_me: error: Couldn't find the Xtst library. Check config.log for details" >&2;}
   { (exit 1); exit 1; }; }
  fi
fi

echo "$as_me:8726: checking for poptGetContext in -lpopt" >&5
echo $ECHO_N "checking for poptGetContext in -lpopt... $ECHO_C" >&6
if test "${ac_cv_lib_popt_poptGetContext+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  ac_check_lib_save_LIBS=$LIBS
LIBS="-lpopt  $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 8734 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char poptGetContext ();
int
main ()
{
poptGetContext ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:8753: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:8756: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:8759: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:8762: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_lib_popt_poptGetContext=yes
else
  echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_popt_poptGetContext=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:8773: result: $ac_cv_lib_popt_poptGetContext" >&5
echo "${ECHO_T}$ac_cv_lib_popt_poptGetContext" >&6
if test $ac_cv_lib_popt_poptGetContext = yes; then
  POPT_LIBS="-lpopt"
else
  { { echo "$as_me:8778: error: popt is required to build at-spi.
You can download the latest version from ftp://ftp.rpm.org/pub/rpm/dist/rpm-4.0.x/" >&5
echo "$as_me: error: popt is required to build at-spi.
You can download the latest version from ftp://ftp.rpm.org/pub/rpm/dist/rpm-4.0.x/" >&2;}
   { (exit 1); exit 1; }; }
fi

echo "$as_me:8785: checking for POPT_ARG_FLOAT in popt.h" >&5
echo $ECHO_N "checking for POPT_ARG_FLOAT in popt.h... $ECHO_C" >&6
cat >conftest.$ac_ext <<_ACEOF
#line 8788 "configure"
#include "confdefs.h"
#include <popt.h>
#ifndef POPT_ARG_FLOAT
#error popt too old
#endif
_ACEOF
if { (eval echo "$as_me:8795: \"$ac_cpp conftest.$ac_ext\"") >&5
  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
  ac_status=$?
  egrep -v '^ *\+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:8801: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null; then
  if test -s conftest.err; then
    ac_cpp_err=$ac_c_preproc_warn_flag
  else
    ac_cpp_err=
  fi
else
  ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
  echo "$as_me:8812: result: yes" >&5
echo "${ECHO_T}yes" >&6
else
  echo "$as_me: failed program was:" >&5
  cat conftest.$ac_ext >&5

  echo "$as_me:8818: result: no" >&5
echo "${ECHO_T}no" >&6
  { { echo "$as_me:8820: error: A newer version of popt is required to build at-spi.
You can download the latest version from ftp://ftp.rpm.org/pub/rpm/dist/rpm-4.0.x/" >&5
echo "$as_me: error: A newer version of popt is required to build at-spi.
You can download the latest version from ftp://ftp.rpm.org/pub/rpm/dist/rpm-4.0.x/" >&2;}
   { (exit 1); exit 1; }; }

fi
rm -f conftest.err conftest.$ac_ext

ac_config_files="$ac_config_files Makefile libspi-1.0.pc cspi-1.0.pc docs/Makefile docs/reference/Makefile docs/reference/cspi/Makefile idl/Makefile libspi/Makefile registryd/Makefile registryd/Accessibility_Registry.server atk-bridge/Makefile test/Makefile cspi/Makefile cspi/bonobo/Makefile util/Makefile util/Accessibility_Util.server"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems.  If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overriden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.

_ACEOF

# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
{
  (set) 2>&1 |
    case `(ac_space=' '; set | grep ac_space) 2>&1` in
    *ac_space=\ *)
      # `set' does not quote correctly, so add quotes (double-quote
      # substitution turns \\\\ into \\, and sed turns \\ into \).
      sed -n \
        "s/'/'\\\\''/g;
    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
      ;;
    *)
      # `set' quotes correctly as required by POSIX, so do not add quotes.
      sed -n \
        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
      ;;
    esac;
} |
  sed '
     t clear
     : clear
     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
     t end
     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
     : end' >>confcache
if cmp -s $cache_file confcache; then :; else
  if test -w $cache_file; then
    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
    cat confcache >$cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# VPATH may cause trouble with some makes, so we remove $(srcdir),
# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=/{
s/:*\$(srcdir):*/:/;
s/:*\${srcdir}:*/:/;
s/:*@srcdir@:*/:/;
s/^\([^=]*=[ 	]*\):*/\1/;
s/:*$//;
s/^[^=]*=[ 	]*$//;
}'
fi

DEFS=-DHAVE_CONFIG_H

        mv -f po/POTFILES po/POTFILES.tmp
        sed -e 's/\[.*\] *//' < po/POTFILES.tmp > po/POTFILES
        rm -f po/POTFILES.tmp

: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ echo "$as_me:8913: creating $CONFIG_STATUS" >&5
echo "$as_me: creating $CONFIG_STATUS" >&6;}
cat >$CONFIG_STATUS <<_ACEOF
#! $SHELL
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.

debug=false
SHELL=\${CONFIG_SHELL-$SHELL}
ac_cs_invocation="\$0 \$@"

_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
  set -o posix
fi

# Name of the executable.
as_me=`echo "$0" |sed 's,.*[\\/],,'`

if expr a : '\(a\)' >/dev/null 2>&1; then
  as_expr=expr
else
  as_expr=false
fi

rm -f conf$$ conf$$.exe conf$$.file
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
  # We could just check for DJGPP; but this test a) works b) is more generic
  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
  if test -f conf$$.exe; then
    # Don't use ln at all; we don't have any links
    as_ln_s='cp -p'
  else
    as_ln_s='ln -s'
  fi
elif ln conf$$.file conf$$ 2>/dev/null; then
  as_ln_s=ln
else
  as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.file

as_executable_p="test -f"

# Support unset when possible.
if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
  as_unset=unset
else
  as_unset=false
fi

# NLS nuisances.
$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; }
$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; }
$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; }
$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; }
$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; }
$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; }
$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; }
$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; }

# IFS
# We need space, tab and new line, in precisely that order.
as_nl='
'
IFS=" 	$as_nl"

# CDPATH.
$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; }

exec 6>&1

_ACEOF

# Files that config.status was made for.
if test -n "$ac_config_files"; then
  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
fi

if test -n "$ac_config_headers"; then
  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
fi

if test -n "$ac_config_links"; then
  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
fi

if test -n "$ac_config_commands"; then
  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
fi

cat >>$CONFIG_STATUS <<\EOF

ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.

Usage: $0 [OPTIONS] [FILE]...

  -h, --help       print this help, then exit
  -V, --version    print version number, then exit
  -d, --debug      don't remove temporary files
      --recheck    update $as_me by reconfiguring in the same conditions
  --file=FILE[:TEMPLATE]
                   instantiate the configuration file FILE
  --header=FILE[:TEMPLATE]
                   instantiate the configuration header FILE

Configuration files:
$config_files

Configuration headers:
$config_headers

Configuration commands:
$config_commands

Report bugs to <bug-autoconf@gnu.org>."
EOF

cat >>$CONFIG_STATUS <<EOF
ac_cs_version="\\
config.status
configured by $0, generated by GNU Autoconf 2.52,
  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"

Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
srcdir=$srcdir
INSTALL="$INSTALL"
EOF

cat >>$CONFIG_STATUS <<\EOF
# If no file are specified by the user, then we need to provide default
# value.  By we need to know if files were specified by the user.
ac_need_defaults=:
while test $# != 0
do
  case $1 in
  --*=*)
    ac_option=`expr "x$1" : 'x\([^=]*\)='`
    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
    shift
    set dummy "$ac_option" "$ac_optarg" ${1+"$@"}
    shift
    ;;
  -*);;
  *) # This is not an option, so the user has probably given explicit
     # arguments.
     ac_need_defaults=false;;
  esac

  case $1 in
  # Handling of the options.
EOF
cat >>$CONFIG_STATUS <<EOF
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion"
    exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;;
EOF
cat >>$CONFIG_STATUS <<\EOF
  --version | --vers* | -V )
    echo "$ac_cs_version"; exit 0 ;;
  --he | --h)
    # Conflict between --help and --header
    { { echo "$as_me:9089: error: ambiguous option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2;}
   { (exit 1); exit 1; }; };;
  --help | --hel | -h )
    echo "$ac_cs_usage"; exit 0 ;;
  --debug | --d* | -d )
    debug=: ;;
  --file | --fil | --fi | --f )
    shift
    CONFIG_FILES="$CONFIG_FILES $1"
    ac_need_defaults=false;;
  --header | --heade | --head | --hea )
    shift
    CONFIG_HEADERS="$CONFIG_HEADERS $1"
    ac_need_defaults=false;;

  # This is an error.
  -*) { { echo "$as_me:9108: error: unrecognized option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2;}
   { (exit 1); exit 1; }; } ;;

  *) ac_config_targets="$ac_config_targets $1" ;;

  esac
  shift
done

exec 5>>config.log
cat >&5 << _ACEOF

## ----------------------- ##
## Running config.status.  ##
## ----------------------- ##

This file was extended by $as_me 2.52, executed with
  CONFIG_FILES    = $CONFIG_FILES
  CONFIG_HEADERS  = $CONFIG_HEADERS
  CONFIG_LINKS    = $CONFIG_LINKS
  CONFIG_COMMANDS = $CONFIG_COMMANDS
  > $ac_cs_invocation
on `(hostname || uname -n) 2>/dev/null | sed 1q`

_ACEOF
EOF

cat >>$CONFIG_STATUS <<EOF
#
# INIT-COMMANDS section.
#

INTLTOOL_PERL=${INTLTOOL_PERL}

EOF

cat >>$CONFIG_STATUS <<\EOF
for ac_config_target in $ac_config_targets
do
  case "$ac_config_target" in
  # Handling of arguments.
  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
  "libspi-1.0.pc" ) CONFIG_FILES="$CONFIG_FILES libspi-1.0.pc" ;;
  "cspi-1.0.pc" ) CONFIG_FILES="$CONFIG_FILES cspi-1.0.pc" ;;
  "docs/Makefile" ) CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;;
  "docs/reference/Makefile" ) CONFIG_FILES="$CONFIG_FILES docs/reference/Makefile" ;;
  "docs/reference/cspi/Makefile" ) CONFIG_FILES="$CONFIG_FILES docs/reference/cspi/Makefile" ;;
  "idl/Makefile" ) CONFIG_FILES="$CONFIG_FILES idl/Makefile" ;;
  "libspi/Makefile" ) CONFIG_FILES="$CONFIG_FILES libspi/Makefile" ;;
  "registryd/Makefile" ) CONFIG_FILES="$CONFIG_FILES registryd/Makefile" ;;
  "registryd/Accessibility_Registry.server" ) CONFIG_FILES="$CONFIG_FILES registryd/Accessibility_Registry.server" ;;
  "atk-bridge/Makefile" ) CONFIG_FILES="$CONFIG_FILES atk-bridge/Makefile" ;;
  "test/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/Makefile" ;;
  "cspi/Makefile" ) CONFIG_FILES="$CONFIG_FILES cspi/Makefile" ;;
  "cspi/bonobo/Makefile" ) CONFIG_FILES="$CONFIG_FILES cspi/bonobo/Makefile" ;;
  "util/Makefile" ) CONFIG_FILES="$CONFIG_FILES util/Makefile" ;;
  "util/Accessibility_Util.server" ) CONFIG_FILES="$CONFIG_FILES util/Accessibility_Util.server" ;;
  "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
  "default-2" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-2" ;;
  "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
  *) { { echo "$as_me:9171: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
   { (exit 1); exit 1; }; };;
  esac
done

# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used.  Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi

# Create a temporary directory, and hook for its removal unless debugging.
$debug ||
{
  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
  trap '{ (exit 1); exit 1; }' 1 2 13 15
}

# Create a (secure) tmp directory for tmp files.
: ${TMPDIR=/tmp}
{
  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` &&
  test -n "$tmp" && test -d "$tmp"
}  ||
{
  tmp=$TMPDIR/cs$$-$RANDOM
  (umask 077 && mkdir $tmp)
} ||
{
   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
   { (exit 1); exit 1; }
}

EOF

cat >>$CONFIG_STATUS <<EOF

#
# CONFIG_FILES section.
#

# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
if test -n "\$CONFIG_FILES"; then
  # Protect against being on the right side of a sed subst in config.status.
  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
s,@SHELL@,$SHELL,;t t
s,@exec_prefix@,$exec_prefix,;t t
s,@prefix@,$prefix,;t t
s,@program_transform_name@,$program_transform_name,;t t
s,@bindir@,$bindir,;t t
s,@sbindir@,$sbindir,;t t
s,@libexecdir@,$libexecdir,;t t
s,@datadir@,$datadir,;t t
s,@sysconfdir@,$sysconfdir,;t t
s,@sharedstatedir@,$sharedstatedir,;t t
s,@localstatedir@,$localstatedir,;t t
s,@libdir@,$libdir,;t t
s,@includedir@,$includedir,;t t
s,@oldincludedir@,$oldincludedir,;t t
s,@infodir@,$infodir,;t t
s,@mandir@,$mandir,;t t
s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
s,@build_alias@,$build_alias,;t t
s,@host_alias@,$host_alias,;t t
s,@target_alias@,$target_alias,;t t
s,@ECHO_C@,$ECHO_C,;t t
s,@ECHO_N@,$ECHO_N,;t t
s,@ECHO_T@,$ECHO_T,;t t
s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
s,@DEFS@,$DEFS,;t t
s,@LIBS@,$LIBS,;t t
s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
s,@INSTALL_DATA@,$INSTALL_DATA,;t t
s,@PACKAGE@,$PACKAGE,;t t
s,@VERSION@,$VERSION,;t t
s,@ACLOCAL@,$ACLOCAL,;t t
s,@AUTOCONF@,$AUTOCONF,;t t
s,@AUTOMAKE@,$AUTOMAKE,;t t
s,@AUTOHEADER@,$AUTOHEADER,;t t
s,@MAKEINFO@,$MAKEINFO,;t t
s,@SET_MAKE@,$SET_MAKE,;t t
s,@AT_SPI_MAJOR_VERSION@,$AT_SPI_MAJOR_VERSION,;t t
s,@AT_SPI_MINOR_VERSION@,$AT_SPI_MINOR_VERSION,;t t
s,@AT_SPI_MICRO_VERSION@,$AT_SPI_MICRO_VERSION,;t t
s,@AT_SPI_INTERFACE_AGE@,$AT_SPI_INTERFACE_AGE,;t t
s,@AT_SPI_BINARY_AGE@,$AT_SPI_BINARY_AGE,;t t
s,@LT_VERSION_INFO@,$LT_VERSION_INFO,;t t
s,@LT_RELEASE@,$LT_RELEASE,;t t
s,@LT_CURRENT@,$LT_CURRENT,;t t
s,@LT_REVISION@,$LT_REVISION,;t t
s,@LT_AGE@,$LT_AGE,;t t
s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
s,@MAINT@,$MAINT,;t t
s,@INTLTOOL_DESKTOP_RULE@,$INTLTOOL_DESKTOP_RULE,;t t
s,@INTLTOOL_DIRECTORY_RULE@,$INTLTOOL_DIRECTORY_RULE,;t t
s,@INTLTOOL_KEYS_RULE@,$INTLTOOL_KEYS_RULE,;t t
s,@INTLTOOL_OAF_RULE@,$INTLTOOL_OAF_RULE,;t t
s,@INTLTOOL_PONG_RULE@,$INTLTOOL_PONG_RULE,;t t
s,@INTLTOOL_SERVER_RULE@,$INTLTOOL_SERVER_RULE,;t t
s,@INTLTOOL_SHEET_RULE@,$INTLTOOL_SHEET_RULE,;t t
s,@INTLTOOL_SOUNDLIST_RULE@,$INTLTOOL_SOUNDLIST_RULE,;t t
s,@INTLTOOL_UI_RULE@,$INTLTOOL_UI_RULE,;t t
s,@INTLTOOL_XML_RULE@,$INTLTOOL_XML_RULE,;t t
s,@INTLTOOL_CAVES_RULE@,$INTLTOOL_CAVES_RULE,;t t
s,@INTLTOOL_EXTRACT@,$INTLTOOL_EXTRACT,;t t
s,@INTLTOOL_MERGE@,$INTLTOOL_MERGE,;t t
s,@INTLTOOL_UPDATE@,$INTLTOOL_UPDATE,;t t
s,@INTLTOOL_PERL@,$INTLTOOL_PERL,;t t
s,@CC@,$CC,;t t
s,@CFLAGS@,$CFLAGS,;t t
s,@LDFLAGS@,$LDFLAGS,;t t
s,@CPPFLAGS@,$CPPFLAGS,;t t
s,@ac_ct_CC@,$ac_ct_CC,;t t
s,@EXEEXT@,$EXEEXT,;t t
s,@OBJEXT@,$OBJEXT,;t t
s,@GNOME_ACLOCAL_DIR@,$GNOME_ACLOCAL_DIR,;t t
s,@GNOME_ACLOCAL_FLAGS@,$GNOME_ACLOCAL_FLAGS,;t t
s,@INSIDE_GNOME_DOCU_TRUE@,$INSIDE_GNOME_DOCU_TRUE,;t t
s,@INSIDE_GNOME_DOCU_FALSE@,$INSIDE_GNOME_DOCU_FALSE,;t t
s,@PKG_CONFIG@,$PKG_CONFIG,;t t
s,@PLATFORM_GNOME_2_TRUE@,$PLATFORM_GNOME_2_TRUE,;t t
s,@PLATFORM_GNOME_2_FALSE@,$PLATFORM_GNOME_2_FALSE,;t t
s,@GNOME_INTERFACE_VERSION@,$GNOME_INTERFACE_VERSION,;t t
s,@WARN_CFLAGS@,$WARN_CFLAGS,;t t
s,@build@,$build,;t t
s,@build_cpu@,$build_cpu,;t t
s,@build_vendor@,$build_vendor,;t t
s,@build_os@,$build_os,;t t
s,@host@,$host,;t t
s,@host_cpu@,$host_cpu,;t t
s,@host_vendor@,$host_vendor,;t t
s,@host_os@,$host_os,;t t
s,@LN_S@,$LN_S,;t t
s,@ECHO@,$ECHO,;t t
s,@RANLIB@,$RANLIB,;t t
s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
s,@STRIP@,$STRIP,;t t
s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
s,@CPP@,$CPP,;t t
s,@LIBTOOL@,$LIBTOOL,;t t
s,@GTKDOC@,$GTKDOC,;t t
s,@ENABLE_GTK_DOC_TRUE@,$ENABLE_GTK_DOC_TRUE,;t t
s,@ENABLE_GTK_DOC_FALSE@,$ENABLE_GTK_DOC_FALSE,;t t
s,@X_CFLAGS@,$X_CFLAGS,;t t
s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t
s,@X_LIBS@,$X_LIBS,;t t
s,@X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t
s,@LIBSPI_CFLAGS@,$LIBSPI_CFLAGS,;t t
s,@LIBSPI_LIBS@,$LIBSPI_LIBS,;t t
s,@REGISTRYD_CFLAGS@,$REGISTRYD_CFLAGS,;t t
s,@REGISTRYD_LIBS@,$REGISTRYD_LIBS,;t t
s,@TESTS_CFLAGS@,$TESTS_CFLAGS,;t t
s,@TESTS_LIBS@,$TESTS_LIBS,;t t
s,@UTILS_CFLAGS@,$UTILS_CFLAGS,;t t
s,@UTILS_LIBS@,$UTILS_LIBS,;t t
s,@ATK_BRIDGE_CFLAGS@,$ATK_BRIDGE_CFLAGS,;t t
s,@ATK_BRIDGE_LIBS@,$ATK_BRIDGE_LIBS,;t t
s,@LIBCSPI_CFLAGS@,$LIBCSPI_CFLAGS,;t t
s,@LIBCSPI_LIBS@,$LIBCSPI_LIBS,;t t
s,@ORBIT_IDL@,$ORBIT_IDL,;t t
s,@BONOBO_ACTIVATION_IDL_DIR@,$BONOBO_ACTIVATION_IDL_DIR,;t t
s,@LIBBONOBO_IDL_DIR@,$LIBBONOBO_IDL_DIR,;t t
s,@XTST_LIBS@,$XTST_LIBS,;t t
s,@POPT_LIBS@,$POPT_LIBS,;t t
CEOF

EOF

  cat >>$CONFIG_STATUS <<\EOF
  # Split the substitutions into bite-sized pieces for seds with
  # small command number limits, like on Digital OSF/1 and HP-UX.
  ac_max_sed_lines=48
  ac_sed_frag=1 # Number of current file.
  ac_beg=1 # First line for current file.
  ac_end=$ac_max_sed_lines # Line after last line for current file.
  ac_more_lines=:
  ac_sed_cmds=
  while $ac_more_lines; do
    if test $ac_beg -gt 1; then
      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
    else
      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
    fi
    if test ! -s $tmp/subs.frag; then
      ac_more_lines=false
    else
      # The purpose of the label and of the branching condition is to
      # speed up the sed processing (if there are no `@' at all, there
      # is no need to browse any of the substitutions).
      # These are the two extra sed commands mentioned above.
      (echo ':t
  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
      if test -z "$ac_sed_cmds"; then
  	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
      else
  	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
      fi
      ac_sed_frag=`expr $ac_sed_frag + 1`
      ac_beg=$ac_end
      ac_end=`expr $ac_end + $ac_max_sed_lines`
    fi
  done
  if test -z "$ac_sed_cmds"; then
    ac_sed_cmds=cat
  fi
fi # test -n "$CONFIG_FILES"

EOF
cat >>$CONFIG_STATUS <<\EOF
for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case $ac_file in
  - | *:- | *:-:* ) # input from stdin
        cat >$tmp/stdin
        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
  * )   ac_file_in=$ac_file.in ;;
  esac

  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
  ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
         X"$ac_file" : 'X\(//\)[^/]' \| \
         X"$ac_file" : 'X\(//\)$' \| \
         X"$ac_file" : 'X\(/\)' \| \
         .     : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    { case "$ac_dir" in
  [\\/]* | ?:[\\/]* ) as_incr_dir=;;
  *)                      as_incr_dir=.;;
esac
as_dummy="$ac_dir"
for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
  case $as_mkdir_dir in
    # Skip DOS drivespec
    ?:) as_incr_dir=$as_mkdir_dir ;;
    *)
      as_incr_dir=$as_incr_dir/$as_mkdir_dir
      test -d "$as_incr_dir" || mkdir "$as_incr_dir"
    ;;
  esac
done; }

    ac_dir_suffix="/`echo $ac_dir|sed 's,^\./,,'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo "$ac_dir_suffix" | sed 's,/[^/]*,../,g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case $srcdir in
  .)  ac_srcdir=.
      if test -z "$ac_dots"; then
         ac_top_srcdir=.
      else
         ac_top_srcdir=`echo $ac_dots | sed 's,/$,,'`
      fi ;;
  [\\/]* | ?:[\\/]* )
      ac_srcdir=$srcdir$ac_dir_suffix;
      ac_top_srcdir=$srcdir ;;
  *) # Relative path.
    ac_srcdir=$ac_dots$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_dots$srcdir ;;
  esac

  case $INSTALL in
  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
  *) ac_INSTALL=$ac_dots$INSTALL ;;
  esac

  if test x"$ac_file" != x-; then
    { echo "$as_me:9462: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
    rm -f "$ac_file"
  fi
  # Let's still pretend it is `configure' which instantiates (i.e., don't
  # use $as_me), people would be surprised to read:
  #    /* config.h.  Generated automatically by config.status.  */
  configure_input="Generated automatically from `echo $ac_file_in |
                                                 sed 's,.*/,,'` by configure."

  # First look for the input files in the build tree, otherwise in the
  # src tree.
  ac_file_inputs=`IFS=:
    for f in $ac_file_in; do
      case $f in
      -) echo $tmp/stdin ;;
      [\\/$]*)
         # Absolute (can't be DOS-style, as IFS=:)
         test -f "$f" || { { echo "$as_me:9480: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
         echo $f;;
      *) # Relative
         if test -f "$f"; then
           # Build tree
           echo $f
         elif test -f "$srcdir/$f"; then
           # Source tree
           echo $srcdir/$f
         else
           # /dev/null tree
           { { echo "$as_me:9493: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
         fi;;
      esac
    done` || { (exit 1); exit 1; }
EOF
cat >>$CONFIG_STATUS <<EOF
  sed "$ac_vpsub
$extrasub
EOF
cat >>$CONFIG_STATUS <<\EOF
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s,@configure_input@,$configure_input,;t t
s,@srcdir@,$ac_srcdir,;t t
s,@top_srcdir@,$ac_top_srcdir,;t t
s,@INSTALL@,$ac_INSTALL,;t t
" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
  rm -f $tmp/stdin
  if test x"$ac_file" != x-; then
    mv $tmp/out $ac_file
  else
    cat $tmp/out
    rm -f $tmp/out
  fi

done
EOF
cat >>$CONFIG_STATUS <<\EOF

#
# CONFIG_HEADER section.
#

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s,^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
ac_dB='[ 	].*$,\1#\2'
ac_dC=' '
ac_dD=',;t'
# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_uA='s,^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_uB='$,\1#\2define\3'
ac_uC=' '
ac_uD=',;t'

for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case $ac_file in
  - | *:- | *:-:* ) # input from stdin
        cat >$tmp/stdin
        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
  * )   ac_file_in=$ac_file.in ;;
  esac

  test x"$ac_file" != x- && { echo "$as_me:9554: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}

  # First look for the input files in the build tree, otherwise in the
  # src tree.
  ac_file_inputs=`IFS=:
    for f in $ac_file_in; do
      case $f in
      -) echo $tmp/stdin ;;
      [\\/$]*)
         # Absolute (can't be DOS-style, as IFS=:)
         test -f "$f" || { { echo "$as_me:9565: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
         echo $f;;
      *) # Relative
         if test -f "$f"; then
           # Build tree
           echo $f
         elif test -f "$srcdir/$f"; then
           # Source tree
           echo $srcdir/$f
         else
           # /dev/null tree
           { { echo "$as_me:9578: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
         fi;;
      esac
    done` || { (exit 1); exit 1; }
  # Remove the trailing spaces.
  sed 's/[ 	]*$//' $ac_file_inputs >$tmp/in

EOF

# Transform confdefs.h into two sed scripts, `conftest.defines' and
# `conftest.undefs', that substitutes the proper values into
# config.h.in to produce config.h.  The first handles `#define'
# templates, and the second `#undef' templates.
# And first: Protect against being on the right side of a sed subst in
# config.status.  Protect against being in an unquoted here document
# in config.status.
rm -f conftest.defines conftest.undefs
# Using a here document instead of a string reduces the quoting nightmare.
# Putting comments in sed scripts is not portable.
#
# `end' is used to avoid that the second main sed command (meant for
# 0-ary CPP macros) applies to n-ary macro definitions.
# See the Autoconf documentation for `clear'.
cat >confdef2sed.sed <<\EOF
s/[\\&,]/\\&/g
s,[\\$`],\\&,g
t clear
: clear
s,^[ 	]*#[ 	]*define[ 	][ 	]*\(\([^ 	(][^ 	(]*\)([^)]*)\)[ 	]*\(.*\)$,${ac_dA}\2${ac_dB}\1${ac_dC}\3${ac_dD},gp
t end
s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	][^ 	]*\)[ 	]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
: end
EOF
# If some macros were called several times there might be several times
# the same #defines, which is useless.  Nevertheless, we may not want to
# sort them, since we want the *last* AC-DEFINE to be honored.
uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
rm -f confdef2sed.sed

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >>conftest.undefs <<\EOF
s,^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
EOF

# Break up conftest.defines because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
echo '  if egrep "^[ 	]*#[ 	]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
echo '  :' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.defines >/dev/null
do
  # Write a limited-size here document to $tmp/defines.sed.
  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
  # Speed up: don't consider the non `#define' lines.
  echo '/^[ 	]*#[ 	]*define/!b' >>$CONFIG_STATUS
  # Work around the forget-to-reset-the-flag bug.
  echo 't clr' >>$CONFIG_STATUS
  echo ': clr' >>$CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
  echo 'CEOF
  sed -f $tmp/defines.sed $tmp/in >$tmp/out
  rm -f $tmp/in
  mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
  rm -f conftest.defines
  mv conftest.tail conftest.defines
done
rm -f conftest.defines
echo '  fi # egrep' >>$CONFIG_STATUS
echo >>$CONFIG_STATUS

# Break up conftest.undefs because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.undefs >/dev/null
do
  # Write a limited-size here document to $tmp/undefs.sed.
  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
  # Speed up: don't consider the non `#undef'
  echo '/^[ 	]*#[ 	]*undef/!b' >>$CONFIG_STATUS
  # Work around the forget-to-reset-the-flag bug.
  echo 't clr' >>$CONFIG_STATUS
  echo ': clr' >>$CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
  echo 'CEOF
  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
  rm -f $tmp/in
  mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
  rm -f conftest.undefs
  mv conftest.tail conftest.undefs
done
rm -f conftest.undefs

cat >>$CONFIG_STATUS <<\EOF
  # Let's still pretend it is `configure' which instantiates (i.e., don't
  # use $as_me), people would be surprised to read:
  #    /* config.h.  Generated automatically by config.status.  */
  if test x"$ac_file" = x-; then
    echo "/* Generated automatically by configure.  */" >$tmp/config.h
  else
    echo "/* $ac_file.  Generated automatically by configure.  */" >$tmp/config.h
  fi
  cat $tmp/in >>$tmp/config.h
  rm -f $tmp/in
  if test x"$ac_file" != x-; then
    if cmp -s $ac_file $tmp/config.h 2>/dev/null; then
      { echo "$as_me:9695: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
    else
      ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
         X"$ac_file" : 'X\(//\)[^/]' \| \
         X"$ac_file" : 'X\(//\)$' \| \
         X"$ac_file" : 'X\(/\)' \| \
         .     : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
        { case "$ac_dir" in
  [\\/]* | ?:[\\/]* ) as_incr_dir=;;
  *)                      as_incr_dir=.;;
esac
as_dummy="$ac_dir"
for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
  case $as_mkdir_dir in
    # Skip DOS drivespec
    ?:) as_incr_dir=$as_mkdir_dir ;;
    *)
      as_incr_dir=$as_incr_dir/$as_mkdir_dir
      test -d "$as_incr_dir" || mkdir "$as_incr_dir"
    ;;
  esac
done; }

      fi
      rm -f $ac_file
      mv $tmp/config.h $ac_file
    fi
  else
    cat $tmp/config.h
    rm -f $tmp/config.h
  fi
done
EOF
cat >>$CONFIG_STATUS <<\EOF

#
# CONFIG_COMMANDS section.
#
for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`

  case $ac_dest in
    default-1 ) test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h ;;
    default-2 )

sed -e "s:@INTLTOOL_PERL@:${INTLTOOL_PERL}:;" < ${srcdir}/intltool-extract.in > intltool-extract.out
if cmp -s intltool-extract intltool-extract.out 2>/dev/null; then
  rm -f intltool-extract.out
else
  mv -f intltool-extract.out intltool-extract
fi
chmod ugo+x intltool-extract
chmod u+w intltool-extract

sed -e "s:@INTLTOOL_PERL@:${INTLTOOL_PERL}:;" < ${srcdir}/intltool-merge.in > intltool-merge.out
if cmp -s intltool-merge intltool-merge.out 2>/dev/null; then
  rm -f intltool-merge.out
else
  mv -f intltool-merge.out intltool-merge
fi
chmod ugo+x intltool-merge
chmod u+w intltool-merge

sed -e "s:@INTLTOOL_PERL@:${INTLTOOL_PERL}:;" < ${srcdir}/intltool-update.in > intltool-update.out
if cmp -s intltool-update intltool-update.out 2>/dev/null; then
  rm -f intltool-update.out
else
  mv -f intltool-update.out intltool-update
fi
chmod ugo+x intltool-update
chmod u+w intltool-update

 ;;
  esac
done
EOF

cat >>$CONFIG_STATUS <<\EOF

{ (exit 0); exit 0; }
EOF
chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save

# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded.  So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status.  When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
  ac_cs_success=:
  exec 5>/dev/null
  $SHELL $CONFIG_STATUS || ac_cs_success=false
  exec 5>>config.log
  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
  # would make configure fail if this is the last instruction.
  $ac_cs_success || { (exit 1); exit 1; }
fi

echo "AT-SPI setup:

	Source code location:	${srcdir}
	Compiler:		${CC}
	Prefix:			${prefix}

	Welcome to the wonderful world of Accessibility.
	   http://developer.gnome.org/projects/gap/
"
