Channel scope
Shows signal strengths (SG) of the channels of the selected bank.
(Select bank on the channel data page). Scope does not show SG values of the lockout channels.
X-Axis: channel number between 1 -50 (within selected bank).
Y-Axis: SG values between 0 - 200.
Save button/menu item saves channel scope data into the selected file.
Mouse left click on the selected S-bar stops sweeping (if active) and tunes to the channel plus shows
channel information on the status bar. Mouse right click on the channel scope area starts sweeping.
Relation between SG and S-meter bar values
0 - 55 = 0 bars
56 - 60 = 1 bar
61 - 80 = 2 bars
81 - 95 = 3 bars
96 - 125 = 4 bars
126 - 140 = 5 bars
> 140 = 6 bars
(No apparent relation to when the squelch opens)
MARKS
Sets Y value marks ON/OFF.
PEAK HOLD
Holds greatest SG values of all channels or one selected channel.
SWEEP
SWEEP ON: Scanner does not stop on active channels.
SWEEP OFF: Scanner stops on active channel and continues scanning when squelch is closed.
FAST
When set to ON, provides a bit better scope performance. If CC780/channel scope hangs up, turn the setting OFF.
STATUS
When set to ON, scope channel number, memory bank channel number and frequency are shown
on the statusbar when mouse is moved over S-bars.
MULTICOLOR
Sets multicolored bars ON/OFF.
3D
Sets scope 3D FX ON/OFF.
AVG
Sets average value indicator ON/OFF.
MAX
Sets maximum value indicator ON/OFF.
START
Starts channel scope.
STOP
Stops channel scope.
SAVE
Saves channel scope as bitmap/enhanced metafile (chscope.bmp/wmf) into the current directory.
PRINT
Prints channel scope.
PROP
Sets proportional printing ON/OFF.
Back to Help topics